Search
Products meeting the search criteria
The strap of the ex-East German army (DDR, Deutsche Demokratische Republik). It's similar to the waist belt of the Wehrmacht in design, the same width (4.5 cm) but not interchangeable. The belt has a bracket at the end, it clings to the buckle's hook. It can be worn only with its buckle. Leather is smooth side out (on the belts of Wehrmacht it is the smooth side inside, so as not to wipe with a cloth uniform on the belt). The principle of fastening and orientation of the skin are taken from the belt of the red Army of that time (the troops of the DDR were part of the Socialist Block).It is theoretically possible to alter this belt to the belt of the Wehrmacht, to do so, sew it again with leather smooth side inside and install the hook (you can buy the hook by us). Without alteration is a g..
9.00 €
Oak leaves with swords for the Knight's cross of the Iron cross. Size 29x25 mm. Nice quality copy made on industrial equipment, what distinguishes it from artisanal remelting copies...
15.00 €
The "Zeltbahn" cape-tent is made of dense cotton material. Autumn colours (brown-orange) on one side and summer colours (green leaves on the ground) on another. Aluminum buttons. The ropes for pegs that used during tent installation, you can find among the related products at the bottom of the page. Whether the Zeltbahn is waterproof? At the beginning of the XX century, the material for tents was a dense fabric: the tighter lay the threads to each other during the creation of the fabric, the worse it passes water. It's about drops of water or rain, they flow down from the surface of the tent, and do not seep inside. But at the same time the tent does not remain dry, the threads from which the fabric is made, absorb water and become wet. That's enough to get shelter from the ra..
89.00 €
The cap is made in Russia from material produced in Russia. The camouflage is a neat and complete copy of the "Oakleaf A" pattern, almost 1x0.5 meters in size, without repeating the pattern, so there cannot be two identical caps. Very high quality camouflage pattern with the correct form of spots.The fabric is a copy of the German tent fabric (Zeltbahn) and corresponds to it in terms of texture and properties. Repels water due to the tight weave of the threads, just like the original fabric. Does not shine through in the sun. Like the original fabric, it is not waterproof: rain resistance is due to the swelling of the threads under the influence of moisture, which create a very dense surface.The cap is double-sided, fully reversible: on one side, the camouflage is made in summer (gree..
30.00 €
Helmet cover in camouflage "Oakleaf", for Waffen-SS troops. Double-sided, invertible: green shades for summer and brown shades for autumn. It has loops for attaching branches and grass for camouflage, such began to be sewn to the covers since 1942. It is attached to the helmet with three metal hooks and a special pocket for the visor. Dense cotton fabric. Colors of camouflage are not bright.Suitable for helmets 64 and 66 (head 56...59), in the photo he is wearing a helmet 66. You can pull on a helmet 68...
20.00 €
The uniform of the German army elite in the last years of the war.Firm cotton fabric, dull camouflage colors, good for spring forest. The fabric is double-sided, but the jacket is not reversible. This is a historical feature: the suit was not planned to be reversible, but at first it was made from available fabric stocks, intended for camouflage blouses. These had different colors of camouflage on different sides...
79.00 €
The uniform of the German army elite in the last years of the war. Jackets and pants in the "Oakleaf" camouflage in this form will no longer be produced, we sell what we have in stock. But we have (and will offer) other "Oakleaf" suits. If there is no suitable size in this product, then it is most likely in another similar product.Firm cotton fabric, bright camouflage colours. The fabric is double-sided, but the jacket is not reversible. This is a historical feature: the suit was not planned to be reversible, but at first it was made from available fabric stocks, intended for camouflage blouses. These had different colors of camouflage on different sides...
79.00 €
Pants for the "Oakleaf" suit.2 side pockets, front pocket for a watch/compass. Pants can be worn with a belt or suspenders (you may have to sew more buttons to wear suspenders, buttons can be purchased from us or simply use conventional plastic). 2 tabs with buckles at the back for waist tightening. The pants-legs have tabs; their ends go in the slots at the bottom of the leg. They do not allow pants-legs to lift up and pull them on the ankle at the same time.Price for 1 pants. Other items that can be seen in the photos are given for understanding the color and size of the product, are not included in the price of this product, but are sold as separate products on our website.Attention! If you plan to wear these trousers with suspenders, you should buy 4 buttons 17 mm (metal or ..
79.00 €
A copy of the SS camo smock model 1940 (the so-called 1st model) in camouflage "Oak" (Eichenlaubmuster). The blouse has slots on the chest for access to the pockets of the field blouse. There are no pockets on the smock itself. The blouse is completely invertible, two-sided (green shades for summer on one side and brown shades for autumn on the other side). The fabric is thick and dense. Since 1940, the elastic band on the neck has disappeared and the front opening with lacing has become more elegant and functional. Since 1941, such models were sewn from fabric in camouflage "Oak". Early blouses (before 1943) are characterized by a short skirt, which it was customary to tuck up under the belt to have a tightened look...
99.00 €
A copy of the SS smock (blouse) model 1942 (the so-called 2nd model) in the camouflage "Oakleaf" (Eichenlaubmuster). There are pockets with flaps on button under the waistband of the smock. No slits on the chest (for access to the pockets of the field jacket, as it was on the 1st model).The smock is completely reversible, double-sided (one side is in green shades for summer and on the other is in brown for autumn)...
99.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.A great copy of the breast eagle insignia for the Heer tunic. Silver thread on a dark green background. The patch is made by BeVo technology specifically for our store and bear the Replika logo. The eagle reproduced as detailed as possible. A rare thing!To see additional photos please follow the link.We have been creating copies of the in..
7.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Collar-tabs of an SS officer of the 3rd SS Panzer Division "Totenkopf". There is a skull on the right tab (along the collar-tab). Edging made of twisted silver cord.How to sew collar tabs on? Put a collar tab on the collar of the service jacket so ..
12.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.The cuff tapes are embroidered with metal thread (natural metal is cold to the touch). Such armbands were worn by SS officers.Select the armband you need next to the "Add to cart" button. Click "Add to cart" to put the band in the basket (incl..
4.00 €
The copy of the field mapcase (German: Meldekartentasche) for Wehrmacht and SS officers. Made of high quality surface dyed leather with correct grain size, all cuts are finished. The color is black on the outside, brown on the inside. No manufacturer's marks.On the back side are sewn leather straps for fastening on a waist belt. The fittings are steel, painted black.It was used for placing maps and other documents. Such model was widespread after 1940...
43.00 €
The body is made of metal thread (cold to the touch), silk edging, the base of black cloth. Usually the base of black cloth had the shoulder boards of SS officers, and in the Heer officer shouder boards had the base in the color of the military branch; its edge was visible from the side, so a separate colored piping, as in the SS, was not used.Price for a pair (set) of shoulder straps. Buttons for officer shoulder straps (on the screw) are sold separately, see recommended products at the bottom of the page.We offer the following options:- Yellow (on black base) — cavalry, motorized reconnaissance (SS),- Red — artillery (Heer),- Red (on black base) — artillery (SS),- Blue (cornflower blue) — medical troops (without the snake sign),- Medic (cornflower blue) with the snake sign (the edge..
6.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The eagle is embroidered with silver metallic gimp on cloth. Classic Luftwaffe officer's breast eagle. Size 10x5 cm.To see additional photos please follow the link.How to sew the patch? Attach the patch to the uniform so that it sits well. Glue the patch or fasten it in another way (for example, stitch it with a thread of noticeable ..
15.00 €
High-quality copy, dense embroidery without shaggy threads on the inside. The inscription-abbreviation O. T. and between them a swastika in a circle. The abbreviation stands for Organization Todt, woven with gray thread on a dark blue background. Length about 55cm, width about 4cm...
21.00 €
Bag for RGD-33 (РГД-33) grenades of the Red army. Burlap material. Badly read manufacturer's stamp. Steel galvanized buckle. Original...
40.00 €
The side-cap or Pilotka ("pilot cap" in Russian) is made of khaki cotton, double "diagonal" (shareware). Different manufacturer stamps for the 1970s. The cap is completely identical to those produced in the 1940s, suitable for reenactment and collections for the Second World War.A star was attached to the cap on the front. Depending on the period, it could be red enamel, stamped and painted in green paint, stamped with a thin layer of red enamel paint, etc... Stars for caps are sold separately in our store.Size 57 on the cap is marked as 56, in fact it is really 57 (even more), and we sell it as 57! The remaining sizes as per markings...
15.75 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Cuff titles in BeVo technique (jacquard), grey-white thread on black underground.Choose a band you need near "Add to cart" button. If you see the band in the picture but it isn't in the list (you can't choose it), that means the band is sold and no rest..
4.00 €
One rim 66/59 has a dimensional stamp, connected to the ring by rivets.Outer rim for M31 German liner for M35 helmets, suitable for M40. Made of aluminium, it comes unassembled, which allows you to assemble it together with other parts without stuffing them, without the risk of damage.Rivets for assembly (requires 2 pieces) are sold separately (see Featured Products below). Earrings for the chinstrap are not riveted and are not included. They can also be purchased separately.Our "constructor" allows you to repair original liners by replacing them piece by piece.No labels. Without side reinforcements (early model)...
12.00 €
The main clothing of the German soldier of the Second World War. Model 1940 with main fabric collar. Suitable for reenactment of any period of the Second World War after 1940.Great fabric: dense, not thick (as it happens on some copies), good melange color, excellent factory quality, not handicraft. Cotton fabric lining.Excellent fittings: aluminum buttons, painted in a baked Feldgrau colour, so that the paint does not chip or peel off. Very decent and accurate copy.The overcoat is sold without insignia and without shoulder boards, you can buy insignia separately in our store.The L size overcoat is designed to be worn over an L size tunic...
130.00 €
The product kit includes 3 sachets for condoms and a cardboard box.Condoms themselves are not supplied for hygiene reasons. Condoms at that time looked the same as now.All packaging is copied from the original and printed by typography. For use in the reenactment and for the collection, decoration of military historical stands.The package is labeled Doppelt geprüft (double checked), SONDERPACKUNG (special packaging) and 3 Jahre Lagerfähig (3 years of stock storage is possible). The box also contains the manufacturer's name Otto Dillnger G. m. b. H., Leipzig.On the back of the box is the following text: Achtung! Alle unter dem Namen Odilei in den Handel gebrachten Gummiwaren sind erstklassig warm vulkanislert und jahrelang lagerfähig. Verlangen Sie deshalb beim Einkauf ausdrücklich O d i l ..
5.00 €
A copy of the packaging for processed cheese Tilsiter ADA (Tilsiter ADA) is an aluminum tube that can be filled with processed cheese and packaged, thus obtaining an analogue of the cheese packaging that was included in the rations of various military units of the Wehrmacht.We offer 2 packaging options to choose from• "Tilsiter ADA", 20% fat content, weight 125 grams, year 1940.• "Tilsiter BONA", 20% fat content, weight 125 grams, year 1944.The product does not include cheese or other food items. The set is intended for museums, film production and military history reenactors. Now, during the reconstruction (game imitation of the battle), resting on a halt after a long transition, you can treat your comrades with an authentic soldier's ration!The price is for 1 tube...
3.00 €
The product kit includes 3 sachets for condoms and a cardboard box.Condoms themselves are not supplied for hygiene reasons. Condoms at that time looked the same as now.All packaging is copied from the original and printed by typography. For use in the reenactment and for the collection, decoration of military historical stands.Vulkan condoms from the Sanex brand. The box reads: Diese Packung, deren Inhalt die hochwertigen Qualitötseigenschaften der bestbekannten VULKAN-SANEX - ARTIKEL aufweist, darf nur Angehörige von Formationen der Wehrmacht zu einem billigeren Preise abgegeben werden. Die Weiterdieser Packung an andere Personen ist unzulässig. Which means: This package, which contains high-quality and well-known VULKAN-SANEX-PRODUCTS can only be issued at a cheaper price to military per..
5.00 €
Original army cotton pants mod. 1932, sewn after the war (1970s). Suitable for the reenactment of the Red Army and, of course, they can be used as warm, light and comfortable winter clothes. Dimensions are given in growth-numbers (Soviet system). The larger the number, the larger the size (volume) of the product.Do not confuse these quilted pants with those in military shops of wider assortment and souvenir stores! They sell copies sewn in our time from modern fabric: both in composition and in the way of weaving. But we offer things made in the USSR according to pre-war patterns.Pants are new, not used, from military stocks. As can be seen in the photo, the fabric on different pants can be lighter or darker, the color and material of the lining can be different, different stamps can ..
70.00 €
Painted boots, devices for painting are not included in the price and are given to illustrate the painting process! The price is for 1 jar of paint, volume of 45 ml. We do not paint shoes to order.1 pair of boots needs ≈200 ml (4-5 jars) to be fully dyed. Lace-boots need ≈130 ml (3 jars). To tint the shoes, 1 jar is enough.Technology is the same as Germans in 1930-s did. They dyed ready-made shoes. Vegetable tanned skin was used for boots producing and mint boots had tan (beige, brown) colour. Put the paint with a brush layer by layer and soak leather well.Greasing is obligatory for vegetable tanned leather before the first use, otherwise boots will crack and fall apart. You should support it as well, putting grease or oil every time after it got wet. You can use a mixture of grease and wa..
2.00 €
Original buttons for shoulder straps of the Red Army (shoulder straps' button are larger than usual for field shirt). Diameter 19 mm (7½ in). Made entirely of steel in three parts, as the originals: the base, the cover (with a star with a hammer and sickle) and the leg, which is dangling in the base. Great for Red Army field uniforms.Price for 1 pair of buttons...
6.00 €
Very good copy of cartridge bags for the Mauser 98 rifle and Mauser 98k carbine. Looks like original mint. Leather of surface dyeing is 2 mm thick (for lids and pockets) and 3 mm thick (for the back wall and straps) is used. Granulation of the correct size is on the surface. The color is black on the outside and natural beige from the inside. All cuts are finished with a clear varnish. Metal parts are aluminum, accurately repeating the original to the smallest detail. There are dividers in each pocket, made not of ordinary leather (as on cheap copies) but of hard material. Stamped KURT WEHNER 1939 MÜNCHEN on the back side.Sure you can use original pouches for the reenactment, but they have one big drawback: the tongues often come off. Even more, the “old” pouches, even if they ar..
130.00 €
Very good copy of cartridge bags for the Mauser 98 rifle and Mauser 98k carbine. Looks like original mint. Leather of surface dyeing is 2 mm thick (for lids and pockets) and 3 mm thick (for the back wall and straps) is used. Granulation of the correct size is on the surface. The color is black on the outside and natural beige from the inside. All cuts are finished with a clear varnish. Metal parts are steel, accurately repeating the original to the smallest detail. The surface of the fittings is chemically treated (burnishing) to prevent corrosion. On the originals, this was done in the same way (sometimes the fittings could simply be painted). Stamped RB.Nr. 0/0146/0043 (manufacturer number) on the back side. As for the dividers in the pockets, they were abse..
140.00 €
A very good copy of buttons for officers' shoulder boards. Made of 4 parts: the base, the cover with a granular surface, threaded leg and nut, that should be sewn to the uniform. Diameter is 17 mm, a little less than buttons for field blouse, as it should be.We offer buttons for officers (silver) and generals (gold). If silver is not available, then you can take gold and paint them.Price per pair, sold in pairs...
15.00 €
The button is assembled from three parts: top, bottom and leg. Buttons are painted in a dark shade of feldgrau. Button has no manufacturer's stamp.German uniform button made of aluminum - the copy of the 19 mm button, which was used in the Third Reich for a variety of military uniforms.The buttons are dyed in the dark field grey. Buttons without marks. On the upper side of the button, a number (in Arabic numeral) from 1 to 9 is embossed, and 6 and 9 are different buttons (they have a dot next to the number to distinguish them). Other numbers can be ordered, but the price will be twice as high, the waiting time is 2 months.Buttons of very high quality, made of aluminum, consist of three parts: top, bottom and stem (just like the original ones). Cheap copies are usually cast entirely f..
17.00 €
Front hooks for a German mountain backpack. Clearance width 27 mm (for a 25 mm belt). Original item!There are paired hooks on one manufacturer's stamp (price per pair), there are hooks without a pair (price for 1 hook). The price is calculated automatically when you select an option next to the "Add to cart" button.Material is aluminum, various brands (pair hooks): D&C, WG, L&F, AG, SC, there are unpaired and without brands. If you are interested in any specific manufacturer's marks, write to us and we'll see which ones are left in stock.The shapes of the hooks had a lot of small differences, which depended both on the manufacturer and on the time of production. There may be traces of repair (visible in the photo), the hooks are ready for use on backpacks for their intended pu..
65.00 €
Pouches for a submachine gun (Maschinenpistole, M.P.) 1938/40 (wrong name Schmeisser). Made of thick canvas with brown leather details. The ring for the Y-strap is sewn into the upper corner. This model was produced until 1941 inclusive. Manufacturer's mark clg and military acceptance stamp with an eagle.Medium quality copy, suitable for cinema and reenactment.The set of pouches consists of right and left. The right and left pouches are mirrored, not interchangeable. The left one has a pocket for a machine for the loading device.The pouches are sold as the set, you can buy only both pouches at once. The price is for the set (per pair) of pouches...
58.00 €
Pouches for a submachine gun (Maschinenpistole, M.P.) 1938/40 (aka Sturmgewehr — sturm/gever, aka Stg.44). Made of thick canvas with brown leather details. The ring for the Y-strap is sewn into the upper corner. There is a ring for the Y-belt in the middle of each pouch. Pouches are connected by a sling with a buckle (tipped over at the back of the belt).The set of pouches consists of right and left. The right and left pouches are mirrored, not interchangeable. The left one has a pocket for a machine for the loading device.The pouches are sold as the set, you can buy only both pouches at once. The price is for the set (per pair) of pouches...
60.00 €
Hooks for German infantry Y-strap. Originals from a stock! Hooks are sorted in pairs (identical) and sold in pairs (price for 2 pcs.). Material steel, painted in matt gray. We have hooks from several manufacturers, they are the same in quality and condition. If this or another manufacturer stamp is important to you, write to us, we'll look what's rest in stock.Hooks had a lot of minor differences in shape, which depended on both the manufacturer and the time of production. For example, the early hooks had a rounded buckle; and later the shape of the buckle became closer to rectangular. The swinging hooks also varied: initially it had variable width (it was narrower at the bend, but wider at the straight sections) and a rather complex shape of the bends. Later, the hook shape became easier ..
65.00 €
Read about the history of this garment and its variants on the tab "Historical reference".Nice copy of model 1938 smock/blouse (also called 1st model). The smock is completely invertible, two-sided (green shades for summer on one side and brown shades for autumn on the other).Smock have a flap covering lace on the chest. The neck was usually tightened with an elastic band, just like the cuffs; this copy does not have a rubber band on the collar. Vertical slits on the chest are for access to the pockets of the uniform and also have flaps. The tips of the sleeves, which should mask the hands, are usually tucked under the elastic. Usually, a smock skirt was tucked under the belt in order to have a smart look...
99.00 €
Made of cotton fabric with thin padding, leatheritte band inside around is aginst sweat, red star of insignia cloth. Enamel star included and installed! ..
45.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.The insignias are made specifically for our store and bear the Replika logo. They have perfect details, no distortion of the shape (as sometimes happens with bad copies), and small details and nuances of embroidery are kept. We have been creating c..
6.00 €
Collar tabs with white stripes (mod. 1935) — for field uniform of the Wehrmacht (Heer) Panzerwaffe (tank units). Very often were sewn not onto the collar, but on a rectangular piece of collar cloth (dark green), which then was attached to the collar with direct machine stiching.Price for 1 pair of collar tabs (a set for one jacket).These BeVo collar tabs (woven) are the total copy of the originals. Original "Litzen" were made in the form of a tape, and before sewing they were cut and bent in a special way to get "reels". The market offers collar tabs made on modern equipment from a thin thread and already cut in the form of reels. Although it is easier to sew such, but they will never give an authentic look like our collar tabs! They will look like paper, with minor errors in the..
9.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.A great copy of the breast eagle insignia for the Heer tunic. Silver thread on a black background. The patch is made by BeVo technology specifically for our store and bear the Replika logo. The eagle reproduced as detailed as possible. A rare thing!We have been creating copies of the insignia for many years, and they are appreciated by re..
7.00 €
Collar tabs of soldiers and NCOs (not officers) of the Wehrmacht. They are not related to the SS, also the emblem in the form of a skull comes from the Hussar emblem and differs from the symbols of the SS.To see additional photos please follow the link.The main field is made of black cloth, the base is made of canvas, the edging is made of pink viscose cord.How to sew collar tabs on? Put a collar tab on the collar of the service jacket so that it is not less than 5 mm from the edge. Fix it with a bright thread (which then remove) or glue. When collar tabs sit properly, they need to be sewn with a thread in colour of the collar by the edge...
19.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.The embroidered parade belt of the Heer. Jacquard canvas of silver and green thread. Aluminum buckle of a special round shape.The size is adjustable like a soldier's belt. The length of the canvas is 95 cm (for a girth of 81-93 cm)...
30.00 €
Sleeve bands of the paratrooper (Fallshirm-Jäger) units number 1 and 3. Embroided with gray thread on dark-green underground...
16.00 €
A set of metal parts for the German bread bag model 1931: central hook with rivet, main and rear rings. Material: steel. Welded rings. All parts are covered with matte gray paint (Stumpfgrau), the standard for steel fittings of the German army...
15.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.We offer high-quality copies of original decals made to order for the Replika store. These copies are an independent development, not a reprint from other copies. Based on the original samples, we have developed a computer model. It was scrupulously worked out: the thickness of the frame, the dimensions and the slopes of the parts were ca..
4.00 €
Insiania is made on viscose fabric. The combination of stripes and leaflets determines the rank. A very good quality. Patches can withstand many washings without losing color.We have made patches for all ranks, except generals (you need to choose rank before buying). If it is impossible to choose a variant near "Add to cart" button, then such variant have already been sold out. The price is for one piece (if you need a set for both shoulders, please take 2 pcs.).Patch selection chartImageHeer rankWaffen-SS rankCorrespondenceUnteroffizierSS-UnterscharführerUnterfeldwebelSS-ScharführerLance SergeantFeldwebelSS-OberscharführerSergeantOberfedwebelSS-HauptscharführerStaff SergeantStabsfeldwebelSS-SturmscharführerSergeant majorLeutnantSS-UntersturmführerLieutenantOberleutnantSS-ObersturmführerSe..
1.00 €
Patches of commanders for wearing on "gimnastyorka" and other clothes of the Red Army. Introduced in 1935, revised in 1940. This option is exactly of the 1940 pattern for use in the reenactment of first years of World War II. Copies of excellent quality.Colonel I. Fedyuninsky, commander of the 24th motorized rifle regiment of the 36th motorized rifle division Photo from the site waffen.ucoz.ru.We offer chevrons:1) junior lieutenant,2) lieutenant,3) senior lieutenant,4) captain,5) major and lieutenant colonel.Price per set (per pair) of characters.Before buying, you need to select the chevrons from the list next to the "Add to cart" button. If the desired option is not there, then it is sold out and may appear later...
9.00 €
Pea concentrate of modern production in a copy of the historical packaging from the Second World War. Suitable for making soup in field conditions during the reenactment of the ordinary life of Wehrmacht soldiers.The package contains 1 briquette weighing 200 grams. This briquette is enough to prepare a bowl of soup on a hike or tactical event.Cooking method:Break up one briquette.Pour it with cold water in a volume of 1.4 liters and mix thoroughly.Bring to a boil, then cook for 15-20 minutes, stirring occasionally.Warm soup is ready!Price for 1 pack. Other items that can be seen in the photos are given for understanding the color and size of the product, are not included in the price of this product, but are sold as separate products on our website.Limitation of seller’s liability.The..
15.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.It is sold without insignia and cord. Add an option and we will install insignias and cord for you. Attention! We install high quality insignias and cord (see photo). We can make finalize the cap for an officer or for soldiers and feldwebel (sergeant). If the necessary parts are not available in the store, then they will have to wait..
59.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.It is sold without insignia and cord. Add an option and we will install insignias and cord for you. Attention! We install high quality insignias and cord (see photo). We can make finalize the cap for an officer or for soldiers and feldwebel (sergeant). If the necessary parts are not available in the store, then they will have to wait..
50.00 €
The peg with a long tip (the part that is inserted into the cover) is intended for bakelite caps. These have thicker top than aluminum caps. In any case, measure the thickness of the top side of your cap before buying the peg.Material — aluminum. The length of the tip is 4 mm, the diameter of the tip is 4 mm, the total length is 13 mm, the diameter of the middle part (on which the strap is put on) is 5 mm.Price for 1 peg.How to install the peg in the cover?The pegs were installed into the bakelite caps with 1 mm margin, and were fixed by a blow. From the blow, the peg expanded and fixed itself. At home, you can fix the peg with epoxy resin (epoxy glue) — this is reliable, safe method and it will give 100% tightness to the cap.Caps from our "Replika" shop, pegs are inserted but no..
3.00 €
The peg with a long tip (the part that is inserted into the cover) is intended for bakelite caps. These have thicker top than aluminum caps. In any case, measure the thickness of the top side of your cap before buying the peg.Material — aluminum. The length of the tip is 8 mm, the diameter of the tip is 4 mm, the total length is 17 mm, the diameter of the middle part (on which the strap is put on) is 5 mm.Price for 1 peg.How to install the peg in the cover?The pegs were installed nip and tuck into the bakelite caps, and were fixed by a blow to the center of the peg (with a pointed metal “finger” like a nail). From the blow, the peg expanded and fixed itself. It should be understood that the impact force was calculated and tested in advance before the production of caps. But when you w..
3.00 €
Brass pegs pins to the holster for the Nagant revolver. Similar ones were used on other holsters.We offer 2 types:-on the holster (cover of the holster) with a convex top;-on the pocket (pocket for cartridges, which is under the lid) the top is more flat.The pegs come with a steel washer (the steel washer was on the originals of the 1930s). The price for 1 peg of any type together with the washer. For 1 holster, you need 2 pegs of different types.You can choose a type next to the Add to Cart button. If some type is available, then it is sold out. We do not produce goods to order, you can only buy what is available.Photo of the holsters taken from the forum popgun.ru for product illustration purposes. Holsters are not for sale, here we offer only pegs to them...
3.50 €
Metal cast badge with silver finish. Assembled from two parts: a wreath (laurel and oak leaves) has silver finish, and the eagle is black (the color of old silver). Pin fastening...
36.00 €
Metal cast badge with silver finish. Assembled from two parts: a wreath (laurel and oak leaves) has golden finish, and the eagle is silver. Pin fastening.Original name: Luftwaffe Flugzeugführer beobachter abzeichen...
35.00 €
Pin (peg, lug) to the German hanger "frog" for bayonet and other equipment. The shape of the head is rounded, flattened. Facilitates opening, designed for many cycles of button-unbutton. The height of the leg is 4 mm, the dimensions without the leg (that is, the size of the peg installed on the product) is approximately 8×8×8 mm.We sell pegs and washers made of aluminum and steel. The material can be selected from the list near the "Add to cart" button. If the desired material is not in the list, then such pegs are over. You can write to us and we will start production.The kit includes a washer. Price for 1 piece (pin + washer)...
3.50 €
Precise and high-quality replica of stud for woolen cover of German field bottle (M31 canteen). The set includes a peg and a washer. You may need a special support for the stud during riveting, otherwise you may bend the stud.We offer a peg and washer made of different materials:- aluminum, with an aluminum washer (these were produced before 1940),- steel, with a steel washer (after 1940).Before ordering, you need to select the option (material). If an option is not available for selection, it means that it has already been sold...
3.50 €
Accurate and high-quality copy of a peg for a German pouch. Aluminum material (for pouches produced before 1940 inclusive). Includes a peg and washer, the price is for 1 peg with a washer (not for a set for the entire pouch).For riveting during installation, you may need a special stop so that the peg does not move upon impact.There were two types of pegs for such pouches: for the central section (rounded tip, "pear" - in the right photo) and for the side sections (sharp tip, "mushroom" - in the left photo). Before ordering, you need to select an option (peg type). If an option is not available for selection, then it has already been sold.Please note that we also sell rivets for these pouches (see Featured Products below)...
3.50 €
Pin (button, lug) for German soldier's Y-strap. For side straps (the rear strap had a longer pin). Leg height is 6 mm, total height 10 mm.The same pin was used in harness for German gasmask canister. You neen 2 pins for one set of straps.We offer these screws made of aluminum or steel: for early and late (production after 1940) Y-straps, respectively. Usually all the parts in one product were made of same metal, but during the early 1940s there was a gradual transition to steel instead of aluminum, and a mixture of parts was encountered. The factories used stocks of what was left over from the 1930s along with new steel parts.The product material must be selected before ordering next to the "Add to cart" button. If some option is not there, then such ones are currently sold out.Price for 1..
3.00 €
Pin (button, lug) for German soldier's Y-strap. For rear strap only (side straps had pins of less height). Leg height is 8 mm, total height 12 mm. Made of aluminum.The same pin was used in harness for German gasmask canister. You neen 2 pins for one set of straps.We offer these screws made of aluminum or steel: for early and late (production after 1940) Y-straps, respectively. Usually all the parts in one product were made of same metal, but during the early 1940s there was a gradual transition to steel instead of aluminum, and a mixture of parts was encountered. The factories used stocks of what was left over from the 1930s along with new steel parts.The product material must be selected before ordering next to the "Add to cart" button. If some option is not there, then such ones are curr..
3.00 €
Pin (peg, lug) to the German equipment strap (Zelt strap, Packungriemen), made of aluminum. The shape is "mushroom", the cap is convex on top, flat on the bottom. It was also used on hanger "frog" for bayonet. The height of the leg is 4 mm, the dimensions without the leg (that is, the size of the peg installed on the product) is approximately 8×8×8 mm.The kit includes an aluminum washer.Price for 1 piece (pin + washer)...
3.50 €
Pin for the German equipment. It was used as the main fastener in the carrier of the foldable shovel, magazine-pouches to the MP-38/40 submachine gun, at the pouch to the muzzle mortar, pouch to the MG machine gun and many other equipment parts. The "pear" shape is ideal for multiple buttoning and unbuttoning. The height of the leg is 4 mm, the dimensions without the leg (that is, the size of the peg installed on the product) is approximately 8×8×8 mm.We sell pegs and washers made of aluminum and steel. The material can be selected from the list near the "Add to cart" button. If the desired material is not in the list, then such pegs are over. You can write to us and we will start production.The kit includes a washer. Price for 1 piece (pin + washer)...
3.50 €
Brass pips with legs, enamel center. We offer pips of junior, middle and senior commanders (not higher). Choose the type and quantity according to the desired rank.Sold in pairs, price per pair...
3.78 €
Brass pips with legs, enamel center. We offer pips of junior, middle and senior commanders (not higher). Choose the type and quantity according to the desired rank.Sold in pairs, price for 1 pair...
3.15 €
The "Zeltbahn" cape-tent is made of dense cotton material. Autumn colours (brown-orange) on one side and summer colours (green leaves on the ground) on another. Aluminum buttons with 3 holes. The ropes for pegs that used during tent installation, you can find among the related products at the bottom of the page. Whether the Zeltbahn is waterproof? At the beginning of the XX century, the material for tents was a dense fabric: the tighter lay the threads to each other during the creation of the fabric, the worse it passes water. It's about drops of water or rain, they flow down from the surface of the tent, and do not seep inside. But at the same time the tent does not remain dry, the threads from which the fabric is made, absorb water and become wet. That's enough to get ..
89.00 €
Our copy of the SS camouflage double-sided cap is made in Russia according to the patterns developed by the Replika shop on the basis of original samples. The fabric is imported, dense cotton material, one side has green shades of spots for summer, the other has brown for autumn. The cap has the correct shape of the bottom (turned over egg). To the right and to the left there are 2 air vents treated with a thread (the metal edging of the holes was rarely found on such caps on the most recent series).In the visor inlay is not afraid of temperature changes, does not break. It's shape-remembering, that is, the visor can be worn bended in any shape you like. Cap can be washed in a washing machine.On the "autumn" side there is a sweat-tape, it also closes the rim of the cap. All this is sewn in..
25.00 €
Our copy of the SS camouflage double-sided cap is made according to the patterns developed by the Replika shop on the basis of original samples. The cap has the correct shape of the bottom (an inverted egg). On the right and on the left, there are 2 air vents, processed with a thread (the metal edging of the holes was rare on such caps and on the latest series).The cap is made in Russia from material produced in Russia. The camouflage is a neat and complete copy of the "Platan 5/6" pattern, almost 2x1.5 meters in size, without repeating the pattern, so there can be no two identical caps. And that is why the "numbers" and "lines - the edges of the pattern" beloved by reenactors are rarely seen on caps. But they are!The fabric is a copy of the German tent fabric (Zeltbahn) and corresponds to..
30.00 €
Helmet cover in camouflage "Planetree #3", for Waffen-SS troops. Double-sided, invertible: green shades for summer and brown shades for autumn. It has loops for attaching branches and grass for camouflage. It is attached to the helmet with three metal hooks and a special pocket for the visor. Only size 2 (there are no others and are not expected). Suitable for helmets 64 and 66 (head 56...59), in the photo he is wearing a helmet 66. You can pull on a helmet 68...
20.00 €
A good and not expensive copy of the M40 smock. There is no elastic and a wind valve on chest (they disappeared with the 1938 model). There are 2 slots with valves on the chest to access the tunic's pockets. In fact, they are not useful, and some soldiers sewed them up on their own. When worn, it was customary to stick cuffs of sleeves and sometimes the bottom of the blouse under the elastic and inside the blouse.The blouse is fully reversible, bilateral (on the side are green shades for summer and on the other side are brown shades for autumn). Colouring (camouflage scheme): Plane plane No. 3 (the original name is Platanenmuster 3). It camouflages well thanks to contrasting spots, similar to the shadow of tree foliage. It is a “classic” camouflage scheme of the SS troops, it was used thro..
99.00 €
A good and not expensive copy of the M42 smock. There is no elastic on the neck (it disappeared with the 1938 model). Lacing on the chest of the late type: it differs from the early only in arrangement; requires less fabric and time when stitching, however, a minor drawback is a strip of fabric in the wrong color, which is visible from the front side. There are also 2 pockets with flaps and button. There are no slots on the chest (as on the previous model). The smock is longer than its counterpart of the first model.The smock is fully reversible, bilateral (on the one hand are green shades of spots for summer and on the other hand are brown shades of spots for autumn). Coloring (camouflage scheme): Plane plane No. 3 (the original name is Platanenmuster 3).Material of the correct thick..
99.00 €
Plates to the bayonet of the Mauser 98k carbine (pads on the handle). Made of bakelite plastic. The price per set (right and left part for 1 bayonet).Plates bear no brand stamps.The parts are specially made larger than standard places so that they can be worked with a file for their site. Beware of bad copies, which are usually smaller than the original and mouted with gaps...
6.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Porcelain plate — a replica of a memorial plate from the first half of the ХХ century. Such dishes were made in memory of service, military campaigns, for various military and political organizations in Germany. Such porcelain is called propaganda-..
17.00 €
Steel plate for German bayonet Mauser 1898 (for handle). Made of steel, blued and coated with oil for storage...
11.34 €
Porcelain plate — a replica of a memorial plate from the late 1920s and early 1930s. Such dishes were made in memory of service, military campaigns, for various military and political organizations. Such porcelain is called propaganda-dishes; it is collectible and, of course, for domestic use. Copies are suitable for designing expositions, filming, creating an atmosphere in reconstruction and, of course, a great gift!The plate weighs about 300 g, has a diameter of 20 cm. The inscriptions are applied as hot decals (paint is baked into the surface at high temperature), imitating brush painting, this is not a cheap stencil. The inscriptions are fixed securely and can be washed in a dishwasher.The inscription on the plate: "only a highly disciplined army decides success in battle".NK..
17.00 €
This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Porcelain plate — a replica of a commemorative plate of the Association of German girls (German: BDM - Bund Deutscher Mädel). In the center of the plate are dancing girls around a staff with a swastika (the image has been corrected in accordance with th..
15.00 €
Price for 1 mirror. Only the Franz Blume advertising mirror is for sale, the other mirrors in the photo are examples of what mirrors with other advertising might look like and for color comparison. You can also buy these mirrors in our online shop.The copy of a pocket mirror from the first half of the 20th century. The reverse side shows an advertisement for uniform tailor Franz Blume from Landshut, Bavaria. Diameter 56 mm.Pocket mirrors with advertisements of various brands were very common in the 20-30s of the XX century. This small detail will perfectly complement the image of a military historical reenactor and help create a unique atmosphere of the Second World War...
9.00 €
Price for 1 mirror. Only the Hückel advertising mirror is for sale, the other mirrors in the photo are examples of what mirrors with other advertising might look like and for color comparison. You can also buy these mirrors in our online shop.The copy of a pocket mirror from the first half of the 20th century. The reverse side shows gentlemen wearing Hückel hats, an advertisement for Paul Klüver's hat shop in Berlin. Diameter 56 mm.Pocket mirrors with advertisements of various brands were very common in the 20-30s of the XX century. This small detail will perfectly complement the image of a military historical reenactor and help create a unique atmosphere of the Second World War...
9.00 €
A copy of a pocket mirror in the form in which it was sold at the barracks of the German army for German soldiers. Rectangular mirror 5x7 cm with the inscription "Vorsicht bei Gesprächen. Feind hört mit!" (Be careful when talking! The enemy is overhearing!). Mirror in a cardboard cover-envelope, which saves from dirt and scratches. On the package is printed "Ein kleiner Dank des Führers an seine Soldaten" (Little thanks of the Führer to his soldiers), as well as a national emblem — a pressed outeagle with a swastika...
8.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose!This copy is an independent new development made specifically for the Replika store, it is not a reprint from copies. Based on the original samples, we have developed a computer model. The thickness of the frame, the dimensions and the slopes of the parts are carefully checked. The decals have the right proportions and perfect symmetry. The decals were printed on professional equipment, the print conveys the smal..
4.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.This copy is an independent new development made specifically for the Replika store, it is not a reprint from copies. Based on the original samples, we have developed a computer model. The thickness of the frame, the dimensions and the slopes of the parts are carefully checked. The decals have the right proportions and perfect symmetry. T..
3.50 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Attention! Buckles can be without maker's stamps. The manufacturer changes stamps on the buckles from batch to batch. The absence of stamps is not a reason for discount or flaw! If you need a buckle with stamps, mention it in the order, w..
59.00 €
Original dark blue cotton fabric with white polka dots. Natural, dense, perfectly protects from the wind, pleasant to the skin.It is made in the form of a triangle 130 × 85 × 85 cm. Such scarves were worn by soldiers of the Wehrmacht and the SS. The scarf prevents dust from getting under clothes, prevents irritation of the skin on the neck and absorbs sweat well...
18.00 €
Pouch made of coarse tarp with belt loops (2 tarpaulin loops). It is fastened with a pair of leather loops on wooden bosses. No stamps.The color of the leather, straps, tarpaulin may slightly differ from that shown in the photo. This is not a defect and was completely not taken into account in the Red Army. We can take a photo of exactly your product upon your request.Price for 1 pc...
30.00 €
Pouch made of coarse tarp with belt loops (2 tarpaulin loops). It is fastened with a pair of braid loops on wooden bosses. Manufacturer's mark on the inside.The color of the straps and tarpaulin may differ slightly from that shown in the photo. This is not a defect and was completely not taken into account in the Red Army. We can take a photo of exactly your product upon your request.Price for 1 pc...
24.00 €
Pouch of coarse tarpaulin with loops for the waist belt and with a rectangular ring for wearing with soldiers' shoulder straps. Lid with leather strap on steel buckle.Color of a skin, straps, tarpaulin can differ from those on a picture. This is not a defect and was completely ignored in the Red Army. We can take a photo of your item from the warehouse before the order.PPSh drum magazine in the photo is shown for demonstration only, the drum is not for sale...
20.00 €
A pouch made of coarse tarpaulin with long loops for the waist belt. Lid with leather strap on steel buckle.PPSh drum magazine in the photo is shown for demonstration only, the drum is not for sale...
20.00 €
Black background for SS or any German tank-crew (Heer or SS).Circle with a star — for Oberschütze (senior shooter).Angle on a triangle patch — for Gefreiter (private 1st class).Double-angle on the triangle — for Obergefreiter (like senior lance-corporal)...
8.00 €
Circle with a star — for Oberschütze (senior shooter).Angle on a triangle patch — for Gefreiter (private 1st class).Double-angle on the triangle — for Obergefreiter (like senior lance-corporal)...
8.00 €
Circle with a star — for Oberschütze (senior shooter).Angle on a triangle patch — for Gefreiter (private 1st class).Double-angle on the triangle — for Obergefreiter (like senior lance-corporal).Usually sewn on the left sleeve at the level of the breast pocket, in the middle. If you shift the patch slightly forward, it will be better visible...
8.00 €
Push-button for Mauser 98 rifle or carabine bayonet "Czech (for Czech made ones). If it's impossible to screw an original button out because of rust and it is to be bored out and changed.Very high quality. Small "S" stamp. Price for set for 1 bayonet (2 parts of button and the spring)...
20.00 €
Push-button for Mauser 98 rifle or carabine bayonet. If it's impossible to screw an original button out because of rust and it is to be bored out and changed.Very high quality. Small "S" stamp. Price for set for 1 bayonet (2 parts of button and the spring)...
20.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Attention! Buckles bear maker's stamps, but the manufacturer changes them from batch to batch. The absence of stamps is not a reason for discount or flaw! If you need a buckle with stamps, mention it in the order, we will choose the stamp..
49.00 €
A ramrod for a carbine 98k. To complement the museum weapon, the blank or dummy weapons. Copy. Material steel, black burnished. Modern production.Length 314 mm without thread...
15.12 €
Central ring for the infantry Y-strap. Inner diameter 35 mm, outer 45 mm. Wire diameter is 5 mm. One Y-strap needs 1 ring. Price is for 1 pc.We offer rings made of aluminum and steel. The rings are not painted. The original steel rings were painted, as a rule, with light gray paint. Original aluminum fittings have never been painted.On aluminum, the seam is welded, processed with a file. Steel ring has brass brazed seam. Price is for 1 ring. You can put the ring metal option in the shopping-cart if it's in stock. If some option is not available, then it is not currently sold out. Perhaps it will appear later...
4.00 €
The rear hookfor the German Luftwaffe Y-belt. The same were used on cavalry and infantry "officer" Y-straps. This hook is longer than the front hooks. Original detail! Price for 1 pc. The material is aluminum, manufacturer's stamp may present (some have no stamps). If you are interested in any specific manufacturer stamps, write to us, we'll see which ones are left in stock.The shapes of the hooks had a lot of small differences, which depended both on the manufacturer and on the time of production. Minor corrosion may be present (seen in the photo), there are no holes, pits...
30.00 €
Rear hook for German Y-strap WW2, a replacement part for Wehrmacht and SS leather equipment. Made of aluminum, no stamps, rivet and washer included.Copy. The set includes hook, rivet. Without markings. Not painted.We offer hooks made of aluminum and steel. The option that is in stock can be selected and put in the basket. If some option is not there, then it is not available at the moment. Perhaps it will appear later...
6.50 €