Misc., parts

The product will be ready for shipping from 1 to 3 weeks after payment, after which all the goods you ordered will be sent to your address in one parcel. It is better to order ready-made goods from the warehouse separately, then we will send them immediately.Order more stamps in one order to get a discount!This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need ..

52.00 €

An accurate and high-quality copy of the accessories for 1 piece of the Mauser pouch. Cheap copies of pouches often have good leather and threads, but very simplified accessories that need to be replaced. For example, pegs with a thread, not welded D-ring and so on.The set includes 3 pegs with washers, 1 D-ring and rivets with washers of different shapes. The material is aluminum (for pouches manufactured before 1940 inclusive). There were two types of pegs for such pouches: for the central section (rounded tip, "pear" — 1 piece in a set) and for the side sections (sharp tip, "mushroom" — 2 pieces in a set).For riveting during installation, a special stop may be needed so that the peg or rivet does not move on impact, and the tip comes out in a beautiful spherical shape. You can install th..

15.00 €

Thin woolen cloth smooth fabric for all kind of insignia (collar tabs, shoulder boards), manufacture of clothes elements (tops of the Red Army peaked caps), edging and piping (i. e. trouser stripes) etc. We offer the most popular colors, we don't have other colours.• Red is the color of the artillery of the German and Soviet armies, but is widespread in other armies of the world.• Black - material for collar-tabs, shoulder straps and patches of the SS. It is possible to use it for German tank crew uniforms and headgear manufacture.• Blue is suitable for German medics or NKVD USSR caps/trousers.• Crimson - the infantry colour in the Red Army.• Yellow - Luftwaffe collar tabs colour.Price is for piece 10x10 cm (square decimeter or sq.dm) — you can see it in the picture.We can cut a ..

0.40 €

Red silicone rubber 3 mm thick. Not afraid of deformation, heating, solvents. From this material, you can cut out the gasket of the shape that you need: on a canister, water tank, food thermos, etc.The price for a piece is 5x5 cm. Only one piece 5x20 cm left (4 units of the item).We cut any pieces (write the size in the comments to the order). The price for a piece of your size is obtained from the number of pieces of 5x5 cm that fit in this size. For example, a piece of 10x15 cm is 6 times 5x5 cm, that is, 6 units. If you are not sure that you calculated correctly, contact us in any way, we will help!How to work with rubber? In order to cut the gasket, you can use a sharp knife, scissors (with scissors the result will be rougher) or a specially made cutting (metal cutter in the shape..

1.50 €

Price for 1 meter (≈39⅓ inches).Linen thread for leather. Width ≈1.3 mm.The thread is not waxed, it has yellow-gray colour of natural linen. You can wax it by yourself usung a candle or special wax bar. You can colourate it to yellow "old" colour using thin paint. The thread is new (not stale), but it's less strong than modern synthetic threads. You should take account of it when you tighten loops...

0.25 €

Price for 1 meter (≈39⅓ inches).Cotton thread for leather. Width 0.8 and 1.3 mm (you should choose before buying). Thread 0.8 mm is nice for small items e. g. helmet chin-strap, and thread 1.3 is for large iterms like waist belt or Y-strap.The thread is not waxed. You can wax it by yourself usung a candle or special wax bar. You can colourate it to yellow "old" colour using thin paint. The thread is new (not stale), but it's less strong than modern synthetic threads. You should take account of it when you tighten loops...

0.19 €

The golden cord was worn on generals' peaked caps of the Heer, the SS and the Luftwaffe (and other branches). The officers had silver cords.The cord is made of metal thread, it feels cold. Very good copy.Buttons (pins) are not included! Buttons are sold separately...

15.00 €

There is no size stamp on the rim on sizes 55, 56 (only an ink stamp on the leather). The brand of the manufacturer is on all the liners.A copy of the German liner. The sizes are accurate and the materials are carefully selected. Aluminum bands, 1.5 mm leather, beige or brown felt. On the sides of the band are size stamps (for example, 58/66 n. A., where 58 is the size of the head, and 66 is the size of the helmet). Size stamp is embossed on the inner rim also. The inner rim of the steel spring (Balaclava transition period of 1940, when often used parts made of aluminum and steel in the same product)! There is also the name of the manufacturer on the band (BERL. KOFFERFABRIK MAX DENSOW, a suitcase factory in Berlin is not the most popular, but one of the first manufacturers of these l..

50.00 €

The price is for 25 meters of braid.Braid (or galloon, soutache) — an exact copy. Braid is a little shiny, as it should be. Braid doesn't contain metal thread. However, no modern copy on this price level contains metal thread. Metal thread mass production ceased in the second half of the XX century due to the enormous cost compared to non-metallic ones. Comparison of our braid with the original (photo by Liau Wesley): ..

28.35 €

Price for 10 cm (1 decimeter).Braid (edging, galloon, soutache) is a good copy. The edging is slightly shiny, as it should be. It is made of metallic thread and feels cold to the touch. It is not a cheap copy of lurex (synthetic plastic threads).We offer 2 colors: silver (officers) and gold (generals). You must select an option (color) before putting it in the basket. If a color is not available for selection, then it has already been sold.How to sew on?The edging should be inserted between the parts of the cap and then sewn together. For different headdresses, the edging is sewn in different places. On visor-cap around the bottom, on side-cap around the bottom and in front part of the lapel. See photos of originals in available sources. You can measure how much edging you need with a piec..

0.30 €

The flap is made of surface-dyed black leather with two aluminum fasteners...

10.00 €

A rope for setting up a German cape-tent or Zeltbahn (literally means “tent linen” from the German, but better “part of the tent”, because the German cape-tent was a ¼ of pyramidal tent for 4 people).See the tab "Historical reference" on the history of this garment and its variants.The tent rope is made specially for our shop from a 4 mm thick cord with antibacterial impregnation. There are woven loops at the ends (the "cable twist", when the end of a rope is woven into itself and is held stronger than a regular knot due to numerous friction surfaces). Length of the rope is about 2 meters. The rope is ready for use...

3.00 €

Jute rope 4 mm thick, twisted, impregnated against bacteria and rotting. Such a rope was used to set up tents, shelter quarters and secure cargo in almost all armies of the world during the Second World War...

0.80 €

Loops for grommets (metal holes) of the German cape-tent or Zeltbahn. Usually every Zeltbahn had these loops to make its installation easier.The loop is a piece of rope of the desired length and a knot at the end. Thread it into the hole in the Zeltbahn and tie another knot. Made specially for our shop from a 4 mm thick cord with antibacterial impregnation.Price for 1 loop, you need 3 for your Zeltbahn. No Zeltbahn included...

0.60 €

Loops for stakes of the German cape-tent or Zeltbahn (for samples that have a hole for the rope). Stakes always had rope loops and were included with the cape-tent set.See the tab "Historical reference" on the history of this item and its variants.The loop is a piece of rope of the desired length. Thread it into the hole in the peg and tie it in a knot. Made specially for our shop from a 4 mm thick cord with antibacterial impregnation.Price for one loop for 1 stake. No stakes included...

0.40 €

Original stakes for the German cape-tent or Zeltbahn. Original, restored, suitable for WW2 reenactment. See the tab "Historical reference" on the history of this item and its variants.The tent set usually included 2 stakes, 1 part of the pole and a rope. Price for one stake.We offer the following peg options:S&C (1939 aluminum peg);herringbone (steel peg S&C with herringbone logo from 1940, the brand is hard to see under a layer of paint);GA (1940 aluminum peg). Select the peg next to the Add to cart button. If an option is not there, then it is already sold out and not available for order...

10.00 €

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.We offer quality decals made specially for our shop. Sketches are developed on the basis of original inscriptions on German grenades. The drawings have the correct proportions and perfect symmetry. Decals are printed on professional equipment.The decals..

0.75 €

We offer quality decals made specially for our shop. Sketches are developed on the basis of original inscriptions on German grenades. The drawings have the correct proportions and perfect symmetry. Decals are printed on professional equipment.Decals for offensive grenades M24 — the inscription VOR GEBRAUCH SPRENGKAPSEL EINSETZEN (insert detonator before use) in two different fonts (options 1 and 2, respectively, you need to choose before purchase).Eagle WaA is offered as a separate item, it is not included in a decal set for the M24 grenade!How to install the decal? Put a piece of paper with the image (as it is, do not cut anything) in warm water for 30-60 seconds. If there are advertising elements on the decal (logo or frame), they are easily removed (with fingers) when the subs..

3.00 €

We offer quality decals made specially for our shop. Sketches are developed on the basis of original inscriptions on German grenades. The drawings have the correct proportions and perfect symmetry. Decals are printed on professional equipment.Decal for smoke grenade M24/39 — the inscription Nb.H.Gr.39 (smoke hand grenade 39) with a white stripe on the body and the manufacturer's marking.Eagle WaA is offered as a separate item, it is not included in a decal set for the M24 grenade!How to install the decal? Put a piece of paper with the image (as it is, do not cut anything) in warm water for 30-60 seconds. If there are advertising elements on the decal (logo or frame), they are easily removed (with fingers) when the substrate is wet. After that, the decal must be put on the surface..

4.50 €

Standard aluminum rivet for German equipment (suspensions for bayonets, puches for a machine gun, ammo pouches for a carbine, etc.). A set of a rivet and a washer. Price for 1 pc.An example of using such rivets (a copy of the 98k carbine pouch, rear view).How to install the rivet?To do this, you will need an anvil with a recess in the form of a hemisphere. Ideally, there should be two: for both sides of the rivet, so that the finished hat is not flattened from the blows on a flat anvil. The rivet is cut approximately to the height of the future hat (if the height of the hat is 2 mm, then it can be cut by 2-3 mm, this will become clear during the trial installation and depends on the rivet material). Insert the rivet into a ready aperture, lean a hat on the supporting anvil for support..

0.40 €

Aluminum ID disk (dog-tag) of German soldier of World War II — Erkennungsmarke. Quality copy. Size 5x7 cm.We don't write on dog-tags...

6.00 €

Steel ID disk (dog-tag) of German soldier of World War II — Erkennungsmarke. High quality copy. Size 5x7 cm.We don't write on dog-tags...

3.50 €

Steel ID disk (dog-tag) of German soldier of World War II — Erkennungsmarke. High quality copy. Galvanizing does not crumble and does not peel off after stuffing. Size 5x7 cm.We don't write on dog-tags...

4.50 €

Our wire net copies original samples and is suitable for reenactment. It fits any helmet. To install it, you need to bend all hooks over the rim of the helmet, and then pull and twist the central wire with pliers, shaping the net. Paint can get scratched, yes. The original helmets were also scratched under the wire net.The net is made of baked (soft) wire 1.5 millimeters thick.The helmet is shown for the illustration of the installed wire net, the helmet is not included in the price of the net. We do not install nets, we only sell nets...

25.00 €

The product will be ready for shipping from 1 to 2 weeks after payment, after which all the goods you ordered will be sent to your address in one parcel. It is better to order ready-made goods from the warehouse separately, then we will send them immediately.Order more A3 and A4 metal posters in one order to get a discount!This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the..

40.00 €

The product will be ready for shipping from 1 to 2 weeks after payment, after which all the goods you ordered will be sent to your address in one parcel. It is better to order ready-made goods from the warehouse separately, then we will send them immediately.Order more A3 and A4 metal posters in one order to get a discount!This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The c..

27.00 €

The product will be ready for shipping from 1 to 2 weeks after payment, after which all the goods you ordered will be sent to your address in one parcel. It is better to order ready-made goods from the warehouse separately, then we will send them immediately.Order more A3 and A4 metal posters in one order to get a discount!This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The c..

26.00 €

Wooden handle for dummy-grenade restoration. Made on a machine-tool from a whole piece of beech. This wooden part is for German smoke grenade M24-type or smoke grenade 39 (Nebelhandgranate 39). This handle has ribs on lower end to differ it by touch from a fighting grenade in darkness...

5.00 €

Wooden handle for dummy-grenade restoration. Made on a machine-tool from a whole piece of beech. This wooden part is for German offensive grenade M24 (Stielhandgranate 24)...

5.00 €

Wooden handles for grenades. Made on a machine-tool from a whole piece of beech. We have (not always):• Ball-end stick. Has a bore inside and apperture for a cord in the end. Total lenght is about 25 cm.• Cap-end stick. Has a bore inside. Total lenght 25.5 cm, lenght of wooden part after installation 22.5 cm.You can choose a handle for purchasing if only it's in stock now...

4.91 €

Wooden handle for making dummy grenades (for demonstration purposes and reenactment games). Model for the Finnish grenade Varsikranaatti M32 / M41. Cut on the machine tool from a single piece of birch. The total length is 20.3 cm, the length of the visible part (after installation) is 17 cm...

7.00 €

Wooden shaft, handle for German WW2 sapper ax. This wood can be also used for other models of axes. It has a convenient tip shape. Made on a machine-tool from a whole piece of beech. Length 36,5 сm.Price for a wooden haft only...

10.00 €

Wooden shaft, handle for German WW2 straight spade. This wood can be used for the most majority of European entrenching tools of the XX century. The shank made on a machine-tool from a whole piece of beech. Lenght 40 сm.Price for a wooden haft. Other items in the photo are for illustration only...

5.00 €

Wooden shaft, handle for German WW2 foldable spade. This wood can be also used for other models of sapper shovels; it has a convenient tip shape. Made on a machine-tool from a whole piece of beech. Lenght 42 сm.Price for a wooden haft. Other items in the photo are for illustration only...

5.00 €

Wooden shaft, handle for Soviet and Russian straight spade (pre-WW2 with "lips"). This wood can be used for the most majority of European entrenching tools of the XX century, also for WW1. The shank made on a machine-tool from a whole piece of beech. Lenght 34 сm.Price for a wooden haft. Other items in the photo are for illustration only...

4.00 €

Wooden shaft, handle for Soviet Army straight spade (pre-WW2 with "lips"). This wood still used for Russian entrenching shovels and until now. The shank made on a machine-tool from a whole piece of beech. Lenght 42 сm.The shovel in the photos is for illustration. A shovel is not for sale, this item is only the haft...

3.53 €

Red rubber gasket for the lid of the German field bottle. Made in an industrial way, absolutely smooth edges.There were often red (pink, orange) gaskets in the field bottles of the first half of the XX century. The red gasket is a must-have part for a German field bottle. Unfortunately, original rubber parts are already dried and stiffened. Our gasket is new and elastic, looks like original, it will perfectly replace the old rubber for use in reenactment or collection.Price for 1 gasket, cover for flask not included...

1.26 €

The lid/cap on the German flask model 1931 (and the like) aluminum.Gorgeous copy, which is difficult to distinguish from the original, especially if stamped. The lid is without stamps. The lid is completed with a rubber gasket. The peg is not installed in the lid, but attached to it. It needs to be riveted after installing the cap on the flask strap.Price per set: cover + red rubber gasket + peg (rivet). How to install the peg in the cover?The pegs were installed into the bakelite caps with 1 mm margin, and were fixed by a blow. From the blow, the peg expanded and fixed itself. At home, you can fix the peg with epoxy resin (epoxy glue) — this is reliable, safe method and it will give 100% tightness to the cap.Caps from our "Replika" shop, pegs are inserted but not fastened. All peg..

12.00 €

The lid for the German flask model 1931 of black synthetic resin (copy).The appearance of resin lids was obviously connected with the reform of 1940, when a number of simplifications were made in the uniform and equipment of the German army. Such caps have been installed 1940-1941 (some 1942) by flask manufacturers marked MN (Metallindustrie GmbH. Neunkirchen-Saar (MENESA)), W.A.L. (Westfalische Aluminum Industrie, Junger & Co., Lüdenscheid), H.R.E., M.K.L., S.S.L., ESB and other. Such caps are very often found with in veneer (they are also not quite rightly called "bakelite"), which were used by the German African Corps (DAK).The cap has the same design as the earlier aluminum caps. In 1940, the Germans essentially made a copy of the aluminum cover from a cheaper material.Price p..

8.82 €

The lid for the German flask model 1931 of black synthetic resin (copy).The appearance of resin lids was obviously connected with the reform of 1940, when a number of simplifications were made in the uniform and equipment of the German army. And this model has been dating since 1942. Probably, the Germans changed the design to a simpler (in terms of manufacturing) and more comfortable (with large ribs).Price per set: cap, red rubber gasket (type with a hole in the middle) and peg (rivet).How to install the peg in the cover?The pegs were installed nip and tuck into the bakelite caps, and were fixed by a blow to the center of the peg (with a pointed metal “finger” like a nail). From the blow, the peg expanded and fixed itself. It should be understood that the impact force was calcu..

8.82 €

The peg with a long tip (the part that is inserted into the cover) is intended for bakelite caps. These have thicker top than aluminum caps. In any case, measure the thickness of the top side of your cap before buying the peg.Material — aluminum. The length of the tip is 4 mm, the diameter of the tip is 4 mm, the total length is 13 mm, the diameter of the middle part (on which the strap is put on) is 5 mm.Price for 1 peg.How to install the peg in the cover?The pegs were installed into the bakelite caps with 1 mm margin, and were fixed by a blow. From the blow, the peg expanded and fixed itself. At home, you can fix the peg with epoxy resin (epoxy glue) — this is reliable, safe method and it will give 100% tightness to the cap.Caps from our "Replika" shop, pegs are inserted but no..

3.00 €

The peg with a long tip (the part that is inserted into the cover) is intended for bakelite caps. These have thicker top than aluminum caps. In any case, measure the thickness of the top side of your cap before buying the peg.Material — aluminum. The length of the tip is 8 mm, the diameter of the tip is 4 mm, the total length is 17 mm, the diameter of the middle part (on which the strap is put on) is 5 mm.Price for 1 peg.How to install the peg in the cover?The pegs were installed nip and tuck into the bakelite caps, and were fixed by a blow to the center of the peg (with a pointed metal “finger” like a nail). From the blow, the peg expanded and fixed itself. It should be understood that the impact force was calculated and tested in advance before the production of caps. But when you w..

3.00 €

Precise and high-quality replica of stud for woolen cover of German field bottle (M31 canteen). The set includes a peg and a washer. You may need a special support for the stud during riveting, otherwise you may bend the stud.We offer a peg and washer made of different materials:- aluminum, with an aluminum washer (these were produced before 1940),- steel, with a steel washer (after 1940).Before ordering, you need to select the option (material). If an option is not available for selection, it means that it has already been sold...

3.50 €

Replica of 12 mm press-buttons for German equipment of the first half of XX century. Nice deep "star" design on exterior part, made of golden metal like originals, exterior detail painted black. Interior part has inconspicuous star marking (***), no modern inscriptions like "super star", "strong" or "xiao myao"!We sell press-buttons per 1 piece. Each piece consist of 4 parts. Press-buttons are usually installed by a standart hand-device (or you can bring them to a local workshop). You can install them by yourself using a nail and a hammer but you should know how to  install press-buttons in theory and try usual cheaper press-buttons first.The color of the press-buttons is brass (golden). German buttons until 1940 were made of brass and glittered like new cartridges. Over time, th..

2.00 €

Cast aluminum hook for German field-bottles 1931-1940 (later they used steel hooks). It is a copy (cast) of the oLc model. The metal is softer than the original ones, but it holds the flask well...

8.00 €

We often come across a request to make not the cover that we have, but a slightly different one. We cannot make products to order, because we make them in large batches in order to reduce the unit price. But we can give you the opportunity to make the kind of cover you want.Felt of brown color, dense, flexible, thickness of 2 mm. A piece of 21×56 cm is enough for 1 case for any field bottle (even for a Jaeger field bottle, which has many additional details).Composition: 90% sheep wool, 10% other inclusions. This felt is not very homogeneous, it is more similar to the felt used in the second half of the war. At the beginning of the war, the felt was made of very fine wool and was literally a hat felt.How to work with felt?The felt part does not need to be wetted, it becomes smaller in width..

7.00 €

The hook is coated semi-gloss grey paint, as was common for German steel strap parts...

6.00 €

Hook for hanging a German medical field bottle with a volume of 1 or 1.5 liters. Sometimes it was used as a rear hook of an infantry Y-belt, but it is not canonical to use it this way.A spare part for repairing or sewing leather equipment. Original (made in Germany in the 1940s), aluminum material.Rivets can be riveted on the hook or missing. We recommend that you also buy suitable rivets with a rod diameter of 4 mm and a length of at least 5 mm.We also sell buckles, pegs, a lid and everything else so that you can assemble a set of such straps.Price for 1 hook...

10.00 €

Attention! The spring is already bent at 45 degrees so that it can be easily inserted into the hook. This eliminates the risk of spring breakage during installation.Spring steel 0.2 mm thick and 7 mm wide for repairing original hooks to German flasks. The part is cut on the machine.There are two ways to insert the spring. The easiest way is to gently squeeze the spring and insert it from behind (from the side of the hook ring). Or you can disassemble the hook and reassemble it with the spring...

1.50 €

A buckle for the field bottle strap, gaiters (Gamaschen) and other equipment. Not painted. The size of the inner rectangle (opening) is 16,5×11 mm, designed for a 15 mm strap. The outside size is 23×18 mm. Such buckles were produced in the Third Reich of different sizes for different equipment.We offer buckles made of aluminum...

3.00 €

The original buckle for equipment made of a sling. Dimensions 26×31 mm, opening width 19 mm (for the band 18 mm). Before installation on the equipment, it was usually painted with light gray enamel.It is suitable for tropical or late-war outings (straps for rolling up a Zeltbahn, for the mess-tin), for backpacks and bags. It is not suitable for the field bottle strap (another smaller buckle was used there, it is almost impossible to find it separately).Price for 1 pc...

6.00 €

Price for 10 cm, can be cut to any length. 1 meter = 10 items. For a "coconut" field bottle you need 16 units of this item (160 cm).Wholesale price from 24 m (240 units).Cotton strap for sand-colored equipment, 16 mm wide (the Germans used 16 mm and 18 mm for different types of equipment). Unique and rare item, not sold anywhere else. In different countries you can get different options, but most often they are wider and dark olive in color.The strap is dense, 1.5 mm thick.This strap can be used to make copies and repair a wide range of equipment, for example:German field bottle "coconut" and tropical flasks in a case. As you can see in the photo, straps of various widths were used.Photo from fjm44.com. More photos on the site fjm44.com.Pouches of different types, for e..

0.35 €

The items in the photo (finished straps and metal parts) are shown to show the real shades and the size of the strap. We offer only a cut of the strap of the chosen length.Price for 10 cm, can be cut to any length. 1 meter = 10 items. Discounts for wholesale from 24 m.Cotton strap for sand-colored equipment, 18 mm wide (the Germans also used 16 mm and 20 mm). Unique and rare item, not sold anywhere else. In different countries you can get different options, but most often they are wider and dark olive in color.This strap can be used in German equipment: for late straps for equipment, for field bottles, for hanging bayonet-knives and fasteners for other equipment. In Soviet equipment - for chin straps for helmets SH-39, SH-40, for straps for steel bibs and also as f..

0.30 €

Pin for the German equipment. It was used as the main fastener in the carrier of the foldable shovel, magazine-pouches to the MP-38/40 submachine gun, at the pouch to the muzzle mortar, pouch to the MG machine gun and many other equipment parts. The "pear" shape is ideal for multiple buttoning and unbuttoning. The height of the leg is 4 mm, the dimensions without the leg (that is, the size of the peg installed on the product) is approximately 8×8×8 mm.We sell pegs and washers made of aluminum and steel. The material can be selected from the list near the "Add to cart" button. If the desired material is not in the list, then such pegs are over. You can write to us and we will start production.The kit includes a washer. Price for 1 piece (pin + washer)...

3.50 €

Pin (peg, lug) to the German equipment strap (Zelt strap, Packungriemen), made of aluminum. The shape is "mushroom", the cap is convex on top, flat on the bottom. It was also used on hanger "frog" for bayonet. The height of the leg is 4 mm, the dimensions without the leg (that is, the size of the peg installed on the product) is approximately 8×8×8 mm.The kit includes an aluminum washer.Price for 1 piece (pin + washer)...

3.50 €

Pin (peg, lug) to the German hanger "frog" for bayonet and other equipment. The shape of the head is rounded, flattened. Facilitates opening, designed for many cycles of button-unbutton. The height of the leg is 4 mm, the dimensions without the leg (that is, the size of the peg installed on the product) is approximately 8×8×8 mm.We sell pegs and washers made of aluminum and steel. The material can be selected from the list near the "Add to cart" button. If the desired material is not in the list, then such pegs are over. You can write to us and we will start production.The kit includes a washer. Price for 1 piece (pin + washer)...

3.50 €

Accurate and high-quality copy of a peg for a German pouch. Aluminum material (for pouches produced before 1940 inclusive). Includes a peg and washer, the price is for 1 peg with a washer (not for a set for the entire pouch).For riveting during installation, you may need a special stop so that the peg does not move upon impact.There were two types of pegs for such pouches: for the central section (rounded tip, "pear" - in the right photo) and for the side sections (sharp tip, "mushroom" - in the left photo).  Before ordering, you need to select an option (peg type). If an option is not available for selection, then it has already been sold.Please note that we also sell rivets for these pouches (see Featured Products below)...

3.50 €

Original aluminum part. It was used on the belts of German satchels to secure removable shoulder straps. Rare item, not currently in production (because it is quite rare). Parts dug, may have small oxidized areas. General condition 4-5 points out of 5.Material aluminum.Price for 1 piece...

10.00 €

Original aluminum part. It was used on belts for German bread bags. Rare item, not currently in production (because it is quite rare). The part is dug, may have small oxidized areas. General condition 4-5 points out of 5.The clearance is 3 cm (designed for a strap up to 30 mm wide). External dimensions are 38×16 mm (sizes from different manufacturers may vary slightly).Price for 1 piece...

10.00 €

Original aluminum part. It was used on belts for German bread bags. Rare item, not currently in production (because it is quite rare). The part is dug, may have small oxidized areas. General condition 4-5 points out of 5.The clearance is 3 cm (designed for a strap up to 30 mm wide). External dimensions are 38×27 mm (sizes from different manufacturers may vary slightly).Price for 1 piece...

8.00 €

Long D-shaped ring for auxiliary strap of the German infantry Y-strap. One Y-strap needs 2 rings.We offer rings made of aluminum and steel. The rings are bent from a wire with a diameter of 4 mm. The rings are not painted.On aluminum, the seam is welded, polished. Steel ring has brass brazed seam. Price is for 1 ring (even if they are normally pair). You can buy 1 or more. You can put the ring metal option in the shopping-cart if it's in stock. If some option is not available, then it is not currently sold out. Perhaps it will appear later...

4.00 €

Original aluminum buckle. It was used on the straps of German satchels (backpacks) and later on Y-strap. The buckles are dug out, may have small oxidized areas. General condition 4 or 5 points out of 5.Material aluminum.Price for 1 piece...

6.00 €

Screw with nut for German soldier's Y-strap. Made of aluminum. Price for 1 piece (not pair). You need 2 pieces for 1 Y-strap.We offer these screws made of aluminum or steel: for early and late (production after 1940) Y-straps, respectively. Usually all the parts in one product were made of same metal, but during the early 1940s there was a gradual transition to steel instead of aluminum, and a mixture of parts was encountered. The factories used stocks of what was left over from the 1930s along with new steel parts.The product material must be selected before ordering next to the "Add to cart" button. If some option is not there, then such screws are currently sold out.Price for 1 piece (not a pair). One Y-strap needs 2 screws.We also sell other accessories for the Y-straps. See related pr..

4.00 €

Rear D-shaped for main strap of the German infantry Y-strap. Also suitable for bread bags, almost the same used on pouches to the carbine (but there the weld was located on the arc). One Y-strap needs 2 rings. Price is for 1 pc.We offer rings made of aluminum and steel. The rings are bent from a wire with a diameter of 4 mm. The rings are not painted. The original steel rings were painted, as a rule, with light gray paint. Original aluminum fittings have never been painted.On aluminum, the seam is welded, polished. Steel ring has brass brazed seam. Price is for 1 ring (even if they are normally pair). You can buy 1 or more. You can put the ring metal option in the shopping-cart if it's in stock. If some option is not available, then it is not currently sold out. Pe..

3.00 €

The rear hookfor the German Luftwaffe Y-belt. The same were used on cavalry and infantry "officer" Y-straps. This hook is longer than the front hooks. Original detail! Price for 1 pc. The material is aluminum, manufacturer's stamp may present (some have no stamps). If you are interested in any specific manufacturer stamps, write to us, we'll see which ones are left in stock.The shapes of the hooks had a lot of small differences, which depended both on the manufacturer and on the time of production. Minor corrosion may be present (seen in the photo), there are no holes, pits...

30.00 €

Rear hook for German Y-strap WW2, a replacement part for Wehrmacht and SS leather equipment. Made of aluminum, no stamps, rivet and washer included.Copy. The set includes hook, rivet. Without markings. Not painted.We offer hooks made of aluminum and steel. The option that is in stock can be selected and put in the basket. If some option is not there, then it is not available at the moment. Perhaps it will appear later...

6.50 €

Hook for German infantry Y-strap. The material is steel, not painted (the original hooks were usually painted with light gray paint). On the inside with the manufacturer's mark JDEHA.The price is for 1 piece. You need 2 pieces for an Y-strap...

15.00 €

Hooks for German infantry Y-strap. Originals from a stock! Hooks are sorted in pairs (identical) and sold in pairs (price for 2 pcs.). Material steel, painted in matt gray. We have hooks from several manufacturers, they are the same in quality and condition. If this or another manufacturer stamp is important to you, write to us, we'll look what's rest in stock.Hooks had a lot of minor differences in shape, which depended on both the manufacturer and the time of production. For example, the early hooks had a rounded buckle; and later the shape of the buckle became closer to rectangular. The swinging hooks also varied: initially it had variable width (it was narrower at the bend, but wider at the straight sections) and a rather complex shape of the bends. Later, the hook shape became easier ..

65.00 €

Central ring for the infantry Y-strap. Inner diameter 35 mm, outer 45 mm. Wire diameter is 5 mm. One Y-strap needs 1 ring. Price is for 1 pc.We offer rings made of aluminum and steel. The rings are not painted. The original steel rings were painted, as a rule, with light gray paint. Original aluminum fittings have never been painted.On aluminum, the seam is welded, processed with a file. Steel ring has brass brazed seam. Price is for 1 ring. You can put the ring metal option in the shopping-cart if it's in stock. If some option is not available, then it is not currently sold out. Perhaps it will appear later...

4.00 €

Central ring for the officer (paratroop, cavalry) Y-strap. Inner diameter 27 mm, outer 35 mm. One Y-strap needs 1 ring.Ring is made of aluminum wire and welded, seam polished. Price is for 1 ring...

5.00 €

Pin (button, lug) for German soldier's Y-strap. For rear strap only (side straps had pins of less height). Leg height is 8 mm, total height 12 mm. Made of aluminum.The same pin was used in harness for German gasmask canister. You neen 2 pins for one set of straps.We offer these screws made of aluminum or steel: for early and late (production after 1940) Y-straps, respectively. Usually all the parts in one product were made of same metal, but during the early 1940s there was a gradual transition to steel instead of aluminum, and a mixture of parts was encountered. The factories used stocks of what was left over from the 1930s along with new steel parts.The product material must be selected before ordering next to the "Add to cart" button. If some option is not there, then such ones are curr..

3.00 €

Pin (button, lug) for German soldier's Y-strap. For side straps (the rear strap had a longer pin). Leg height is 6 mm, total height 10 mm.The same pin was used in harness for German gasmask canister. You neen 2 pins for one set of straps.We offer these screws made of aluminum or steel: for early and late (production after 1940) Y-straps, respectively. Usually all the parts in one product were made of same metal, but during the early 1940s there was a gradual transition to steel instead of aluminum, and a mixture of parts was encountered. The factories used stocks of what was left over from the 1930s along with new steel parts.The product material must be selected before ordering next to the "Add to cart" button. If some option is not there, then such ones are currently sold out.Price for 1..

3.00 €

Hook-carabiner for fastening straps of German mountain backpacks and Luftwaffe backpacks from below. Original part! Price for 1 pc. The material is aluminum, manufacturer's stamp may present (many have no stamps). If you are interested in any specific manufacturer stamps, write to us, we'll see which ones are left in stock.The shape of the hook might be different, which depended both on the manufacturer and on the time of production. All hooks have traces of repair, but restored to working condition, ready for use in reenactment...

35.00 €

Front hooks for a German mountain backpack. Clearance width 27 mm (for a 25 mm belt). Original item!There are paired hooks on one manufacturer's stamp (price per pair), there are hooks without a pair (price for 1 hook). The price is calculated automatically when you select an option next to the "Add to cart" button.Material is aluminum, various brands (pair hooks): D&C, WG, L&F, AG, SC, there are unpaired and without brands. If you are interested in any specific manufacturer's marks, write to us and we'll see which ones are left in stock.The shapes of the hooks had a lot of small differences, which depended both on the manufacturer and on the time of production. There may be traces of repair (visible in the photo), the hooks are ready for use on backpacks for their intended pu..

65.00 €

D-shaped center back ring for attaching the main shoulder straps of a German backpack. It was used with mountain (Jäger) backpacks, Luftwaffe backpacks, infantry backpacks of the end of the war, etc. The material is aluminum, the surface is sandblasted. It is made at the factory equipment in Germany, in the same place where such accessories were made during the Third Reich.Internal dimensions 47×38 mm, where 47 mm is the width of the straight part of the ring (the width of the strap). External dimensions are 65×50 mm, respectively. The wire thickness is 6 mm.The price is for 1 ring. 2 similar rings on a early mountain backpack (with alu parts). Original rings were more "roundy" and more "flat", used without any system. Source of the photo: wehrmacht-awards.com/forums/..

3.50 €

Ring-hook for a German infantry assault backpack (A-frame) or for various backpacks. Independent development, made in Russia. The material is aluminium. No manufacturer's stamps.The hook is painted hammer gray, which is better to sand off or wash before use, because aluminum parts of this type were not covered with paint, as a rule. You can wash the paint with "acetone" or "646" solvent or brake fluid (for a car). Acetone dissolves the paint instantly, and if you use brake fluid, the product must be soaked for several hours in it. The advantage of brake fluid over solvent is the absence of a sharp smell (although it still has a smell).Price for 1 pc. Usually you need 4 for an equpment item...

2.00 €

Ring-hook for a German infantry assault backpack (A-frame) or for various backpacks. Independent development, made in Russia. Material steel, painted in matt grey.Superb quality. Price for 1 pc. Usually you need 4 for an equipment item...

3.50 €

Hook hook for the German infantry assault backpack (A-frame) or for various backpacks. Steel, matt grey painted. Original warehouse storage. Price for 1 pc. Usually you need 4 for 1 equpment item...

13.50 €

Hook hook for the German infantry assault backpack (A-frame) or for various backpacks. The material is aluminum. Completely original, the condition is 4 or 5 out of 5 points.Price for 1 pc. Usually you need 4 for 1 equipment item...

15.00 €

Steel hook to the shoulder strap of a German breadbag 1931. Flat spring carabiner. Original, stock storage. It is covered with matte gray paint (Stumpfgrau), the standard for steel fittings of the German army...

5.00 €

A set of metal parts for the German bread bag model 1931: central hook with rivet, main and rear rings. Material: steel. Welded rings. All parts are covered with matte gray paint (Stumpfgrau), the standard for steel fittings of the German army...

15.00 €

Buckles of this type were used in the military uniforms of many countries, including the uniform of the Third Reich in the early XX century.The material is heavy metal (presumably steel) coated with black enamel. For the strap 2.5 cm wide.Price for 1 pc...

4.00 €

Original aluminum buckle for the field bottle strap, gaiters (Gamaschen) and other equipment. Not painted. The size is 27×21 mm, the width on the inside is 20-21 mm. Designed for straps with a width of 18-19 mm. Such buckles were produced in the Third Reich of different sizes for different equipment.We offer buckles made of aluminum...

3.50 €

Pebbled 12 mm shank button for German caps and other headgear, painted in dull-green (field gray, Feldgrau) colour. The button is assembled from three parts (front, rear and the leg). All parts are made of aluminium (white metal). Button bear no stamps.Price for 1 pc. You usually need 2 pcs. for 1 cap...

2.00 €

Original hooks to the German gas canister, made in Germany. We have 2 types:• steel with protective zinc coating;• aluminum.No stamps or markings on hooks. Hooks are unpainted...

3.00 €

..

2.00 €

Pebbled 12 mm shank button for German caps and other headgear, painted in black colour. The button is assembled from three parts (front of aluminum, rear and the leg of brass/copper). Button bears no stamps.Price for 1 pc. You usually need 2 pcs. for 1 cap...

2.00 €

Hooks for German soldier waist belts. High-quality copies, we install the same hooks on belts of our own production. Pay attention to the quality stiffening ribs on our hooks. Stiffeners were present on all early hooks until the late model appeared (there were no stiffeners on it).But in the modern copy market, unfortunately, early hooks without stiffening ribs are widespread. These are useless and simplified fakes! To get those stiffening ribs, you need serious pressing and stamping equipment, which is not available to artisans. And they save, they carve their metal crafts and simply bend. Such a copy is not suitable for reenactment.Trust professionals, buy the right hooks here in the "Replika".We offer hooks made of aluminum (production ceased in 1940) and steel (produced 1940-..

6.00 €

Pebbled 12 mm shank button for German caps and other headgear. Assembled from three parts (front, rear and the leg). The front part is aluminium (white metal). The back of the leg and brass/copper. Button bears no stamps. Price for 1 pc. You usually need 2 pcs. for 1 cap...

1.00 €

A copy of the grommet, which was used in the German army to strengthen the cord-holes on the equipment. It has an inner diameter of 17 mm and an outer diameter of about 32 mm, which corresponds to a small grommet on a tent (Zeltbahn).Grommets for the army were made of aluminum or zinc. Later made of galvanized steel. Aluminum and zinc (early) ones are the hardest to get today, reenactors often replace them with modern steel ones. This grommet is more suitable for use in reenactment.Price for 1 grommet + washer (for 1 hole with a clearance of 17 mm). The installation device is sold separately.Take a look at the photo below comparing the original grommet and our copy.The photo above shows the original grommet.Our copy of the grommet...

1.50 €

A very rare copy: a button of reduced diameter, which was used on the pockets of the SS uniform before the war (and on service uniforms during the war). It could also be used for shoulder boards (because the diameter is similar to special screw-buttons). The diameter of 16 mm, it is slightly smaller than the usual uniform, but slightly larger than the button for the caps.The button is made of two aluminum halves, EXTRA FEIN is inscription below, the leg is copper. Tip: the foot can be covered with silver paint so that it does not stand out...

1.25 €

A copy of the grommet, which was used in the German army to strengthen the cord-holes on the equipment. It has an inner diameter of 9 mm and an outer diameter of about 19 mm, which corresponds to a small grommet on a tent (Zeltbahn), or on any type of army backpack.Grommets for the army were made of aluminum or zinc. Later made of galvanized steel. Aluminum and zinc (early) ones are the hardest to get today, reenactors often replace them with modern steel ones. This grommet is more suitable for use in reenactment.Price for 1 grommet + washer (for 1 hole with a clearance of 9 mm). The installation device is sold separately.Take a look at the photo below comparing the original grommet and our copy.The photo above shows the original grommet.Our copy of the grommet...

1.00 €

A metal device for installing grommets (respectively to the diameter). It consists of an upper and a lower part. Allows you to roll the grommets both manually and with a press.To prevent the grommet from crumpling during installation, the height of the cylinder should be 25% greater than the thickness of the fabric (no more)...

20.00 €

Plastic jar, resistant to paint, solvents and alcohol. Suitable for food as a disposable container. PET plastic 1 (Polyethylene terephthalate). The range of application is huge. Volume 40 ml. Height with cover 58 mm, base diameter 42 mm...

0.32 €

 The button is assembled from three parts: top, bottom and leg. Buttons are painted in a dark shade of feldgrau. Button has no manufacturer's stamp.German uniform button made of aluminum - the copy of the 19 mm button, which was used in the Third Reich for a variety of military uniforms.The buttons are dyed in the dark field grey. Buttons without marks. On the upper side of the button, a number (in Arabic numeral) from 1 to 9 is embossed, and 6 and 9 are different buttons (they have a dot next to the number to distinguish them). Other numbers can be ordered, but the price will be twice as high, the waiting time is 2 months.Buttons of very high quality, made of aluminum, consist of three parts: top, bottom and stem (just like the original ones). Cheap copies are usually cast entirely f..

17.00 €

German uniform button made of aluminum — a copy of the 19 mm button, which was massively used in the Third Reich for a variety of military uniforms. The button is assembled from three parts: top, bottom and leg. Buttons are painted in a dark shade of feldgrau. Button has no manufacturer's stamp.Price for 1 pc...

1.00 €

German uniform button made of zinc alloy, the copy of the standart German 19 mm button. It's made by mold. The button has on the reverse side convex letters R.P.K.Price for 1 pc. These buttons also have a wholesale price for a quantity of 100 pcs.We sell buttons in three colors:- feldgrau (pale green, close to the color of a field jacket) — buttons were painted in this color until 1940, they could be used until the middle of the war (1943);- dark grey (often it still glistened hideously) — this color was used for buttons after 1942 (as well as for M42 helmets);- without paint (gray-silver color of metal) — buttons could be unpainted (especially on the uniform of officers), and unpainted buttons can be independently painted white for winter uniforms.Please choose th..

0.40 €

German uniform button made of aluminum with a diameter of 19 mm. The button is assembled from several stamped parts, just like the original one. Suitable for officer uniforms or for painting in different colors as needed...

1.00 €

German uniform button made of brass with a diameter of 19 mm on the leg. Suitable for the uniforms of generals, as well as naval officers and various party organizations.A modern copy...

1.00 €

Buttons from German field jackets, original. There is corrosion, oxides. Different stamps of the 1930s and 1940s. There are zinc and aluminum.We'll try to collect a set with the same metal and stamp for you! Please ask in the comment when ordering.Buttons require careful cleaning before use. It cannot be subjected to strong machining, since, for example, white spots on zinc or aluminum with strong machining can turn into holes that will have to be filled with putty or resin with aluminum powder. It is assumed that the buttons, after easy cleaning and alignment, will be painted on top in the Feldgrau colour, after which they will start to look good. If you are not going to paint them, if you need a perfect result, then you need to buy copies of such buttons or mint originals (good mint orig..

1.50 €