Germany, Reich

Helmets, headdress
Uniform, clothes
Fabrics, camo
Insignia, decals
Awards, badges
Belts, buckles
Equipment, bags
Rations, personal stuff
Misc., parts
Boots


Peaked cap WSS NCO w/o insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.It is sold without insignia and cord. Add an option and we will install insignias and cord for you. Attention! We install high quality insignias and cord (see photo). We can make finalize the cap for an officer or for soldiers and feldwebel (sergeant). If the necessary parts are not available in the store, then they will have to wait..

50.00 €

In stock
WhH Panzer peaked cap w/o insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.It is sold without insignia and cord. Add an option and we will install insignias and cord for you. Attention! We install high quality insignias and cord (see photo). We can make finalize the cap for an officer or for soldiers and feldwebel (sergeant). If the necessary parts are not available in the store, then they will have to wait..

50.00 €

In stock
WSS Panzer black cap museum quality

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.A magnificent copy of the German SS tank-crew cap. The cap was created based on the original cap, high-quality authentic materials and very good insignias of original quality (with a mirror underside) were used. The cap is made of cloth and fastened wit..

65.00 €

In stock
Green shirt with straight pockets

The feldgrau-green colour shirt (cold shade of green) and olive-green colour (warm shade of green) shirts with pockets. A shade to choose from.Breathable cotton fabric, knitted weave. The pockets are a simple rectangular shape, without a fold, with the same simple rectangular flap. This is the latest version of pockets, completely simplified, which appeared no earlier than 1944.Features of the original shirt are well copied: the shape and size of the pockets, long back, pointed ends of the collar. Factory quality, made on professional equipment at the sewing enterprise. Our own production.The shirt is suitable for reenactment and civilian use, especially for outdoor activities and sports, as it reliably covers the lower back (unlike T-shirts).There is no fold on the chest. At the end ..

45.00 €

In stock
Full open parka Italian camo

Full front open parka (late model) in Italian camouflage. We used natural fabric, camouflage was copied from the original cape-tent. 2 external pockets on the chest, 2 internal insulated pockets on the front of the hips. Elastic waist (not adjustable). The hood is tightened with a drawstring. The hood is very spacious, it easily covers the head in a steel helmet and remains a reserve that protects from wind and snow.The parkas are almost sold out. No new run is expected yet.The wrists are protected from snow and cold air by internal elastic cuffs. In the hood and around the body fur, in the sleeves insulation made of recycled mixed wool and cotton fabric (as in the original). Lining in the sleeves of cotton or artificial silk (there were different materials on different original sampl..

375.00 €

Out of stock...
Suspenders Y-shape economic

Braces that were used by the Czech army after the war. They repeat the German model, but they are made with simplifications: a slightly thinner elastic, the tips are made of artificial leather, and not genuine. Army quality factory. Good not expensive alternative for use in reconstruction and in life...

15.00 €

In stock
Close Combat clasp (Heer, silver)

If you need additional photos of the product, write to us by email or in the messenger.Close Combat bar, good quality casting with matte bronze finish. Sturdy pin. FLL Berlin manufacturer's stamps on the back side...

32.00 €

In stock
Helmet decal KM eagle

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose!The price is for 1 (one) shield, not for a pair (not for a set). The buyer collects the kit independently, buying the necessary number of shields.To see additional photos please follow the link.We offer high-quality copies of original designs produced exclusively for our store. Our decals are an independent development. Decals have the accurate proportions and good detailing. Decals were printed on a professional..

4.00 €

In stock
WH helmet decal aged

The price is for 1 (one) shield, not for a pair (not for a set). The buyer collects the kit independently, buying the necessary number of shields.To see additional photos please follow the link.We offer high-quality copies of the original patterns, produced exclusively for our store. Our decals are an independent development based on original designs. The decals have the accurate proportions, they are printed on professional equipment.The decals are artificially aged, that is, the white color is yellowish, and there are already scratches and chips on the image. Such decals are well suited for reenactment, so that they do not look new as from the factory. They are also good for film production.How to install the decal? Put a piece of paper with the image (as it is, do not cut anything) in w..

4.00 €

In stock
Side-cap eagle + cockade M40 WhH pre-folded

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.The price is for 1 set (for 1 headdress). These insignias are made specially for our store, they bear the "Replika" logo. They have an accurate geometry and neatly executed details. The insignia set for the side-cap consists of two parts: an eagle ..

12.00 €

In stock
Coast artillery side-cap insignia set eagle + cockade

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.The set is made specially for our shop, it bears the logo "Replika" and have a smooth geometry and fine details. The insignia perfectly repeat the colors of the originals.The set consists of two parts: the eagle and the cockade. It is woven with&nb..

5.50 €

In stock
Metal eagle and cockade for WhH peaked-cap set

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.A set of metal badges for the Heer peaked-cap. It is attached by the paws, which are on the inside. Without stamps. Economy-quality copy for mass scenes in the cinema or budget reenactment.The price for a set of signs for one cap (eagle + cockade)...

14.00 €

In stock
LfW cap insignia eagle and skull trapezoid

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Standard Luftwaffe cap insignia. The trapezoid made of gray-blue cloth with the embroidered eagle and the three-colored cockade...

10.00 €

Out of stock...
WSS eagle BeVo for cap

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose!The SS cap insignia made in BeVo (jacquard) technic. Such eagles were worn on headdress with the same style skull (made as a separate piece).This pale-white eagle is neatly and finely embroidered, suitable for reenactment, movie production and museums of military history.To see additional photos please follow the link.How to sew the patch? There are 2 ways.I. Method for museum copies. Trim the excess along t..

8.00 €

In stock
WSS skull BeVo for cap

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose!The SS cap insignia made in BeVo (jacquard) technic. Such skull was worn on headdress with the same style eagle (made as a separate piece).This pale-white skull is neatly and finely embroidered, suitable for reenactment, movie production and museums of military history.To see additional photos please follow the link.How to sew the patch? There are 2 ways.I. Method for museum copies. Trim the excess alon..

8.00 €

In stock
WSS officer's sleeve eagle

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The eagle is embroidered with a silver metal gimp on black cloth. SS Officer arm eagle. Size 9.5x4 cm.How to sew the patch? Attach the patch to the uniform so that it sits well. Glue the patch or fasten it in another way (for example, stitch it with a thread of noticeable color). Sew the patch by perimeter with small stitches over th..

15.00 €

In stock
Collection of German street signs and signboards

Enamel metal plates: street names, factories, institutions, house numbers, warning signs.Sold as a lot (all at once). One by one or bychoice not sold.Plate sizes in millimeters:1. Ostbauernführer (eagle with a swastika on a white background) - 345x3902. "19" - 150x1503. "23" - 150x1204. "13" - 180x1805. Albrecht - 100x506. Kipptopfgruppe - 90x507. Nicht hinauslehnen! - 150x308. Index of institutions (with arrows) - 300x2009. Yellow table with numbers - 100x20010. Feuersozietät Brandenburg (Brandenburg Fire Department) - 160x24011. 40 km (speed limit sign) - ~ 21012. Blitz-Schutz (red lightning) - 150x20013. Rostok (yellow with red letters) - 160x9014. Achtung (yellow with red lightning) - 170x14015. Parterre - 250x10016. Deutscher Bauerndienst (black and yellow) - 125x16517. Wasser (blue w..

690.00 €

Out of stock...
Signalman Helferin Badge

A copy of the helpers badge (German: Helferin), worn on a tie by signalmen (German: Helferinnen Signals) during World War II. It is made of metal coated with enamel and is attached with a pin. The smallest details are reproduced.This is an exact replica of the original badge and can be used as a decorative item or a collectible item. It also makes a great gift for military history buffs or collectors...

19.00 €

Out of stock...
Сuff title Hermann Goering

The Hermann Goering regimental ribbon is woven with off-white thread on dark blue cloth. Great quality for military historical reenactment...

20.00 €

In stock
WSS waist belt without buckle

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose!You can buy a buckle separately on our website. It's impossible to wear the belt without a buckle. We offer all basic buckle types made of steel or aluminum as well as rare buckles. If you need a tab for a buckle you can buy it separately. You can wear a buckle without a tab (tabs for some buckles are not obligatory).This is waist belt of high quality. It's made of tight and resilent bull leather. Leather is not ..

45.00 €

In stock
Iron Cross 1st class 1914

Replica of the German Iron Cross 1st class 1914. This product is a replica of the famous military order. The pin attachment prevents the sign from turning over. Size about 45 mm.We offer crosses with different silver plating options:- light silver,- silver with patina (dark "old" silver).The silvering option should be selected next to the "Add to cart" button before ordering. If an option is not there, it means this item currently sold out.Comparison of the color "silver" and "silver + patina" is given below, silver is lighter. The Iron Cross 1st class 1914 was supposed to be awarded to military personnel who showed particular bravery and courage in battle. It became a symbol of the heroism and dedication of German soldiers during the First World War.Our replica is made of high-qualit..

25.00 €

In stock
Stainless steel fork-spoon, mess-kit

Stainless steel fork-spoon, the standart dining set of German soldier. The Germans called it Göffel (like "fork-spoon") from the merger of the two words Gabel (fork) and Löffel (spoon). Weight is 84 g...

18.00 €

In stock
Tropical DAK cover for field bottle 1 liter

The field bottle in the photograph is not for sale. It demonstrates how our cover looks on the original flask. You can assemble such a flask by yourself using the accessories that are sold in our store (cover, strap, lid, mug). Getting the original aluminum flask is still not a problem nowdays.The material is felt of a yellow-brown color (unlike the brown covers intended for the European theater of operations). Not cloth (without woven structure). Thickness about 1.5 mm.We offer options: smooth black leather or sand colour cotton 16 mm strap. Choose the option next to the Add to cart button. If an option cannot be selected, it means that it is sold out.Options for details to choose from: cotton webbing (left) or smooth black leather (right).The buttons have a good deep "stars" on face..

42.00 €

In stock
Sheath for a bayonet Mauser 1884/98

Sheath to the German Mauser 98 rifle or carbine. Good copy, neat shape. There is brass brazing, as on the originals, between the main part of the scabbard and the hook, as well as the “droplet” at the tip. The bayonet comes in softly and firmly.The “individual” number 1773k and the name of the manufacturer are stamped on the sheath. In the period from 1937 to 1940, manufacturers of cold weapons in Germany had the right to brand the abbreviated name of their company on their products. Three-digit codes existed before, and three-letter codes appeared later. The year 1938 and the manufacturer E. u. F. Hörster (Emil and Fritz Hoerster from Solingen).Blackened.Attention! The scabbard is treated with anti-corrosion powder. The powder irritates the skin and mucous membranes! Before using, th..

25.00 €

In stock
[on order] Eagle stamp

The product will be ready for shipping from 1 to 3 weeks after payment, after which all the goods you ordered will be sent to your address in one parcel. It is better to order ready-made goods from the warehouse separately, then we will send them immediately.Order more stamps in one order to get a discount!This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need ..

52.00 €

To order
Hardware set for Mauser pouch

An accurate and high-quality copy of the accessories for 1 piece of the Mauser pouch. Cheap copies of pouches often have good leather and threads, but very simplified accessories that need to be replaced. For example, pegs with a thread, not welded D-ring and so on.The set includes 3 pegs with washers, 1 D-ring and rivets with washers of different shapes. The material is aluminum (for pouches manufactured before 1940 inclusive). There were two types of pegs for such pouches: for the central section (rounded tip, "pear" — 1 piece in a set) and for the side sections (sharp tip, "mushroom" — 2 pieces in a set).For riveting during installation, a special stop may be needed so that the peg or rivet does not move on impact, and the tip comes out in a beautiful spherical shape. You can install th..

15.00 €

In stock
BMW Labor Front mug 330 ml

Porcelain mug with the symbols of BMW factories (Bayerische Motorenwerke = Bavarian Motor Factories) and with the hallmark of the Beauty Work Bureau (Schönheit der Arbeit).BMW was founded in 1916, initially as a manufacturer of aircraft engines. It is believed that the place was chosen for the purpose of cooperation (and proximity) with a well-known aircraft manufacturer in Bavaria. By the mid-1930s, the company was Europe's largest industrial concern. It produced aircraft engines, automobiles, and many smaller equipment and parts. During the Second World War, like many German companies, it used free labor from prisoners of war and the regime. Developed and implemented missile weapons and other types of advanced military technologies.After the war, despite a series of prohibitions and the ..

8.00 €

Out of stock...
Gott Mit Uns mug with the iron cross 330 ml

A porcelain mug depicting an iron cross model 1914 and the inscription Gott mit Uns (God with us). The coat of arms of Prussia (the eagle) with dates 1914 and 1916 is on the other side of the mug.We offer a quality copy for domestic use and, undoubtedly, a good gift for friends! The mug is a decoration of its time and can be used in reenactment, filming. It weighs approximately 300 g and holds 330 ml of liquid. The diameter is 8 cm, the height is almost 10 cm. The inscriptions are applied by hot decalcification (paint is injected into the surface at high temperature), this is not a cheap stencil. The inscriptions are fixed securely and can be washed in a dishwasher...

8.00 €

Out of stock...
Gott Mit Uns mug with the cross in wreath 330 ml

A porcelain mug depicting an iron cross model 1914 and the inscription Gott mit Uns (God with us) in an oak wreath. The image of the cross on one side, and another side is white withour an image. The mug does not contain Nazi symbols!We offer a quality copy for domestic use and, undoubtedly, a good gift for friends! The mug is a decoration of its time and can be used in reenactment, filming. It weighs approximately 300 g and holds 330 ml of liquid. The diameter is 8 cm, the height is almost 10 cm. The inscriptions are applied by hot decalcification (paint is injected into the surface at high temperature), this is not a cheap stencil. The inscriptions are fixed securely and can be washed in a dishwasher...

8.00 €

Will be later
Mug of the 4th SS Police Division 350 ml

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Porcelain mug with a shield (symbol) of the 4th SS Police Division of the Third Reich. The division received this name, as it was formed from the personnel of the police units. In the uniform of this division, a unique feature was preserved — police col..

8.00 €

In stock
Mug Christmas 1935 mountain regiment 99

A porcelain gift mug in memory of the first military Christmas night of the 3rd company of the 99th Mountain Regiment (Gebirgs-Jäger-Regiment 99) after its creation in 1935. The 3rd company was part of the 1st battalion, the battalion was recruited from the 1st training battalion of the 19th Infantry Regiment (I. Ausbildungs-Bataillon des Infanterie-Regiments 19) and was initially stationed in Kempten (southern Bavaria). Participated in battles in France, Yugoslavia and the USSR. Source: lexikon-der-wehrmacht.de.The mug depicts a battalion fighter in a mountain jäger cap with a loaded mule framed by a rope and with an edelweiss flower below. The inscription WEIHNACHTEN (Christmas) 1935 — 3.KOMP.GEBIRGS-JÄGER-RGT.99. Mugs with such an image really existed. We offer ..

12.00 €

Out of stock...
Mug Christmas 1939 mountain battalion 56

A porcelain gift mug in memory of the first military Christmas night of the 1st company of the 56th mountain carrier battalion (Gebirgs-Träger-Bataillon 56) in 1939. The battalion was formed in August 1939 and operated in 1940 in Norway and Finland. Source: lexikon-der-wehrmacht.de.The mug depicts a battalion fighter in a mountain jäger cap with a loaded mule framed by a rope and with an edelweiss flower below. The inscription KRIEGSWEIHNACHTEN (military Christmas) 1939 - 1. KOMP. GEB. TRG. - BATL. 56. Mugs with such an image really existed. We offer a quality copy for domestic use and, undoubtedly, a good gift for friends!The mug is a decoration of its time and can be used in reenactment, filming and expositions. It weighs approximately 300 g and holds 330 ml of liquid. The diam..

8.00 €

In stock
Mug Christmas 1940 mountain battalion 99

A porcelain gift mug in memory of the first military Christmas night of the 2nd company of the 99th mountain replacement battalion (Gebirgs-Jäger-Ersatz-Bataillon 99) in 1940. We are talking about a reserve battalion, that is, where the recruits were trained, after which they were transferred to the main unit (the regiment with the same number). Personal ID tags, as a rule, remained the same, with the word "Ersatz" in the designation of the battalion. Christmas of 1940 for the 99th regiment was a time of calm before the storm... In June 1940, the regiment was taken to rest after the surrender of France, and in the spring of 1941 it began an assault on Yugoslavia, and then to Russia. Source: lexikon-der-wehrmacht.de.The mug depicts a battalion fighter in a mountain jäger cap with ..

8.00 €

In stock
Mug with edelweiss of the 1st mountain division

Porcelain mug with the emblem 1.Geb.Div (1st German Mountain Division) in the form of a white edelweiss flower on a black shield and the inscription EDELWEIß. On the other hand, an edelweiss is also shown, but here in the form of an emblem on a mountain cap.The stripes on the top of the mug can be black or black-white-red, depending on the batch of issue.Mugs with such an image really existed. We offer a quality copy for domestic use and, undoubtedly, a good gift for friends!The mug is a decoration of its time and can be used in reenactment, filming and expositions. It weighs approximately 300 g and holds 330 ml of liquid. The diameter is 8 cm, the height is almost 10 cm. The inscriptions are applied by hot decalcification (paint is injected into the surface at high temperature), this is n..

8.00 €

Out of stock...
Mug with edelweiss of the german Gebirgsjäger

Porcelain mug with the emblem of the 1st Mountain Division (1.Gebirgs-Division) in the form of a black edelweiss flower and the inscription 1.GD. On the other hand, an edelweiss is also shown, but here in the form of an emblem on a mountain cap. The mug does not contain any prohibited symbols!The stripes on the top of the mug can be black or black-white-red, depending on the batch of issue.Mugs with such an image really existed. We offer a quality copy for domestic use and, undoubtedly, a good gift for friends!The mug is a decoration of its time and can be used in reenactment, filming and expositions. It weighs approximately 300 g and holds 330 ml of liquid. The diameter is 8 cm, the height is almost 10 cm. The inscriptions are applied by hot decalcification (paint is injected into th..

8.00 €

In stock
High beer mug Edelweiss 1st Mountain Div.

Porcelain beer mug with the symbols of the 1st mountain division of the Wehrmacht: on the sides there is a picture of the edelweiss (flower) in the form as it was present on the mountain Jägers' caps, and in front (opposite the handle) there is a picture of the division's coat of arms (also with the edelweiss) and the signature of 1 Geb. Div. Edelweiß.We offer the following mug options to choose from:volume of 1 liter (+ 2 cm per foam),volume 0.6 liters, a classical massive German beer mug, wide at the bottom and tapering up.In the photo you can compare two mug options.We offer a quality copy for domestic use and, undoubtedly, a good gift for friends! The mug is a decoration of its time and can be used in reenactment, filming and expositions. The inscriptions are applied by hot decalcifica..

22.00 €

In stock
Plate Legion Condor Spain

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Porcelain plate — a replica of a memorial plate from the first half of the ХХ century. Such dishes were made in memory of service, military campaigns, for various military and political organizations in Germany. Such porcelain is called propaganda-..

17.00 €

Out of stock...
Plate with german girls

This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Porcelain plate — a replica of a commemorative plate of the Association of German girls (German: BDM - Bund Deutscher Mädel). In the center of the plate are dancing girls around a staff with a swastika (the image has been corrected in accordance with th..

15.00 €

In stock
Insignia colour cloth from a piece 10x10 cm

Thin woolen cloth smooth fabric for all kind of insignia (collar tabs, shoulder boards), manufacture of clothes elements (tops of the Red Army peaked caps), edging and piping (i. e. trouser stripes) etc. We offer the most popular colors, we don't have other colours.• Red is the color of the artillery of the German and Soviet armies, but is widespread in other armies of the world.• Black - material for collar-tabs, shoulder straps and patches of the SS. It is possible to use it for German tank crew uniforms and headgear manufacture.• Blue is suitable for German medics or NKVD USSR caps/trousers.• Crimson - the infantry colour in the Red Army.• Yellow - Luftwaffe collar tabs colour.Price is for piece 10x10 cm (square decimeter or sq.dm) — you can see it in the picture.We can cut a ..

0.40 €

In stock
Armband with red cross

Armband of a medical orderly. Suitable for reenactment of orderlies around the world. This item was made in the USSR after World War II. Without manufacturer's marks. The cross is painted and does not crack. Ties on four sides.The size of the main fabric of the bandage is 35x10 cm, plus the length of the ties is 16 cm. The size of the red cross is 8 cm...

5.00 €

In stock
3 mm red rubber

Red silicone rubber 3 mm thick. Not afraid of deformation, heating, solvents. From this material, you can cut out the gasket of the shape that you need: on a canister, water tank, food thermos, etc.The price for a piece is 5x5 cm. Only one piece 5x20 cm left (4 units of the item).We cut any pieces (write the size in the comments to the order). The price for a piece of your size is obtained from the number of pieces of 5x5 cm that fit in this size. For example, a piece of 10x15 cm is 6 times 5x5 cm, that is, 6 units. If you are not sure that you calculated correctly, contact us in any way, we will help!How to work with rubber? In order to cut the gasket, you can use a sharp knife, scissors (with scissors the result will be rougher) or a specially made cutting (metal cutter in the shape..

1.50 €

Out of stock...
Linen thread for leather

Price for 1 meter (≈39⅓ inches).Linen thread for leather. Width ≈1.3 mm.The thread is not waxed, it has yellow-gray colour of natural linen. You can wax it by yourself usung a candle or special wax bar. You can colourate it to yellow "old" colour using thin paint. The thread is new (not stale), but it's less strong than modern synthetic threads. You should take account of it when you tighten loops...

0.25 €

In stock
Cotton thread for leather

Price for 1 meter (≈39⅓ inches).Cotton thread for leather. Width 0.8 and 1.3 mm (you should choose before buying). Thread 0.8 mm is nice for small items e. g. helmet chin-strap, and thread 1.3 is for large iterms like waist belt or Y-strap.The thread is not waxed. You can wax it by yourself usung a candle or special wax bar. You can colourate it to yellow "old" colour using thin paint. The thread is new (not stale), but it's less strong than modern synthetic threads. You should take account of it when you tighten loops...

0.19 €

In stock
Flashlight bulb

Incandescent light bulb for a pocket flashlight. These were used in flashlights of the Wehrmacht, Red Army, etc. during the Second World War. Specifications: 4.5V 0.5A, suitable for large flat batteries such as Gnome (Гном), Daimon, Varta etc.Nowadays, LED lamps are offered everywhere, and it is difficult to find an incandescent lamp to get the correct "yellow" light of the lantern on the reconstruction.Price for 1 light bulb...

2.00 €

Will be later
Toothbrush of the WhH, Red Army

Brush with a transparent plastic handle and natural bristles. The color of the pen can be orange, pink, but always transparent. Original, post-war production. Suitable for the German and Soviet army WW2 reenactment.The price is for 1 brush, other items in the photo are shown to improve the illustration.There may be a recommended price marking in golden letters on the brush handle. This is not a defect or a reason for a discount. If you don't like it (for example, for the reenactment of the Heer), it can be erased with acetone or No. 646 solvent, nail wash, or wiped with a fine sandpaper; then polished with felt or wool cloth...

6.00 €

In stock
Insignia sewing (service)

You can sew the insignias yourself. But it's impossible to do it well the first time. Even if you have "a neighbor seamstress", (s)he most likely does not know which stitch, which threads and at what distance from the shoulder to sew a patch. Moreover, sewing a BeVo (that is, a thin) patch by hand from an untrained person takes about 3 hours. And if there is no experience in folding BeVo insignias before sewing, then you can simply destroy the insignia and actually lose money. Entrust the work to experienced people!How do they sew?There are several craftsmen who know the historical and sewing part of the work. We sew by hand, by a mashine, on a substrate - in all ways according to your request. Of course, we will do this historically correctly (some patches in the original were s..

29.00 €

In stock
Ushanka hat natural white fur

Winter fur hat of the Wehrmacht model 1943. Modern production. High quality copy. Sewn like a Russian hat with earflaps, but with an oval crown. Made from cloth and natural fur. Thanks to this, the hat warms well in winter frosts.Rabbit fur is natural, it should not to be wetted, otherwise the skin under the fur will become stiff. Hat has ties at the tips of earflaps and also a button with a loop. It is better to attach the hat to the button when folded, so it turns out more accurately. Use ties to fasten under the chin. Inside the dome there is a stamp with the name of the manufacturer and the size of the hat.Suitable for supplementing collections, military-historical reconstruction of the uniform of the Wehrmacht during the Second World War, filming in documentaries.The color of the thre..

89.00 €

In stock
Ushanka hat natural gray fur

Winter fur hat of the Wehrmacht model 1943. Modern production. High quality copy. Sewn like a Russian hat with earflaps, but with an oval crown. Made from cloth and natural gray fur. Thanks to this, the hat warms well in winter frosts.Rabbit fur is natural, it should not to be wetted, otherwise the skin under the fur will become stiff. Hat has ties at the tips of earflaps and also a button with a loop. It is better to attach the hat to the button when folded, so it turns out more accurately. Use ties to fasten under the chin. Inside the dome there is a stamp with the name of the manufacturer and the size of the hat.Suitable for supplementing collections, military-historical reconstruction of the uniform of the Wehrmacht during the Second World War, filming in documentaries.The color of the..

89.00 €

Out of stock...
Cap 1943 feldgrau

M43 made of  feldgrau cloth with olive or gray lining (depends on batch). The visor has a soft insert of several layers of fabric, so the cap can be put in your pocket and washed in the washing machine. There are special loops on the inside of the flaps which serve to hold a special cloth acceccory (extra cold protection) or hold ends of the flaps when they are down (in cold season). The buttons of earflaps are under the chin (not under the nose) if you fold them properly and unsing these loops.Buttons not painted (silver colour, aluminum), despite the fact that they are painted in the photo. We can take a photo of exactly your future cap before your purchase. You can buy a cap with painted buttons cap here Cap 1943 black Replika.There are nice ink stamps inside the dome of ..

32.00 €

In stock
Feldgrau cap variant 2

The color of the threads, cloth and lining may be slightly different from batch to batch (and from the photo), but always remains within the historical compliance. We can take a photo of exactly your future cap before your purchase.Cap produced by "Replika" in Russia. We carefully studied the original caps and created our own copy. We declare that it is the best copy of the M43 cap in the world (here it is necessary to consider that there were many variations of M43s, they were sewn on tens of the enterprises; seams, even length of the visor were a little different). At the same time our copy is very carefully sewn, the highest factory quality.Original caps have differences depending on the year of production and the manufacturer. We collected the characteristic features of the early assem..

25.00 €

In stock
Cap WhH  feldgrau 1943 with insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The  insignia is sewn on at the factory. It is sewn under the lining, not through. Very accurate and reliable performance.The visor of the cap is reinforced with a thin insert, like the original. The visor can be wrinkled, twisted and straightened again, you can stuff the cap into a gas mask tank or pocket, you can wet it i..

50.00 €

In stock
Cap WSS  feldgrau 1943 with insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The  insignia is sewn on at the factory. It is sewn under the lining, not through. Very accurate and reliable performance.Copies the late original SS combined insignia — eagle and cockade in the shape of a trapezoid.The visor of the cap is reinforced with a thin insert, like the original. The visor can be wrinkled, twisted ..

50.00 €

In stock
Feldgrau cap 1 button

Cap produced by "Replika" in Russia. We carefully studied the original caps and created our own copy. We declare that it is the best copy of the M43 cap in the world (here it is necessary to consider that there were many variations of M43s, they were sewn on tens of the enterprises; seams, even length of the visor were a little different). At the same time our copy is very carefully sewn, the highest factory quality.The cap has one 19-mm button on the front. This option was used mainly in the SS field units.Visor of standard length (6-7 cm), not shortened. Insert of soft, supple and elastic material is inside that is water-resistant. The visor cannot be broken. If you bend it fully (cock), it will keep the form. But when it is then unbent, it'll be plain again almost without traces.Some be..

25.00 €

In stock
Cap WSS with insignia one button

This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.Cap of our production with an insignia. The  insignia is sewn on at the factory. It is sewn under the lining, not through. Very accurate and reliable performance. Caps with one button were characteristic of the SS. To see additional photos please follow the link.High-quality insignia is also our production. Copies..

50.00 €

In stock
Black cap

The color of the threads, cloth and lining may be slightly different from batch to batch (and from the photo), but always remains within the historical compliance. Buttons not painted (silver colour, aluminum). We can take a photo of exactly your future cap before your purchase. You can buy a cap with painted buttons cap here Cap 1943 black Replika.The visor has a soft insert of several layers of fabric, so the cap can be put in your pocket and washed in the washing machine...

27.00 €

In stock
Black cap variant 2

Cap produced by "Replika" in Russia. We carefully studied the original caps and created our own copy. We declare that it is the best copy of the M43 cap in the world (here it is necessary to consider that there were many variations of M43s, they were sewn on tens of the enterprises; seams, even length of the visor were a little different). At the same time our copy is very carefully sewn, the highest factory quality.Original caps have differences depending on the year of production and the manufacturer. We collected the characteristic features of the early assembly in our cap (seams, cut, etc.) common for 1943 production. For example, the flaps are made so that the seam is turned inside out along the entire length, and where it comes to the side cap detail, it is put face out. Later they b..

25.00 €

In stock
Blue-gray cap

The color of the threads, cloth and lining may be slightly different from batch to batch (and from the photo), but always remains within the historical compliance.Cap produced by "Replika" in Russia. We carefully studied the original caps and created our own copy. We declare that it is the best copy of the M43 cap in the world (here it is necessary to consider that there were many variations of M43s, they were sewn on tens of the enterprises; seams, even length of the visor were a little different). At the same time our copy is very carefully sewn, the highest factory quality.Original caps have differences depending on the year of production and the manufacturer. We collected the characteristic features of the early assembly in our cap (seams, cut, etc.) common for 1943 production. For exa..

25.00 €

In stock
Blue-gray cap single button

Cap of blue-gray cloth with one 19-mm button. Lining of brownish-beige artificial silk (cotton in 1943 was no longer used for lining, because cotton had become a deficit by that time). Button is aluminum, painted in pale blue. The cap has loops in order to keep the ears when they are down. Ink stamp with the manufacturer number, size and year of production is on the cupola.Visor has standard length (6-7 cm), not shortened, inside is insert of soft, supple material that is water-resistant. Our material is reliable to aging and resistant to water (washing). The visor is soft, easy to bend, and when the cap is on the head, the visor he takes the form of a beautiful arc. It can be given the triangular shape (as happened with worn caps of veterans). The visor should be strongly bent for this — ..

25.00 €

In stock
Jäger cap

Jäger cap: short visor, leather tape around the head, the characteristic brown buttons. The cap is made of thick cloth, has ventilation holes on sides, and has stamp of the manufacturer and size inside on the cupola.Inside of the visor is cardboard. The cap shouldn't be washed in the washing machine. You should apply a liquid cleaner on the contaminated areas, rub these with a brush or sponge and rinse with a stream of water. Dry expanded.The material of the lining, buttons and stamps may differ from that in the photo, but will be within the historical compliance.T-form insignia was usually sewn on the front. You can buy it from us and sew on your own, or choose a cap with already sewn insignia, made by a scilled tailor.Price for 1 cap. Other items in the photo are not included i..

35.00 €

In stock
 Jäger cap variant 2

Cap of the Jäger troops: short visor, leather tape around the perimeter of the head, brown buttons. The cap is made of dense cloth, has holes for ventilation on the sides, and a manufacturer's stamp inside.The lining material may differ from what is in the photo, but will be within the framework of historical compliance. Additional photos on request (note the size you wish)...

30.00 €

In stock
Jäger cap with Т-shape insignia

This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose!Jäger cap: short visor, leather tape around the head, the characteristic brown buttons. The cap is made of thick cloth, has ventilation holes on sides, and has stamp of the manufacturer and size inside on the cupola.To see additional photos please follow the link.Inside of the visor is cardboard. The cap shouldn't be washed in the washing machine. You should apply a liquid cleaner on the contaminated areas, rub t..

45.00 €

In stock
Jäger cap with Т-shape insignia variant 2

Cap of the Jäger troops: short visor, leather tape around the perimeter of the head, brown buttons. The cap is made of dense cloth, has holes for ventilation on the sides, and a manufacturer's stamp inside. An early T-shaped BeVo insignia is sewn manually.The lining material may differ from what is in the photo, but will be within the framework of historical compliance. Additional photos on request (note the size you wish)...

40.00 €

In stock
Jäger cap black colour

There were no such caps in the troops, but they could be ordered in private, because the model was extremely popular at that time. We did this cap not for reenactors, but for civilians who love “German style” and black colour.High quality woolen cloth and cotton for lining are used, inside is sheep leather band. Brown buttons are like Steinnuß (stone walnut) buttons, which were very common on the original jaeger caps of the time. Buttons on this cap are made of synthetic polymer, although at the beginning of the XX century they were made from walnut "corozo". Soft flexible insert is in the visor, it holds the visor, and it can not be broken. It is water-resistant. Inside the cap there is a manufacturer's mark.Cap looks impressive. Verified!..

29.00 €

In stock
Drillich summer cap

Drillich summer cap made by "Replika". Cotton HBT fabric. 2 pairs of ventilation holes. Gray artificial silk lining.Visor has standart lenght (6-7 cm, not shortened) and insert of soft, conformable and resilient material that is not afraid of water. The visor is impossible to break down. It will remember its shape when fully bended. And when you bend it back it will become straight almost with no traces. Ink stamps (manufacturer's number, year and size) inside the cupola.Other sizes will be available later this year...

25.00 €

In stock
Dots Erbsentarn camo cap

Very high quality camouflage cap of the SS. Produced by "Replica" in Russia. If you use the Dot uniform not for reenactment, but for tourism/hunting, then the cap will be very useful for you.Herringbone cotton fabric is quite light and is great for use in hot weather. A beautifully executed camouflage pattern, a neat copy without unnecessary "finishing" and "invention", which is often found on cheap copies. The correct shape of the bottom (inverted egg), wide visor, all the features of the assembly are respected (for example the line along the edge ends at the visor, and doesn't go above the visor, like on originals).All caps carry a beautiful, well-reproduced SS-BW marking (SS-Bekleidungswerke, clothing factories of the SS, the runes are specially split up in the photo). Arabic numerals o..

35.00 €

In stock
Dots Erbsentarn camo cap

Very high quality camouflage cap of the SS. Produced by "Replika" in Russia. If you use the Dot uniform not for reenactment, but for tourism/hunting, then the cap will be very useful for you.Cotton fabric is light and dense, has a water-repellent impregnation, drops roll off it! Great for use in autumn. A beautifully executed camouflage pattern, a neat copy without unnecessary "finishing" and "invention", which is often found on cheap copies. The correct shape of the bottom (inverted egg), wide visor, all the features of the assembly are respected (for example the line along the edge ends at the visor, and doesn't go above the visor, like on originals).All caps carry a beautiful, well-reproduced SS-BW marking (SS-Bekleidungswerke, clothing factories of the SS, the runes are specially split..

25.00 €

In stock
Oakleaf A camo cap

The cap is made in Russia from material produced in Russia. The camouflage is a neat and complete copy of the "Oakleaf A" pattern, almost 1x0.5 meters in size, without repeating the pattern, so there cannot be two identical caps. Very high quality camouflage pattern with the correct form of spots.The fabric is a copy of the German tent fabric (Zeltbahn) and corresponds to it in terms of texture and properties. Repels water due to the tight weave of the threads, just like the original fabric. Does not shine through in the sun. Like the original fabric, it is not waterproof: rain resistance is due to the swelling of the threads under the influence of moisture, which create a very dense surface.The cap is double-sided, fully reversible: on one side, the camouflage is made in summer (gree..

30.00 €

In stock
Blurred Edge camo cap

Replica camouflage double-sided SS cap. Made in Russia according to patterns developed by the Replika store on the basis of original samples. Camouflage fabric of our own production, dense cotton material. On one side green shades of spots for summer, on the other brown for autumn. The cap has the correct shape of the bottom (an inverted egg). To the right and to the left there are 2 air vents treated with a thread  (the metal edging of the holes was was rarely found on such caps and on the latest series).In the visor inlay is not afraid of temperature changes, does not break. It's shape-remembering, that is, the visor can be worn bended in any shape you like. Cap can be washed in a washing machine.On the "autumn" side there is a sweat-tape, it also closes the rim of th..

30.00 €

In stock
Planetree camo cap

Our copy of the SS camouflage double-sided cap is made in Russia according to the patterns developed by the Replika shop on the basis of original samples. The fabric is imported, dense cotton material, one side has green shades of spots for summer, the other has brown for autumn. The cap has the correct shape of the bottom (turned over egg). To the right and to the left there are 2 air vents treated with a thread (the metal edging of the holes was rarely found on such caps on the most recent series).In the visor inlay is not afraid of temperature changes, does not break. It's shape-remembering, that is, the visor can be worn bended in any shape you like. Cap can be washed in a washing machine.On the "autumn" side there is a sweat-tape, it also closes the rim of the cap. All this is sewn in..

25.00 €

In stock
Planetree camo cap

Our copy of the SS camouflage double-sided cap is made according to the patterns developed by the Replika shop on the basis of original samples. The cap has the correct shape of the bottom (an inverted egg). On the right and on the left, there are 2 air vents, processed with a thread (the metal edging of the holes was rare on such caps and on the latest series).The cap is made in Russia from material produced in Russia. The camouflage is a neat and complete copy of the "Platan 5/6" pattern, almost 2x1.5 meters in size, without repeating the pattern, so there can be no two identical caps. And that is why the "numbers" and "lines - the edges of the pattern" beloved by reenactors are rarely seen on caps. But they are!The fabric is a copy of the German tent fabric (Zeltbahn) and corresponds to..

30.00 €

In stock
Marsh Swamp camo cap

Swamp (Sumpf, Sumpftarn) camouflaged cap made by "Replika". Cotton fabric. 2 pairs of ventilation holes. Dull-olive lining.Visor has standart lenght (6-7 cm, not shortened) and insert of soft, conformable and resilient material that is not afraid of water. The visor is impossible to break down. It will remember its shape when fully bended. And when you bend it back it will become straight almost with no traces. Ink stamps (manufacturer's number, year and size) inside the cupola.Eyelets (holes in the sides of the cap) can have a different diameter, color and fit (the distance between them) within the historical framework.Variants of eyelets that are on the cap produced by Replika.Variants of eyelets on the original caps. Sources: therupturedduck.com, warrelics.eu, virtua..

10.00 €

In stock
Side cap М34

The cap of the 1934 model is the main headdress of the Heer soldier. It was also used in the SS before the introduction of a cap of its own design in 1940 (similar to the Luftwaffe cap). Feldgrau cloth, khaki cotton lining. Metal edging of the vent hole is black or feldgrau.The color of the materials may differ from what is shown in the picture, but it always remains within the historical correspondence. We are always ready to take a picture of your product at your request. Insignias usually are the Heer eagle and cockade and a piece of braid of the branch colour above the cockade like a triangle (disappeared during the war). Insignias can be purchased separately in our shop.There are many styles of wearing a cap: as a hat, on the side, on the back of the head, etc. However, the ..

22.00 €

In stock
Side cap М34 1934 with insignia

The cap of the 1934 model is the main headdress of a German soldier. Feldgrau cloth, khaki cotton lining. The metal edging of the fan hole is black.The insignias are sewn: an eagle and a cockade, as well as the edging of the color of the armed forces (infantry, white) in a triangle above the cockade.To see additional photos please follow the link...

50.00 €

In stock
Side cap М34 black

The side-cap of the sample of 1934 is the main headdress of the German soldier. Black cloth, cotton lining. Metal edging of the fan hole.The color of the lining may differ from what is shown in the picture, but always remains within the framework of historical conformity. We are always ready to photograph you exactly your product at your request.The cap is suitable for the Heeres Panzerwaffe (until the end of the war) and for the SS (only during the first years of the war, later in the SS began to use caps of another form)...

20.00 €

In stock
Side cap М34 with М40 insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.The cap of the 1934 model with insignia set of the 1940 model (against the background of the feldgrau)is the main headdress of a German soldier. Feldgrau cloth, beige cotton lining. The metal edging of the fan hole is black.The insignias are sewn: an ea..

50.00 €

In stock
Side cap М40

Feldgrau colour cloth, lining is grey or olive artificial silk or beige cotton.There is an ink marking inside the cap: the name of the manufacturer, the year of production (1940) and the size...

22.00 €

In production
Side cap М42

Side cap model 1942 with a flap that may cover ears like on model 1943 cap and two buttons on the front. Cotton lining of gray or olive color, eyelets (fans) made of metal and painted black.Buttons not painted (silver colour, aluminum), despite the fact that they are painted in the photo. We can take a photo of exactly your future cap before your purchase...

31.50 €

Out of stock...
Mountain Jäger officer peaked cap

This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.We produce the visor to order after payment. You can take any size. The production period is 1 month, there will be a discount for several caps.To order, please contact us by e-mail or call our phone:+7 916 571-6568to@reenact.storeThe cap of an off..

110.00 €

In production
AllgSS black peaked cap w/o insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.It is sold without insignia and cord. Add an option and we will install insignias and cord for you. Attention! We install high quality insignias and cord (see photo). If the necessary parts are not available in the store, then they will have to wait up to 2 months. Contact us before ordering insignia adding to be sure. You can also b..

50.00 €

In stock
Peaked cap WSS infantry officers w/o insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.It is sold without insignia and cord. Add an option and we will install insignias and cord for you. Attention! We install high quality insignias and cord (see photo). We can make finalize the cap for an officer or for soldiers and feldwebel (sergeant). If the necessary parts are not available in the store, then they will have to wait..

59.00 €

In stock
WSS infantry officer peaked cap crusher

If you need additional photos of the product, write to us by email or in the messenger.The cap of an SS infantry officer, it is the so-called "soft" or "crusher" model. It is distinguished by the absence of a spring in the dome, the absence of any cord in front and a soft visor made of leather or synthetic material. The military officers liked the cap very much, because it could be put in a pocket or bag, it was easy to wear inside vehicles, it was a real field cap, and not a ceremonial headdress that required attention and care.The peaked cap has field gray top, black velvet band, white piping. Visor made of genuine leather, with an additional synthetic waterproof coating on top.There's a leather band around the perimeter inside the cap, it has a perforation in front (to remove heat ..

 90.00 € 
80.00 €

In stock
[on order] Herman Meyer LfW tropical visor

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write ..

110.00 €

To order
 LfW private paratrooper pilot peaked cap

If you need additional photos of the product, write to us by email or in the messenger.The cap of a private or non-commissioned officer of the Luftwaffe (up to officer rank); the military branch is flight personnel (pilots, ground technicians) or paratroopers. A blue-gray cloth top, a black band of braided ribbon, yellow edging, a black strap made of artificial leather. The visor is also made of artificial leather, with a sheathed edge, black lacquer on top, dark green on the bottom.There's a leather band around the perimeter inside the cap, it has a perforation in front (to remove heat from the forehead), and on a brand of the manufacturer Anton Kreisel K.R.E.A.G.D.R.P u. D.R.G.M. on the side. Inside on the dome there is a celluloid detail to protect the top of the cap from head sweat. It..

100.00 €

In production
[on order] KM sailor cap

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by e..

112.00 €

To order
[on order] Komandor Admiral peaked cap

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by e..

110.00 €

To order
[on order] KM officer peaked cap

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by e..

110.00 €

To order
[on order] KM NCO peaked cap

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by e..

110.00 €

To order
[on order] Führer's party peaked cap

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write ..

110.00 €

To order
Toque balaclava pipe-scarf mouse gray

The woolen pipe to protect the throat and back of the head. Every German soldier during the Second World war had one. It stretches well, but does not sprawl, keeps shape. Warm, soft, better than a scarf, because it doesn't untie. Suitable for use outside the reenactment hobby, an indispensable thing for autumn and winter chilly weather. It may be placed even in a shirt pocket when folded.At the same time the toque may cover both the forehead and the neck, dropping on the shoulders. Weight 90 g. It has a seam.The side-cap is present on the photo to explain how to use the toque. The side-cap is not included in this product.The color is mouse gray (medium gray with a slight shade of green). The photo below shows a comparison of this shade with the general medium-gray color (we also make ..

12.00 €

In stock
Toque balaclava pipe-scarf olive-green

The woolen pipe to protect the throat and back of the head. Every German soldier during the Second World war had one. It stretches well, but does not sprawl, keeps shape. Warm, soft, better than a scarf, because it doesn't untie. Suitable for use outside the reenactment hobby, an indispensable thing for autumn and winter chilly weather. It may be placed even in a shirt pocket when folded.Color olive (green).Size 50х28 cm (in flat form). Therefore at the same time the toque covers both the forehead and the neck, dropping on the shoulders. Weight 90 g. It has a seam.The cap is present on the photo to explain how to use the toque. The cap is not included in this product...

12.00 €

In stock
Toque balaclava pipe-scarf gray

The woolen pipe to protect the throat and back of the head. Every German soldier during the Second World war had one. It stretches well, but does not sprawl, keeps shape. Warm, soft, better than a scarf, because it doesn't untie. Suitable for use outside the reenactment hobby, an indispensable thing for autumn and winter chilly weather. It may be placed even in a shirt pocket when folded.The size is 42×24 cm in a flat form.The color is ash gray. The photo below shows a comparison of this shade (on the left) with a gray and dark gray toques.At the same time the toque may cover both the forehead and the neck, dropping on the shoulders. Weight 90 g. It has a seam.The cap is present on the photo to explain how to use the toque. The cap is not included in this product...

12.00 €

In stock
Toque balaclava pipe-scarf dark-gray

The woolen pipe to protect the throat and back of the head. Every German soldier during the Second World war had one. It stretches well, but does not sprawl, keeps shape. Warm, soft, better than a scarf, because it doesn't untie. Suitable for use outside the reenactment hobby, an indispensable thing for autumn and winter chilly weather. It may be placed even in a shirt pocket when folded.The size is 42×24 cm in a flat form.This toque is made of dark gray colour wool. The photo below shows a comparison of this shade (on the right) with a general gray (in the middle) and ash-gray (the lightest).At the same time the toque may cover both the forehead and the neck, dropping on the shoulders. Weight 90 g. It has a seam.The cap is present on the photo to explain how to use the toque. The cap..

12.00 €

In stock
Toque balaclava pipe-scarf Feldgrau

The woolen pipe to protect the throat and back of the head. Every German soldier during the Second World war had one. It stretches well, but does not sprawl, keeps shape. Warm, soft, better than a scarf, because it doesn't untie. Suitable for use outside the reenactment hobby, an indispensable thing for autumn and winter chilly weather. It may be placed even in a shirt pocket when folded.Size 36х26 cm (in flat form). Weight 60 g. The toque has no seam, is sewn as a pipe, as originals were. Produced after the war for the NVA (DDR army).Color feldgrau (olive or greenish-gray). Since these balaclavas were produced for the German army in the postwar years, they laid in stock for a long time. Small fluctuations in color (fading) are acceptable and aren't rejects.We offer a choice of balacl..

12.00 €

In stock
Oakleaf camo helmet cover

Helmet cover in camouflage "Oakleaf", for Waffen-SS troops. Double-sided, invertible: green shades for summer and brown shades for autumn. It has loops for attaching branches and grass for camouflage, such began to be sewn to the covers since 1942. It is attached to the helmet with three metal hooks and a special pocket for the visor. Dense cotton fabric. Colors of camouflage are not bright.Suitable for helmets 64 and 66 (head 56...59), in the photo he is wearing a helmet 66. You can pull on a helmet 68...

20.00 €

In stock
Palmtree camo helmet cover

..

20.16 €

Will be later
Winter white helmet cover

A cover of white fabric for German helmets. It's suitable for any size of helmet...

12.00 €

In stock
Splinter camo helmet cover

Helmet cover in Splinter camouflage, for the ground forces (Heer) of the Wehrmacht. Bilateral; theoretically it can be turned inside out and used in winter, as the back of the fabric is white. The material is camouflage on one side and white on the other side (like original). We have different shades.Attached to the helmet with a drawstring. It fits all sizes of helmets, especially well on 66 and 68. In the photo, it is worn on a helmet 64.Cover produced by "Replika". Seams with a "lock", and not on an overlock (a seam with a lock is stronger, it was on covers and blouses, but modern manufacturers replace it with an overlock, which is easier and cheaper). The inside of the cover is white (some manufacturers use camouflage backing color fabric to reduce the cost and do not think about the i..

12.00 €

In stock
Marsh Swamp camo helmet cover

Helmet cover made by Replica. The smallest details on a seemingly simple object are observed. The seams are made with a “lock”, and not with an overlocker (a seam with a lock is stronger, this was used on covers and blouses, but modern manufacturers are replacing it with an overlocker, which is simpler and cheaper). The reverse side of the cover is white (some manufacturers use fabric in the color of the camouflage base to reduce the cost and do not think about the reverse side). The loops for camouflage are sewn taking into account the color of the camouflage, so that there is no light stripe on a dark spot (in the original they didn’t do this, but we love our work and made the covers a little better).We present one of the latest variants of the "Splinter" camouflage with the most blurry ..

13.00 €

In stock
Golden metallic cord strap for peaked cap

The golden cord was worn on generals' peaked caps of the Heer, the SS and the Luftwaffe (and other branches). The officers had silver cords.The cord is made of metal thread, it feels cold. Very good copy.Buttons (pins) are not included! Buttons are sold separately...

15.00 €

In stock
Aluminium liner to M35/40 German helmets

There is no size stamp on the rim on sizes 55, 56 (only an ink stamp on the leather). The brand of the manufacturer is on all the liners.A copy of the German liner. The sizes are accurate and the materials are carefully selected. Aluminum bands, 1.5 mm leather, beige or brown felt. On the sides of the band are size stamps (for example, 58/66 n. A., where 58 is the size of the head, and 66 is the size of the helmet). Size stamp is embossed on the inner rim also. The inner rim of the steel spring (Balaclava transition period of 1940, when often used parts made of aluminum and steel in the same product)! There is also the name of the manufacturer on the band (BERL. KOFFERFABRIK MAX DENSOW, a suitcase factory in Berlin is not the most popular, but one of the first manufacturers of these l..

50.00 €

In stock
Showing 1 to 100 of 759 (8 Pages)