Steel stakes for German Zeltbahn tents of post-war production. Without manufacturer's marks. All stakes have signs of corrosion to varying degrees. They differ from the original ones in that they have a slightly larger head, and the hole, on the contrary, is smaller. Suitable for use in reenactment.See the tab "Historical reference" on the history of this item and its variants. The tent set usually included 2 stakes, 1 part of the pole and a rope. Price for one stake. Comparison of the pre-war aluminum peg of the Wehrmacht (left) and the post-war steel one...
6.17 €
There are three types of eagles of the Waffenamt military acceptance ("waffen/amt": armaments department). Such eagles usually stood on the top of each "potato masher" M24 and on the M39 offensive grenades (shaped like an egg). Choose option 1, or 2 before purchasing. To see additional photos please follow the link.This product will allow you to get a high-quality image of the stamp (as if it were actually applied with paint) without special skills and a rubber stamp! We offer high-quality decals made specifically for our store. The sketches are based on the original images applied to German grenades. The drawings have the right proportions and perfect symmetry. The decals are printed on professional equipment.How do I install the decal?Step 1. Put the piece of paper with th..
0.95 €
This product will allow you to get a high-quality image of the stamp (as if it were actually applied with paint) without special skills and a rubber stamp!How do I install the decal?Step 1. Put the piece of paper with the image (as it is, nothing needs to be cut out) in warm water for 10-20 seconds. Place the decal on the surface (of the model or other object) and, holding the drawing with your finger, pull out the paper base from under it. Set the drawing flat by wetting it with water if it sticks. You can outline in advance with a pencil on the surface where the edges of the drawing should go. Then remove the water from under the drawing with a cloth or toilet paper, without moving the image.Step 2. Allow the decal to dry for at least 3 hours (preferably 5-6 hours). After that, use..
0.47 €
We offer quality decals made specially for our shop. Sketches are developed on the basis of original inscriptions on German grenades. The drawings have the correct proportions and perfect symmetry. Decals are printed on professional equipment.Decals for offensive grenades M24 — the inscription VOR GEBRAUCH SPRENGKAPSEL EINSETZEN (insert detonator before use) in two different fonts (options 1 and 2, respectively, you need to choose before purchase).Eagle WaA is offered as a separate item, it is not included in a decal set for the M24 grenade!How do I install the decal?Step 1. Put the piece of paper with the image (as it is, nothing needs to be cut out) in warm water for 10-20 seconds. Place the decal on the surface (of the model or other object) and, holding the drawing with your finge..
3.32 €
We offer quality decals made specially for our shop. Sketches are developed on the basis of original inscriptions on German grenades. The drawings have the correct proportions and perfect symmetry. Decals are printed on professional equipment.Decal for smoke grenade M24/39 — the inscription Nb.H.Gr.39 (smoke hand grenade 39) with a white stripe on the body and the manufacturer's marking.Eagle WaA is offered as a separate item, it is not included in a decal set for the M24 grenade!Together with each decal there is a strip-tester about 3x1 cm in size. In composition, it is exactly the same as the decal and is painted in all the main colors of the decal. Using it, try to work with the decal, see how the decal will sit on your surface, how it will look after drying. Try baking, the effect..
3.80 €
Aluminum ID disk (dog-tag) of German soldier of World War II — Erkennungsmarke. Quality copy. Size 5x7 cm.We don't write on dog-tags...
5.70 €
Steel ID disk (dog-tag) of German soldier of World War II — Erkennungsmarke. High quality copy. Do not rust. Size 5x7 cm.We don't write on dog-tags...
7.60 €
Steel ID disk (dog-tag) of German soldier of World War II — Erkennungsmarke. High quality copy. Size 5x7 cm.We don't write on dog-tags...
5.70 €
A good copy of the German fat jar. Cast from orange plastic (resin), like the original. We offer different material colors: orange (the most common at the beginning of the war), brown, black (also found) and light green (often encountered at the end of the war). Select the color next to the Add to cart button. If a color isn't there, it's sold out.Stored in a bread bag, the jar usually contained a butter or margarine (a part of a dry ration)...
33.25 €
Copy of VASENOL foot powder from WWII. The packaging is made of 2 mm sleeve cardboard, the label is made of coated cardboard (water and scratch resistant). Strong packaging will withstand all the tests of active use in the reenactment of soldier's life, it will not wrinkle in a bread bag. The original packaging of such powder was also made of cardboard or tin.Inside is a foot powder of modern production, which can be used for its intended purpose.Price for 1 pack of foot powder. Other items in the photo are shown to show the real shades and the size of the package...
19.95 €
Copy of Schweiss foot powder from World War II. Packaging in the form of a paper bag. Inside is foot powder of modern production, which can be used for its intended purpose. Weight 100 grams.Price for 1 pack of foot powder. Other items in the photo are shown to compare the real shades and the size of the package...
4.75 €
A handkerchief about 30-40 cm in size made of cotton material. It was produced for the army at the end of the twentieth century, however, it was used in all countries, both military and civilian. The pattern is woven along with the handkerchief. The scarves are new.No color selection! The scarves are all different, there are no 2 identical ones, whichever one you come across will be the same. If you need a scarf of a certain color, write about it in the comments to the order, we will try to find it...
0.95 €
Price for 1 mirror. Only the Franz Blume advertising mirror is for sale, the other mirrors in the photo are examples of what mirrors with other advertising might look like and for color comparison. You can also buy these mirrors in our online shop.The copy of a pocket mirror from the first half of the 20th century. The reverse side shows an advertisement for uniform tailor Franz Blume from Landshut, Bavaria. Diameter 56 mm.Pocket mirrors with advertisements of various brands were very common in the 20-30s of the XX century. This small detail will perfectly complement the image of a military historical reenactor and help create a unique atmosphere of the Second World War...
8.55 €
Price for 1 mirror. Only the Hückel advertising mirror is for sale, the other mirrors in the photo are examples of what mirrors with other advertising might look like and for color comparison. You can also buy these mirrors in our online shop.The copy of a pocket mirror from the first half of the 20th century. The reverse side shows gentlemen wearing Hückel hats, an advertisement for Paul Klüver's hat shop in Berlin. Diameter 56 mm.Pocket mirrors with advertisements of various brands were very common in the 20-30s of the XX century. This small detail will perfectly complement the image of a military historical reenactor and help create a unique atmosphere of the Second World War...
8.55 €
A copy of a pocket mirror in the form in which it was sold at the barracks of the German army for German soldiers. Rectangular mirror 5x7 cm with the inscription "Vorsicht bei Gesprächen. Feind hört mit!" (Be careful when talking! The enemy is overhearing!). Mirror in a cardboard cover-envelope, which saves from dirt and scratches. On the package is printed "Ein kleiner Dank des Führers an seine Soldaten" (Little thanks of the Führer to his soldiers), as well as a national emblem — a pressed outeagle with a swastika...
7.60 €
A copy of the sewing kit of the German army during the Second World war. Made of thick green fabric, fastens with a button. On the cover the inscription Kameradenhilfe ("kameraden/Hilfe" — friendly help). It weights just 50 gramms.Contains:needle set (Nadelsortiment) and a large needle for darning socks;Set of threads of different colors in authentic flat windings with inscriptions;3 types of buttons (for field clothes and underwear);scissors.The necessary thing, as Germans say "muss sein" (must have, literally "must be").The color of the pouch and the components of the set (threads, buttons) may differ from the photo, remaining within the historical correspondence; different batches = different colors. You can always ask for a photo of your future set by contacting us in any way...
33.25 €
Matches are not included. You are buying an authentic veneer box. Matches are available in any country and have not changed since those times. Matches are prohibited for shipment as a flammable cargo.The boxes are assembled and pasted over the original ones and are intended for use in reenactment.Dimensions 50x35x16 mm, about 50 matches in the box. Ignition strip on both sides.Price for 1 box. ..
4.75 €
The product kit includes 3 sachets for condoms and a cardboard box.Condoms themselves are not supplied for hygiene reasons. Condoms at that time looked the same as now.All packaging is copied from the original and printed by typography. For use in the reenactment and for the collection, decoration of military historical stands.Vulkan condoms from the Sanex brand. The box reads: Diese Packung, deren Inhalt die hochwertigen Qualitötseigenschaften der bestbekannten VULKAN-SANEX - ARTIKEL aufweist, darf nur Angehörige von Formationen der Wehrmacht zu einem billigeren Preise abgegeben werden. Die Weiterdieser Packung an andere Personen ist unzulässig. Which means: This package, which contains high-quality and well-known VULKAN-SANEX-PRODUCTS can only be issued at a cheaper price to military per..
4.75 €
The product kit includes 3 sachets for condoms and a cardboard box.Condoms themselves are not supplied for hygiene reasons. Condoms at that time looked the same as now.All packaging is copied from the original and printed by typography. For use in the reenactment and for the collection, decoration of military historical stands.The package is labeled Doppelt geprüft (double checked), SONDERPACKUNG (special packaging) and 3 Jahre Lagerfähig (3 years of stock storage is possible). The box also contains the manufacturer's name Otto Dillnger G. m. b. H., Leipzig.On the back of the box is the following text: Achtung! Alle unter dem Namen Odilei in den Handel gebrachten Gummiwaren sind erstklassig warm vulkanislert und jahrelang lagerfähig. Verlangen Sie deshalb beim Einkauf ausdrücklich O d i l ..
4.75 €
T-shaped dismountable metal shaver in the Rotbart box (translated from German as “red beard”) with a Be-Be blade in the company wrapping. All items are quality copies. Shaver is without inscriptions. Size of the shaver 4х7 cm. On the blades is the authentic seal of the manufacturer, it is not washed off and is not erased...
10.77 €
Blade "Be-Be" in the company packaging. High-quality copy. There is the seal of the manufacturer on the blade, it is not washed off and is not erased...
1.80 €
Original wax candle for use in reenactment and for a collection. The base is made of cardboard, the wick is made of cord. The size is approximately 7x2 cm...
3.13 €
Case made of high-quality leather for a standard shaver. It fits the shaver, which is sold by us (size 4x7 cm). It has a reliable and convenient press-button fastener.The image of the razor and other items in the photo shows what the case with the razor looks like and the dimensions of the case relative to other items. The razor is not included, the price is for the leather case only...
23.75 €
Traditional crispbread "Knäckebrot" were part of the emergency food ration, which the Wehrmacht soldiers had to keep with them.Our brittle bread "Knäckebrot" is a modern similar product in a copy of the historical packaging. The packaging indicates the weight of the loaves is 125 gr. and factory data Batscheider Knäckebrotfabrik, F. Lieken & Batscheider, München 23, Biederstein 7. Inside the pack are authentic modern factory-made crispbread, and they can be eaten.Price for 1 pack of Knäckebrot . Other items that can be seen in the photos are given for understanding the color and size of the product, are not included in the price of this product, but are sold as separate products on our website.Limitation of seller’s liability.The ration consists of real edible products of industrial (w..
5.70 €
A copy of Nescafe instant coffee can. The label is copied from the original, released for the German market in the early 1940s. Cans with this label were used by soldiers at the front and civilians in the rear during the Second World War. Volume is 230 ml. The size is approximately 8×8×8 cm.There are inscriptions on the jar and lid: "pure coffee bean extract in powder form" (Reinen bohnenkaffee-extrakt in pulverform) and instructions for use.The Nescafe can is suitable for preserving small items from dampness and crumpling in the field, for storing tobacco, as well as for its intended purpose — for coffee (which is still produced under the same brand and is available in stores).The jar is sold empty...
9.02 €
A copy of the sugar jar of the Dutch company Wester. Sugar of this company (as well as most goods from the market of the allies of Germany or the occupied territories) was supplied to the Reich and for the needs of the army during the war. A volume of 250 ml. The size is approximately 10×10×10.On the jar is the inscription: "guaranteed free of glucose and any other impurities" (Gegarandeerd vrij van glucose en van ieder ander bijmengen). And also the name of the factory Wester Suikerraffinaderij Amsterdam (sugar factory Wester, Amsterdam).The jar is suitable for preserving small items from dampness and crumpling in the field, for storing tobacco, as well as for its intended purpose — for sugar. Now you can have it during an event in sufficient quantities, without worrying about the authent..
9.02 €
A replica of a coffee can from the American company Foltz tea & coffee CO. Coffee of this company (as well as most goods from the market of the allies of Germany or the occupied territories) was supplied to the Reich and for the needs of the army during the war. Volume is 230 ml. The size is approximately 8×8×8 cm.On one side of the can there is an inscription: "We guarantee to the purchaser, if after using the contents of the can you are not satisfied in every respect. Your grocer will refund the money you paod for it". On the other side of the can is the inscription: "Zodiac coupons are valuable. Redeemable for premiums. Combine with Golden Key or J.B. Сoffee or Zodiac Tea Coupons. Premium catalog statee where prelibited". And also the name of the manufacturing company FOLTZ TEA..
9.02 €
Pea concentrate of modern production in a copy of the historical packaging from the Second World War. Suitable for making soup in field conditions during the reenactment of the ordinary life of Wehrmacht soldiers.The package contains 1 briquette weighing 200 grams. This briquette is enough to prepare a bowl of soup on a hike or tactical event.Cooking method:Break up one briquette.Pour it with cold water in a volume of 1.4 liters and mix thoroughly.Bring to a boil, then cook for 15-20 minutes, stirring occasionally.Warm soup is ready!Price for 1 pack. Other items that can be seen in the photos are given for understanding the color and size of the product, are not included in the price of this product, but are sold as separate products on our website.Limitation of seller’s liability.The..
6.65 €
A copy of a Maggi's bouillon cubes can, produced in the early 1940s in the city of Poznan. Cans with this label were used by soldiers at the front and civilians in the rear during the Second World War. Volume is 230 ml. The size is approximately 8×8×8 cm.On the jar and lid are inscriptions: "always close the jar tightly" (Büchse stets gut verschließen) and "contents: 100 cubes" (Inhalt: 100 Würfel).The Maggi jar is suitable for preserving small items from dampness and crumpling in the field, for storing tobacco, as well as for its intended purpose — with bouillon cubes (which are still produced under the same brand and are available in stores).The jar is sold empty...
9.02 €
Instant drink (dry juice) "Jupo" in a flat cardboard package. Inside is a powder that, when dissolved in a glass of water (about 1/4 liter), gives a refreshing red drink with a raspberry flavor.Price for 1 pack.Limitation of seller’s liability.The ration consists of real edible products of industrial production (with the replacement of factory packaging for historical). All components were packaged usable (within the expiration date). The expiration dates on the historical packaging (if any) are given in terms of historical compliance, and have nothing to do with the actual expiration dates of the products inside. You need to understand that this rations is primarily a game element, props, and only then a set that can be used for its intended purpose. Also, other products for reenactment, ..
2.85 €
Copy of Kosa chocolate bar (Speise, Halbsusse — nutritious, semi-sweet), Schokoladenfabrik Rolle K.-G. For use in the reenactment of the Heer, SS, Luftwaffe and simply as a souvenir "an edible gift from the past."Inside is a 100-gram bar of high-quality chocolate of modern production. The tile does not contain any inscriptions and looks absolutely appropriate. The factory foil packaging is not broken, so as not to come into contact with the tile surface when repackaged in a historical wrapper. The authentic label is printed on paper of the "correct" color and texture.The cover depicts a dark-skinned girl and a cocoa bean (the fruit of the tree from which chocolate is made)...
2.85 €
A 60-gram bar of quality milk chocolate is used in this copy of Manner chocolade. We do not break the factory foil packaging, so as not to contact the surface of the chocolade. The bar itself does not contain any inscriptions, and will look absolutely appropriate at any event. Chocolate is packed in the authentic printed paper of the "right" color and texture.Price for 1 bar.Limitation of seller’s liability.The ration contains real edible chocolate of industrial production (with the replacement of factory packaging for historical) or piece (home). All components were packaged usable (within the expiration date). The expiration dates on the historical packaging (if any) are given in terms of historical compliance, and have nothing to do with the actual expiration dates of the products insid..
3.51 €
The cigarette rolling machine is small and fits easily in your pocket or bag. It is about 8 cm long. Taking with you a cigarette rolling machine, cigarette paper, tobacco pouch and cigarette filters, you can enjoy your favorite tobacco at any time of the day, anywhere. But remember, smoking is harmful to health and prohibited for minors!How to use?The cigarette rolling machine is quite simple. You need to spread the rollers. Put and distribute your favorite tobacco in the space between the rollers, along the length, having previously fluffed it; if desired, you can put a cigarette filter. Then scroll the rollers to remove the excess, ram the tobacco and give it the shape of a cigarette. After that, insert the cigarette leaf into the small gap between the rollers with the sti..
41.80 €
Brush with a transparent plastic handle and natural bristles. The color of the pen can be orange, pink, but always transparent. Original, post-war production. Suitable for the German and Soviet army WW2 reenactment.The price is for 1 brush, other items in the photo are shown to improve the illustration.There may be a recommended price marking in golden letters on the brush handle. This is not a defect or a reason for a discount. If you don't like it (for example, for the reenactment of the Heer), it can be erased with acetone or No. 646 solvent, nail wash, or wiped with a fine sandpaper; then polished with felt or wool cloth...
5.70 €
Copy of Doramad toothpaste. The toothpaste was produced by the Auergesellschaft industrial firm from the 1920s through the Second World War.In general, Auer had research activities of rare earth elements and radioactivity and produced, for example, gas masks. The company used thorium and rare earth elements in the manufacture of, in particular, "incandescent gas mantles" (Glühstrumpf - a kind of lantern in the form of a stocking from a special material that gives light when heated with a gas flame), and the toothpaste was made as a by-product.The toothpaste contained a small amount of thorium and was radioactive. Its action was promoted as beneficial to health, including an antibacterial effect. Of course, it was patented.There's a real toothpaste tube inside the cardboard box, but without..
14.25 €
Copy of Chlorodont toothpaste. The toothpaste was produced from 1917 by company Leowerken. In 1924, Chlorodont was the leading brand in the European market. The toothpaste was also produced by World War II until the early 1980s. The lost rights to the brand Chlorodont tries the company Dental Cosmetics GmbH & Co. KG...The name Chlorodont comes from the developer Ottomar Heinsius and is derived from the words chloros (Greek "green") as a symbol of freshness (and the peppermint flavor) and odon (Greek "tooth").Chlorodont consisted of pumice powder, calcium carbonate, soap, glycerine, potassium chlorate and was flavored with peppermint.By purchasing this product, you get a tube of mint-flavored toothpaste (standard factory production), packaged in a cardboard box with a paper booklet insi..
11.40 €
Coffee ration, long-life coffee in a tube. Germans drink coffee often. Therefore, various types of coffee were always in the soldier's ration or were purchased by him independently. In this case, it is canned coffee for adding to boiling water in the field.It has an inscription that was also supposed to warm the heart of a soldier torn from his homeland: Nach frau Anna Holsing, Bremen-Katrepel, which translates as "from Frau Anna Holsing, Bremen-Katrepel" (Katrepel is the outskirts of the city of Bremen).It is also written: Mokka mit Kondensmilch und Traubenzucker, Coffeingehalt ca. 0.1 g, which means "Mocha (a type of coffee) with condensed milk and grape sugar, the caffeine content is about 0.1 g.The ration allows you to diversify your life during reenactment and is suitable for an exhib..
6.65 €
Metal burner, advertising leaflet and fuel tablets are not included in the set! You only buy 2 cardboard packages.A set of cardboard packaging for the Esbit burner and fuel. The set includes 2 cardboard boxes (for the burner and fuel tablets, respectively). Cartons — a modern copy, made in a print shop. The kit does not contain a burner and fuel inside! It is used for completing the exposition of household items of a German soldier, as well as in reenactment events.The size of the burner for which the package is made, 10×7.5×2 (standard model).Esbit is the brand name for urotropine tablets (hexamethylenetetramine). The substance itself was discovered in 1859 by Alexander Mikhailovich Butlerov, and the Swabian (German) inventor and businessman Erich Schumm came up with it as a dry fuel. He ..
12.35 €
Roll of toilet paper "zervus" (Servus) — a copy. The word "servus" in European countries is an analogue of the English word "hi" or Italian "chao" (in the sense of greeting and farewell). The producer of this paper, Feldmühle (means "field mill" in German), began its activities in August 1885 in place of a monastery mill built by Cistercian monks in the 13th century. Fully the company was called "Silesian factory for the production of sulphite-cellulose products Feldmühle". The company successfully developed and grew for exactly 100 years, and in 1985 the owner of this and other companies of the Flick group sold the entire group for five billion German marks. In 1991, the factory was closed, and its assets were divided between other industries. Source: de.wikipedia.orgThis p..
1.42 €
Roll of toilet paper "Edelweiss" — a copy of the famous original. Packaging for use in the Wehrmacht (inscription Wehrmacht-Packung), the brand "Edelweiss". The label also says that it is "chemically pure toilet paper" (chemish reines Klosettpapier). At the top of the label are advertising slogans: hygienic, profitable (hygienisch, vorteilhaft). There is a small image of a German eagle with a swastika.A unique product! Hurry up to buy...
3.80 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Hygienic kit for the SS soldier of the Second World War reenactment. All items can be used for its intended purpose. The set is packed in the box 23х15 cm for parcels to the front (a copy) with the inscription Feldpost and postage seals. The kit include..
38.00 €
The price is for 1 folding burner in an authentic box + 1 box of dry fuel.The burner is a copy of the original German Wehrmacht burner, but without the inscription Esbit. Packaging for the Wehrmacht (there was also a civilian model).The fuel is in round-shaped tablets. There are 4 tablets inside the cardboard box. Tablets are hygroscopic (absorb moisture), so they should be stored in a dry place.Esbit is the brand name for urotropine tablets (hexamethylenetetramine). The substance itself was discovered in 1859 by Alexander Mikhailovich Butlerov, and the Swabian (German) inventor and businessman Erich Schumm came up with it as a dry fuel. He founded "Schumm" firm in 1933 and introduced dry fuel to the market under the name "Esbit" by 1936. The word Esbit is an abbreviation for the phrase "E..
19.00 €
Fuel in rectangular shaped tablets for burners "Esbit" — a copy. 10 tablets of the correct rectangular shape packed in cellophane are inside the cardboard box. The tablets are hygroscopic (absorb moisture), so they should be stored in a dry and tightly packed form. The fuel burns smokelessly, releasing a large amount of energy, leaving no ash after combustion. There is no advertising insert. The discounted set has only one drawback: on the front of the box there is a small dent 2 cm long.Price for 1 box with fuel, the photo shows 2 boxes for better information.Esbit is the brand name for urotropine tablets (hexamethylenetetramine). The substance itself was discovered in 1859 by Alexander Mikhailovich Butlerov, and the Swabian (German) inventor and businessman Erich Schumm came up with..
14.25 €
Theo Morel was Hitler's personal doctor, who had a reputation as a charlatan among medical scientists. They said, he invented questionable medicines (and earned money). Among his inventions is a powder against lice called Russla (presumably from the German words of Russland + Läuse, "the Russian lice"). In the Wehrmacht, the powder was distributed, but was considered ineffective, therefore during the excavation of German long-term positions (for example, in the Kaluga region of Russia) it is often found in whole packages in scrap-heap holes. The powder has a strong, not pleasant smell.Original powder packaging. Photo from broneboy.ruThe product was manufactured by Milo-Werke, founded in 1942 in Olomutz (now Olomouc in the Czech Republic). The company used the material base of the MILO..
4.75 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Battery Diamon 4,5 Volt. The label accurately reproduces the original. It was used in Soviet pocket flashlights, radios, etc., household and military electronics items.The battery can be used for its intended purpose, it is a new battery.We of..
6.65 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Battery Pick 4,5 Volt. The label accurately reproduces the original. It was used in Soviet pocket flashlights, radios, etc., household and military electronics items.There is an inscription on the front and back of the battery "Luftsauerstoff-..
6.65 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Battery Syrius 4,5 Volt. The label accurately reproduces the original. It was used in Soviet pocket flashlights, radios, etc., household and military electronics items.The battery can be used for its intended purpose, it is a new battery.There..
6.65 €
A copy of the brown bakelite travel soap packaging. On the lid is the inscription Siefe (German: soap). A small box (about 9 = 5 = 3 cm), a small piece of soap will fit into it (a standard modern piece will not fit).A good copy and an excellent entourage!..
33.25 €
Our wire net copies original samples and is suitable for reenactment. It fits any helmet. To install it, you need to bend all hooks over the rim of the helmet, and then pull and twist the central wire with pliers, shaping the net. Paint can get scratched, yes. The original helmets were also scratched under the wire net.The net is made of baked (soft) wire 1.5 millimeters thick.The helmet is shown for the illustration of the installed wire net, the helmet is not included in the price of the net. We do not install nets, we only sell nets...
23.75 €
Wooden handle for dummy-grenade restoration. Made on a machine-tool from a whole piece of beech. This wooden part is for German smoke grenade M24-type or smoke grenade 39 (Nebelhandgranate 39). This handle has ribs on lower end to differ it by touch from a fighting grenade in darkness...
4.75 €
Wooden handle for dummy-grenade restoration. Made on a machine-tool from a whole piece of beech. This wooden part is for German offensive grenade M24 (Stielhandgranate 24)...
4.75 €
Wooden handles for grenades. Made on a machine-tool from a whole piece of beech. We have (not always):• Ball-end stick. Has a bore inside and apperture for a cord in the end. Total lenght is about 25 cm.• Cap-end stick. Has a bore inside. Total lenght 25.5 cm, lenght of wooden part after installation 22.5 cm.You can choose a handle for purchasing if only it's in stock now...
4.75 €
Wooden handle for making dummy grenades (for demonstration purposes and reenactment games). Model for the Finnish grenade Varsikranaatti M32 / M41. Cut on the machine tool from a single piece of birch. The total length is 20.3 cm, the length of the visible part (after installation) is 17 cm...
6.65 €
Wooden shaft, handle for German WW2 sapper ax. This wood can be also used for other models of axes. It has a convenient tip shape. Made on a machine-tool from a whole piece of beech. Length 36,5 сm.Price for a wooden haft only...
18.05 €
Wooden shaft, handle for German WW2 straight spade. This wood can be used for the most majority of European entrenching tools of the XX century. The shank made on a machine-tool from a whole piece of beech. Lenght 40 сm.Price for a wooden haft. Other items in the photo are for illustration only...
4.75 €
Wooden shaft, handle for German WW2 foldable spade. This wood can be also used for other models of sapper shovels; it has a convenient tip shape. Made on a machine-tool from a whole piece of beech. Lenght 42 сm.Price for a wooden haft. Other items in the photo are for illustration only...
4.75 €
Wooden shaft, handle for Soviet and Russian straight spade (pre-WW2 with "lips"). This wood can be used for the most majority of European entrenching tools of the XX century, also for WW1. The shank made on a machine-tool from a whole piece of beech. Lenght 34 сm.Price for a wooden haft. Other items in the photo are for illustration only...
3.80 €
Wooden shaft, handle for Soviet Army straight spade (pre-WW2 with "lips"). This wood still used for Russian entrenching shovels and until now. The shank made on a machine-tool from a whole piece of beech. Lenght 42 сm.The shovel in the photos is for illustration. A shovel is not for sale, this item is only the haft...
3.35 €
Red rubber gasket for the lid of the German field bottle. Made in an industrial way, absolutely smooth edges.There were often red (pink, orange) gaskets in the field bottles of the first half of the XX century. The red gasket is a must-have part for a German field bottle. Unfortunately, original rubber parts are already dried and stiffened. Our gasket is new and elastic, looks like original, it will perfectly replace the old rubber for use in reenactment or collection.Price for 1 gasket, cover for flask not included...
1.20 €
The cap on a German field bottle from the Luftwaffe survival kit. The cap fits the carving of an ordinary flask, but it looks different from the outside. Typically, flasks with reinforced lids were used for gasoline, painted bright yellow and signed Benzin Feuergefährlich.The original! It's a very rare thing. The original field bottle in the bag (a photo from the Second World War) and the sample preserved to this day (the paint has most likely been restored). Photos from the website gmic.co.uk and themilitaryman.co.uk...
28.50 €
The lid/cap on the German flask model 1931 (and the like) aluminum.Gorgeous copy, which is difficult to distinguish from the original, especially if stamped. The lid is without stamps. The lid is completed with a rubber gasket. The peg is not installed in the lid, but attached to it. It needs to be riveted after installing the cap on the flask strap.Price per set: cover + red rubber gasket + peg (rivet). How to install the peg in the cover?The pegs were installed into the bakelite caps with 1 mm margin, and were fixed by a blow. From the blow, the peg expanded and fixed itself. At home, you can fix the peg with epoxy resin (epoxy glue) — this is reliable, safe method and it will give 100% tightness to the cap.Caps from our "Replika" shop, pegs are inserted but not fastened. All peg..
11.40 €
The lid for the German flask model 1931 of black synthetic resin (copy).The appearance of resin lids was obviously connected with the reform of 1940, when a number of simplifications were made in the uniform and equipment of the German army. Such caps have been installed 1940-1941 (some 1942) by flask manufacturers marked MN (Metallindustrie GmbH. Neunkirchen-Saar (MENESA)), W.A.L. (Westfalische Aluminum Industrie, Junger & Co., Lüdenscheid), H.R.E., M.K.L., S.S.L., ESB and other. Such caps are very often found with in veneer (they are also not quite rightly called "bakelite"), which were used by the German African Corps (DAK), but not only there.The cap has the same design as the earlier aluminum caps. In 1940, the Germans essentially made a copy of the aluminum cover from a chea..
7.12 €
Price per lid: without gasket and peg. All add-ons are sold separately from us!The lid for the German flask model 1931 of black synthetic resin (copy).The appearance of resin lids was obviously connected with the reform of 1940, when a number of simplifications were made in the uniform and equipment of the German army. And this model has been dating since 1942. Probably, the Germans changed the design to a simpler (in terms of manufacturing) and more comfortable (with large ribs).How to install the peg in the cover?The pegs were installed nip and tuck into the bakelite caps, and were fixed by a blow to the center of the peg (with a pointed metal “finger” like a nail). From the blow, the peg expanded and fixed itself. It should be understood that the impact force was calculated and tes..
6.65 €
The peg with a long tip (the part that is inserted into the cover) is intended for bakelite caps. These have thicker top than aluminum caps. In any case, measure the thickness of the top side of your cap before buying the peg.Material — aluminum. The length of the tip is 4 mm, the diameter of the tip is 4 mm, the total length is 13 mm, the diameter of the middle part (on which the strap is put on) is 5 mm.Price for 1 peg.How to install the peg in the cover?The pegs were installed into the bakelite caps with 1 mm margin, and were fixed by a blow. From the blow, the peg expanded and fixed itself. At home, you can fix the peg with epoxy resin (epoxy glue) — this is reliable, safe method and it will give 100% tightness to the cap.Caps from our "Replika" shop, pegs are inserted but no..
3.51 €
The peg with a long tip (the part that is inserted into the cover) is intended for bakelite caps. These have thicker top than aluminum caps. In any case, measure the thickness of the top side of your cap before buying the peg.Material — aluminum. The length of the tip is 8 mm, the diameter of the tip is 4 mm, the total length is 17 mm, the diameter of the middle part (on which the strap is put on) is 5 mm.Price for 1 peg.How to install the peg in the cover?The pegs were installed nip and tuck into the bakelite caps, and were fixed by a blow to the center of the peg (with a pointed metal “finger” like a nail). From the blow, the peg expanded and fixed itself. It should be understood that the impact force was calculated and tested in advance before the production of caps. But when you w..
3.51 €
Precise and high-quality replica of stud for woolen cover of German field bottle (M31 canteen). The set includes a peg and a washer. You may need a special support for the stud during riveting, otherwise you may bend the stud.We offer a peg and washer made of different materials:- aluminum, with an aluminum washer (these were produced before 1940),- steel, with a steel washer (after 1940).Before ordering, you need to select the option (material). If an option is not available for selection, it means that it has already been sold...
3.99 €
Replica of 12 mm press-buttons for German equipment of the first half of XX century. Nice deep "star" design on exterior part, made of golden metal like originals, exterior detail painted black. Interior part has inconspicuous star marking (***), no modern inscriptions like "super star", "strong" or "xiao myao"!We sell press-buttons per 1 piece. Each piece consist of 4 parts. Press-buttons are usually installed by a standart hand-device (or you can bring them to a local workshop). You can install them by yourself using a nail and a hammer but you should know how to install press-buttons in theory and try usual cheaper press-buttons first.The color of the press-buttons is brass (golden). German buttons until 1940 were made of brass and glittered like new cartridges. Over time, th..
1.42 €
Cast aluminum hook for German field-bottles 1931-1940 (later they used steel hooks). It is a copy (cast) of the oLc model. The metal is softer than the original ones, but it holds the flask well...
7.60 €
The hook is coated semi-gloss grey paint, as was common for German steel strap parts...
6.65 €
Hook for hanging a German medical field bottle with a volume of 1 or 1.5 liters. Sometimes it was used as a rear hook of an infantry Y-belt, but it is not canonical to use it this way.A spare part for repairing or sewing leather equipment. Original (made in Germany in the 1940s), aluminum material.Rivets can be riveted on the hook or missing. We recommend that you also buy suitable rivets with a rod diameter of 4 mm and a length of at least 5 mm.We also sell buckles, pegs, a lid and everything else so that you can assemble a set of such straps.Price for 1 hook...
9.50 €
Attention! The spring is already bent at 45 degrees so that it can be easily inserted into the hook. This eliminates the risk of spring breakage during installation.Spring steel 0.2 mm thick and 7 mm wide for repairing original hooks to German flasks. The part is cut on the machine.There are two ways to insert the spring. The easiest way is to gently squeeze the spring and insert it from behind (from the side of the hook ring). Or you can disassemble the hook and reassemble it with the spring...
1.42 €
A buckle for the field bottle strap, gaiters (Gamaschen) and other equipment. Not painted. The size of the inner rectangle (opening) is 16,5×11 mm, designed for a 15 mm strap. The outside size is 23×18 mm. Such buckles were produced in the Third Reich of different sizes for different equipment.We offer buckles made of aluminum...
2.85 €
A neat replica of the 18 mm buckle for German equipment. It was used as part of an assault pack, for tropical hunters, late (after 1943) bowler straps, on gaiters of mountain rangers (type with ties and buckles as adopted in Styria, in the land in southeastern Austria). Buckles in grey paint. The stigma of v.H&Co. The dimensions are approximately 2x3 cm, the width of the opening is 19 mm (under the sling 18 mm). It fits the strap of a field bottle, but is not suitable for equipment (a similar larger buckle was used there). The price is for 1 piece...
6.65 €
The grommet is aluminum for attaching the lid of a German field bottle to a strap. The lid was fastened with a peg through the grommet, which allowed it to rotate (unscrew). Aluminum grommets were used, which cannot be found on the market (usually such small grommets are made of brass or steel).It is also suitable for a sling tip for tropical strap on a coconut-type flask and other flasks of the Africa Korps.It is easy to install. It is enough to insert it into the hole, expand it slightly and finally roll it out (manually with a hammer, using a standard grommet installer or without it). Use masking tape to protect the paint during installation. The result is a neat tip that appears to be factory-installed on the press! The price is for 1 grommet. The grommet is sold with a washer. Th..
0.95 €
A sling tip for tropical gear. It is designed specifically for the "narrow" 16 mm strap for "coconut" field bottles and others canteens of the Afrika Korps. It was also used on the "Styrian" gaiters of the mountain troops. It is an extremely rare item, but it is not found anywhere else in good quality. It has a LUX stamp.It is very easy to install. It is enough just to insert the sling inside and clamp it. To make it easier, you can slightly loosen the tip with pliers. Use masking tape to protect the paint during installation. The result is a neat tip that appears to be factory-installed on the press! Whereas decompressed semi-finished products can never be installed beautifully without special equipment.The price is for 1 tip...
3.32 €
A sling tip for tropical gear. It is designed specifically for the "narrow" 16 mm strap for "coconut" field bottles and others canteens of the Afrika Korps. It was also used on the "Styrian" gaiters of the mountain troops. It is an extremely rare item, but it is not found anywhere else in good quality. It has a LUX stamp.It is very easy to install. It is enough just to insert the sling inside and clamp it. To make it easier, you can slightly loosen the tip with pliers. Use masking tape to protect the paint during installation. The result is a neat tip that appears to be factory-installed on the press! Whereas decompressed semi-finished products can never be installed beautifully without special equipment.The price is for 1 tip...
3.32 €
Leather strap: width 15 mm, thickness 2.5 mm. The top is painted black. The bottom is cut off qualitatively (smooth rough surface). Natural color.Sold in pieces approximately 0.9-1.1 meters long. For 1 flask strap you need about 1.3 m + loops for the case, if necessary, that is 2 pieces or 2 units of goods...
1.90 €
Price for 10 cm, can be cut to any length. 1 meter = 10 items. For a "coconut" field bottle you need 16 units of this item (160 cm).Wholesale price from 24 m (240 units).Cotton strap for sand-colored equipment, 16 mm wide (the Germans used 16 mm and 18 mm for different types of equipment). Unique and rare item, not sold anywhere else. In different countries you can get different options, but most often they are wider and dark olive in color.The strap is dense, 1.5 mm thick.This strap can be used to make copies and repair a wide range of equipment, for example:German field bottle "coconut" and tropical flasks in a case. As you can see in the photo, straps of various widths were used.Photo from fjm44.com. More photos on the site fjm44.com.Pouches of different types, for e..
0.33 €
Original aluminum buckle for the field bottle strap, gaiters (Gamaschen) and other equipment. Not painted. The size is 27×21 mm, the width on the inside is 20-21 mm. Designed for straps with a width of 18-19 mm. Such buckles were produced in the Third Reich of different sizes for different equipment...
3.32 €
A neat replica of the 18 mm buckle for German equipment. It was used as part of an assault pack, for tropical hunters, late (after 1943) bowler straps, on gaiters of mountain rangers (type with ties and buckles as adopted in Styria, in the land in southeastern Austria). Buckles in grey paint. The stigma of v.H&Co. The dimensions are approximately 2x3 cm, the width of the opening is 19 mm (under the sling 18 mm). It is not suitable for the strap of the field bottle (another smaller buckle was used there). The price is for 1 piece.Before ordering, you need to choose an option. If an option is not available for selection, it means that it has already been sold.Grade 2 has minor flaws, mainly minor rust from storage, which is removed in 15 minutes in a special neutralizer liquid. Ther..
4.75 €
The original buckle for equipment made of a sling. Dimensions about 2х3 mm, opening width 19 mm (for the band 18 mm). Before installation on the equipment, it was usually painted with light gray enamel.It is suitable for tropical or late-war outings (straps for rolling up a Zeltbahn, for the mess-tin), for backpacks and bags. It is not suitable for the field bottle strap (another smaller buckle was used there, it is almost impossible to find it separately).Price for 1 pc...
5.70 €
The items in the photo (finished straps and metal parts) are shown to show the real shades and the size of the strap. We offer only a cut of the strap of the chosen length.Price for 10 cm, can be cut to any length. 1 meter = 10 items. Discounts for wholesale from 24 m.Cotton strap for sand-colored equipment, 18 mm wide (the Germans also used 16 mm and 20 mm). Unique and rare item, not sold anywhere else. In different countries you can get different options, but most often they are wider and dark olive in color.This strap can be used in German equipment: for late straps for equipment, for field bottles, for hanging bayonet-knives and fasteners for other equipment. In Soviet equipment - for chin straps for helmets SH-39, SH-40, for straps for steel bibs and also as f..
0.28 €
The items in the photo (finished straps and metal parts) are shown to show the real shades and the size of the strap. We offer only a cut of the strap of the chosen length.Price for 10 cm, can be cut to any length. 1 meter = 10 items. Discounts for wholesale from 24 m.Cotton slings for equipment.Olive-sand colour (also known as khaki). Width is 20 mm (the Germans also used 16 mm and 18 mm). It is suitable for staps for German gas mask boxes, for parts of Soviet equipment, including chin straps for helmets, for completing awnings and belts for Soviet and German historical armored vehicles, motorcycles.This sling can be used with 18 mm buckles and 18 mm or 20 mm tips for German tropical gear. Remember, if you take both buckles and tips, they must be the same size so that the tip fits into th..
0.14 €
A sling tip for tropical and "late" gear: pouches, pouches, A-frames, a bowler strap, a tent raincoat. It is designed specifically for 18 mm slings. It is an extremely rare item, but it is not found anywhere else in good quality. It has a LUX stamp.Check the width of the sling you have!The sling must be at least 18 mm (17,5-18,5 mm is acceptable).It is very easy to install. It is enough just to insert the sling inside and clamp it. To make it easier, you can slightly loosen the tip with pliers. Use masking tape to protect the paint during installation. The result is a neat tip that appears to be factory-installed on the press! Whereas decompressed semi-finished products can never be installed beautifully without special equipment.The price is for 1 tip...
3.32 €
The tip on the sling of the equipment is 20 mm. It is an extremely rare item, but it is not found anywhere else in good quality. It has a LUX stamp.Check the width of the sling you have!The sling must be at least 20 mm (19,5-20,5 mm is acceptable).It is very easy to install. It is enough just to insert the sling inside and clamp it. To make it easier, you can slightly loosen the tip with pliers. Use masking tape to protect the paint during installation. The result is a neat tip that appears to be factory-installed on the press! Whereas plain billets can never be installed accurate without special equipment.The price is for 1 tip...
3.32 €
1.90 €
Pin (peg, lug) to the German equipment strap (Zelt strap, Packungriemen), made of aluminum. The shape is "mushroom", the cap is convex on top, flat on the bottom. It was also used on hanger "frog" for bayonet. The height of the leg is 4 mm, the dimensions without the leg (that is, the size of the peg installed on the product) is approximately 8×8×8 mm.The kit includes an aluminum washer.Price for 1 piece (pin + washer)...
3.32 €
Pin (peg, lug) to the German hanger "frog" for bayonet and other equipment. The shape of the head is rounded, flattened. Facilitates opening, designed for many cycles of button-unbutton. The height of the leg is 4 mm, the dimensions without the leg (that is, the size of the peg installed on the product) is approximately 8×8×8 mm.We sell pegs and washers made of aluminum and steel. The material can be selected from the list near the "Add to cart" button. If the desired material is not in the list, then such pegs are over. You can write to us and we will start production.The kit includes a washer. Price for 1 piece (pin + washer)...
3.32 €
Pin for the German equipment. It was used as the main fastener in the carrier of the foldable shovel, magazine-pouches to the MP-38/40 submachine gun, at the pouch to the muzzle mortar, pouch to the MG machine gun and many other equipment parts. The "pear" shape is ideal for multiple buttoning and unbuttoning. The height of the leg is 4 mm, the dimensions without the leg (that is, the size of the peg installed on the product) is approximately 8×8×8 mm.We sell pegs and washers made of aluminum and steel. The material can be selected from the list near the "Add to cart" button. If the desired material is not in the list, then such pegs are over. You can write to us and we will start production.The kit includes a washer. Price for 1 piece (pin + washer)...
3.99 €
Accurate and high-quality copy of a peg for a German pouch. Aluminum material (for pouches produced before 1940 inclusive). Includes a peg and washer, the price is for 1 peg with a washer (not for a set for the entire pouch).For riveting during installation, you may need a special stop so that the peg does not move upon impact.There were two types of pegs for such pouches: for the central section (rounded tip, "pear" - in the right photo) and for the side sections (sharp tip, "mushroom" - in the left photo). Before ordering, you need to select an option (peg type). If an option is not available for selection, then it has already been sold.Please note that we also sell rivets for these pouches (see Featured Products below)...
3.32 €
Standard aluminum rivet for German equipment (suspensions for bayonets, puches for a machine gun, ammo pouches for a carbine, etc.). A set of a rivet and a washer. Price for 1 pc.An example of using such rivets (a copy of the 98k carbine pouch, rear view).How to install the rivet?To do this, you will need an anvil with a recess in the form of a hemisphere. Ideally, there should be two: for both sides of the rivet, so that the finished hat is not flattened from the blows on a flat anvil. The rivet is cut approximately to the height of the future hat (if the height of the hat is 2 mm, then it can be cut by 2-3 mm, this will become clear during the trial installation and depends on the rivet material). Insert the rivet into a ready aperture, lean a hat on the supporting anvil for support..
0.28 €
An accurate and high-quality copy of the accessories for 1 piece of the Mauser pouch. Cheap copies of pouches often have good leather and threads, but very simplified accessories that need to be replaced. For example, pegs with a thread, not welded D-ring and so on.The set includes 3 pegs with washers, 1 D-ring and rivets with washers of different shapes. The material is aluminum (for pouches manufactured before 1940 inclusive). There were two types of pegs for such pouches: for the central section (rounded tip, "pear" — 1 piece in a set) and for the side sections (sharp tip, "mushroom" — 2 pieces in a set).For riveting during installation, a special stop may be needed so that the peg or rivet does not move on impact, and the tip comes out in a beautiful spherical shape. You can install th..
14.25 €
Original aluminum part. It was used on the belts of German satchels to secure removable shoulder straps. Rare item, not currently in production (because it is quite rare). Parts dug, may have small oxidized areas. General condition 4-5 points out of 5.Material aluminum.Price for 1 piece...
9.50 €
Original aluminum part. It was used on belts for German bread bags. Rare item, not currently in production (because it is quite rare). The part is dug, may have small oxidized areas. General condition 4-5 points out of 5.The clearance is 3 cm (designed for a strap up to 30 mm wide). External dimensions are 38×16 mm (sizes from different manufacturers may vary slightly).Price for 1 piece...
9.50 €
Original aluminum part. It was used on belts for German bread bags. Rare item, not currently in production (because it is quite rare). The part is dug, may have small oxidized areas. General condition 4-5 points out of 5.The clearance is 3 cm (designed for a strap up to 30 mm wide). External dimensions are 38×27 mm (sizes from different manufacturers may vary slightly).Price for 1 piece...
7.60 €
Long D-shaped ring for auxiliary strap of the German infantry Y-strap. One Y-strap needs 2 rings.We offer rings made of aluminum and steel. The rings are bent from a wire with a diameter of 4 mm. The rings are not painted.On aluminum, the seam is welded, polished. Steel ring has brass brazed seam. Price is for 1 ring (even if they are normally pair). You can buy 1 or more. You can put the ring metal option in the shopping-cart if it's in stock. If some option is not available, then it is not currently sold out. Perhaps it will appear later...
3.80 €
Original aluminum buckle. It was used on the straps of German satchels (backpacks) and later on Y-strap. The buckles are dug out, may have small oxidized areas. General condition 4 or 5 points out of 5.Material aluminum.Price for 1 piece...
14.25 €
Original aluminum buckle. It was used on the straps of German satchels (backpacks) and later on Y-strap. The buckles are dug out, may have small oxidized areas. General condition 4 or 5 points out of 5.Material aluminum.Price for 1 piece...
14.25 €
Rectangular ring for the item "Equipment loop". The material is aluminum, the ring is fused, one-piece. One side is convex, the other is flat.A very good copy, no difference from the original.The price is for 1 ring (even if the rings are paired). You can buy 1 ring each. The ring option that is in stock can be selected and put in the basket. If some option is not there, then it is not currently available. Perhaps it will appear later...
3.80 €
Screw with nut for German soldier's Y-strap. Made of aluminum. Price for 1 piece (not pair). You need 2 pieces for 1 Y-strap.We offer these screws made of aluminum or steel: for early and late (production after 1940) Y-straps, respectively. Usually all the parts in one product were made of same metal, but during the early 1940s there was a gradual transition to steel instead of aluminum, and a mixture of parts was encountered. The factories used stocks of what was left over from the 1930s along with new steel parts.The product material must be selected before ordering next to the "Add to cart" button. If some option is not there, then such screws are currently sold out.Price for 1 piece (not a pair). One Y-strap needs 2 screws.We also sell other accessories for the Y-straps. See related pr..
3.99 €
Front ring for a bread bag in the shape of the letter D.Made of 3 mm wire (early rings were exactly like this, since 1940 they have become stronger - 3.5-4 mm). Clearance 24 mm. The connection is welded. For one bread bag you need 2 rings. Price per 1 piece. We offer rings made of aluminum and steel. Aluminum ones were never painted in the original.The original ring and our copy side by side. The price is for 1 ring (even if the rings are paired). You can buy 1 ring at a time. You can choose the version of the ring that is in stock and add it to the cart. If some version is not there, then it is currently out of stock. It may appear later...
2.37 €