Helmets, headdress



Peaked cap WSS NCO w/o insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.It is sold without insignia and cord. Add an option and we will install insignias and cord for you. Attention! We install high quality insignias and cord (see photo). We can make finalize the cap for an officer or for soldiers and feldwebel (sergeant). If the necessary parts are not available in the store, then they will have to wait..

50.00 €

In stock
WhH Panzer peaked cap w/o insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.It is sold without insignia and cord. Add an option and we will install insignias and cord for you. Attention! We install high quality insignias and cord (see photo). We can make finalize the cap for an officer or for soldiers and feldwebel (sergeant). If the necessary parts are not available in the store, then they will have to wait..

50.00 €

In stock
WSS Panzer black cap museum quality

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.A magnificent copy of the German SS tank-crew cap. The cap was created based on the original cap, high-quality authentic materials and very good insignias of original quality (with a mirror underside) were used. The cap is made of cloth and fastened wit..

65.00 €

In stock
Helmet decal KM eagle

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose!The price is for 1 (one) shield, not for a pair (not for a set). The buyer collects the kit independently, buying the necessary number of shields.To see additional photos please follow the link.We offer high-quality copies of original designs produced exclusively for our store. Our decals are an independent development. Decals have the accurate proportions and good detailing. Decals were printed on a professional..

4.00 €

In stock
WH helmet decal aged

The price is for 1 (one) shield, not for a pair (not for a set). The buyer collects the kit independently, buying the necessary number of shields.To see additional photos please follow the link.We offer high-quality copies of the original patterns, produced exclusively for our store. Our decals are an independent development based on original designs. The decals have the accurate proportions, they are printed on professional equipment.The decals are artificially aged, that is, the white color is yellowish, and there are already scratches and chips on the image. Such decals are well suited for reenactment, so that they do not look new as from the factory. They are also good for film production.How to install the decal? Put a piece of paper with the image (as it is, do not cut anything) in w..

4.00 €

In stock
Insignia sewing (service)

You can sew the insignias yourself. But it's impossible to do it well the first time. Even if you have "a neighbor seamstress", (s)he most likely does not know which stitch, which threads and at what distance from the shoulder to sew a patch. Moreover, sewing a BeVo (that is, a thin) patch by hand from an untrained person takes about 3 hours. And if there is no experience in folding BeVo insignias before sewing, then you can simply destroy the insignia and actually lose money. Entrust the work to experienced people!How do they sew?There are several craftsmen who know the historical and sewing part of the work. We sew by hand, by a mashine, on a substrate - in all ways according to your request. Of course, we will do this historically correctly (some patches in the original were s..

29.00 €

In stock
Ushanka hat natural white fur

Winter fur hat of the Wehrmacht model 1943. Modern production. High quality copy. Sewn like a Russian hat with earflaps, but with an oval crown. Made from cloth and natural fur. Thanks to this, the hat warms well in winter frosts.Rabbit fur is natural, it should not to be wetted, otherwise the skin under the fur will become stiff. Hat has ties at the tips of earflaps and also a button with a loop. It is better to attach the hat to the button when folded, so it turns out more accurately. Use ties to fasten under the chin. Inside the dome there is a stamp with the name of the manufacturer and the size of the hat.Suitable for supplementing collections, military-historical reconstruction of the uniform of the Wehrmacht during the Second World War, filming in documentaries.The color of the thre..

89.00 €

In stock
Ushanka hat natural gray fur

Winter fur hat of the Wehrmacht model 1943. Modern production. High quality copy. Sewn like a Russian hat with earflaps, but with an oval crown. Made from cloth and natural gray fur. Thanks to this, the hat warms well in winter frosts.Rabbit fur is natural, it should not to be wetted, otherwise the skin under the fur will become stiff. Hat has ties at the tips of earflaps and also a button with a loop. It is better to attach the hat to the button when folded, so it turns out more accurately. Use ties to fasten under the chin. Inside the dome there is a stamp with the name of the manufacturer and the size of the hat.Suitable for supplementing collections, military-historical reconstruction of the uniform of the Wehrmacht during the Second World War, filming in documentaries.The color of the..

89.00 €

Out of stock...
Cap 1943 feldgrau

M43 made of  feldgrau cloth with olive or gray lining (depends on batch). The visor has a soft insert of several layers of fabric, so the cap can be put in your pocket and washed in the washing machine. There are special loops on the inside of the flaps which serve to hold a special cloth acceccory (extra cold protection) or hold ends of the flaps when they are down (in cold season). The buttons of earflaps are under the chin (not under the nose) if you fold them properly and unsing these loops.Buttons not painted (silver colour, aluminum), despite the fact that they are painted in the photo. We can take a photo of exactly your future cap before your purchase. You can buy a cap with painted buttons cap here Cap 1943 black Replika.There are nice ink stamps inside the dome of ..

32.00 €

In stock
Feldgrau cap variant 2

The color of the threads, cloth and lining may be slightly different from batch to batch (and from the photo), but always remains within the historical compliance. We can take a photo of exactly your future cap before your purchase.Cap produced by "Replika" in Russia. We carefully studied the original caps and created our own copy. We declare that it is the best copy of the M43 cap in the world (here it is necessary to consider that there were many variations of M43s, they were sewn on tens of the enterprises; seams, even length of the visor were a little different). At the same time our copy is very carefully sewn, the highest factory quality.Original caps have differences depending on the year of production and the manufacturer. We collected the characteristic features of the early assem..

25.00 €

In stock
Cap WhH  feldgrau 1943 with insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The  insignia is sewn on at the factory. It is sewn under the lining, not through. Very accurate and reliable performance.The visor of the cap is reinforced with a thin insert, like the original. The visor can be wrinkled, twisted and straightened again, you can stuff the cap into a gas mask tank or pocket, you can wet it i..

50.00 €

In stock
Cap WSS  feldgrau 1943 with insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The  insignia is sewn on at the factory. It is sewn under the lining, not through. Very accurate and reliable performance.Copies the late original SS combined insignia — eagle and cockade in the shape of a trapezoid.The visor of the cap is reinforced with a thin insert, like the original. The visor can be wrinkled, twisted ..

50.00 €

In stock
Feldgrau cap 1 button

Cap produced by "Replika" in Russia. We carefully studied the original caps and created our own copy. We declare that it is the best copy of the M43 cap in the world (here it is necessary to consider that there were many variations of M43s, they were sewn on tens of the enterprises; seams, even length of the visor were a little different). At the same time our copy is very carefully sewn, the highest factory quality.The cap has one 19-mm button on the front. This option was used mainly in the SS field units.Visor of standard length (6-7 cm), not shortened. Insert of soft, supple and elastic material is inside that is water-resistant. The visor cannot be broken. If you bend it fully (cock), it will keep the form. But when it is then unbent, it'll be plain again almost without traces.Some be..

25.00 €

In stock
Cap WSS with insignia one button

This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.Cap of our production with an insignia. The  insignia is sewn on at the factory. It is sewn under the lining, not through. Very accurate and reliable performance. Caps with one button were characteristic of the SS. To see additional photos please follow the link.High-quality insignia is also our production. Copies..

50.00 €

In stock
Black cap

The color of the threads, cloth and lining may be slightly different from batch to batch (and from the photo), but always remains within the historical compliance. Buttons not painted (silver colour, aluminum). We can take a photo of exactly your future cap before your purchase. You can buy a cap with painted buttons cap here Cap 1943 black Replika.The visor has a soft insert of several layers of fabric, so the cap can be put in your pocket and washed in the washing machine...

27.00 €

In stock
Black cap variant 2

Cap produced by "Replika" in Russia. We carefully studied the original caps and created our own copy. We declare that it is the best copy of the M43 cap in the world (here it is necessary to consider that there were many variations of M43s, they were sewn on tens of the enterprises; seams, even length of the visor were a little different). At the same time our copy is very carefully sewn, the highest factory quality.Original caps have differences depending on the year of production and the manufacturer. We collected the characteristic features of the early assembly in our cap (seams, cut, etc.) common for 1943 production. For example, the flaps are made so that the seam is turned inside out along the entire length, and where it comes to the side cap detail, it is put face out. Later they b..

25.00 €

In stock
Blue-gray cap

The color of the threads, cloth and lining may be slightly different from batch to batch (and from the photo), but always remains within the historical compliance.Cap produced by "Replika" in Russia. We carefully studied the original caps and created our own copy. We declare that it is the best copy of the M43 cap in the world (here it is necessary to consider that there were many variations of M43s, they were sewn on tens of the enterprises; seams, even length of the visor were a little different). At the same time our copy is very carefully sewn, the highest factory quality.Original caps have differences depending on the year of production and the manufacturer. We collected the characteristic features of the early assembly in our cap (seams, cut, etc.) common for 1943 production. For exa..

25.00 €

In stock
Blue-gray cap single button

Cap of blue-gray cloth with one 19-mm button. Lining of brownish-beige artificial silk (cotton in 1943 was no longer used for lining, because cotton had become a deficit by that time). Button is aluminum, painted in pale blue. The cap has loops in order to keep the ears when they are down. Ink stamp with the manufacturer number, size and year of production is on the cupola.Visor has standard length (6-7 cm), not shortened, inside is insert of soft, supple material that is water-resistant. Our material is reliable to aging and resistant to water (washing). The visor is soft, easy to bend, and when the cap is on the head, the visor he takes the form of a beautiful arc. It can be given the triangular shape (as happened with worn caps of veterans). The visor should be strongly bent for this — ..

25.00 €

In stock
Jäger cap

Jäger cap: short visor, leather tape around the head, the characteristic brown buttons. The cap is made of thick cloth, has ventilation holes on sides, and has stamp of the manufacturer and size inside on the cupola.Inside of the visor is cardboard. The cap shouldn't be washed in the washing machine. You should apply a liquid cleaner on the contaminated areas, rub these with a brush or sponge and rinse with a stream of water. Dry expanded.The material of the lining, buttons and stamps may differ from that in the photo, but will be within the historical compliance.T-form insignia was usually sewn on the front. You can buy it from us and sew on your own, or choose a cap with already sewn insignia, made by a scilled tailor.Price for 1 cap. Other items in the photo are not included i..

35.00 €

In stock
 Jäger cap variant 2

Cap of the Jäger troops: short visor, leather tape around the perimeter of the head, brown buttons. The cap is made of dense cloth, has holes for ventilation on the sides, and a manufacturer's stamp inside.The lining material may differ from what is in the photo, but will be within the framework of historical compliance. Additional photos on request (note the size you wish)...

30.00 €

In stock
Jäger cap with Т-shape insignia

This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose!Jäger cap: short visor, leather tape around the head, the characteristic brown buttons. The cap is made of thick cloth, has ventilation holes on sides, and has stamp of the manufacturer and size inside on the cupola.To see additional photos please follow the link.Inside of the visor is cardboard. The cap shouldn't be washed in the washing machine. You should apply a liquid cleaner on the contaminated areas, rub t..

45.00 €

In stock
Jäger cap with Т-shape insignia variant 2

Cap of the Jäger troops: short visor, leather tape around the perimeter of the head, brown buttons. The cap is made of dense cloth, has holes for ventilation on the sides, and a manufacturer's stamp inside. An early T-shaped BeVo insignia is sewn manually.The lining material may differ from what is in the photo, but will be within the framework of historical compliance. Additional photos on request (note the size you wish)...

40.00 €

In stock
Jäger cap black colour

There were no such caps in the troops, but they could be ordered in private, because the model was extremely popular at that time. We did this cap not for reenactors, but for civilians who love “German style” and black colour.High quality woolen cloth and cotton for lining are used, inside is sheep leather band. Brown buttons are like Steinnuß (stone walnut) buttons, which were very common on the original jaeger caps of the time. Buttons on this cap are made of synthetic polymer, although at the beginning of the XX century they were made from walnut "corozo". Soft flexible insert is in the visor, it holds the visor, and it can not be broken. It is water-resistant. Inside the cap there is a manufacturer's mark.Cap looks impressive. Verified!..

29.00 €

In stock
Drillich summer cap

Drillich summer cap made by "Replika". Cotton HBT fabric. 2 pairs of ventilation holes. Gray artificial silk lining.Visor has standart lenght (6-7 cm, not shortened) and insert of soft, conformable and resilient material that is not afraid of water. The visor is impossible to break down. It will remember its shape when fully bended. And when you bend it back it will become straight almost with no traces. Ink stamps (manufacturer's number, year and size) inside the cupola.Other sizes will be available later this year...

25.00 €

In stock
Dots Erbsentarn camo cap

Very high quality camouflage cap of the SS. Produced by "Replica" in Russia. If you use the Dot uniform not for reenactment, but for tourism/hunting, then the cap will be very useful for you.Herringbone cotton fabric is quite light and is great for use in hot weather. A beautifully executed camouflage pattern, a neat copy without unnecessary "finishing" and "invention", which is often found on cheap copies. The correct shape of the bottom (inverted egg), wide visor, all the features of the assembly are respected (for example the line along the edge ends at the visor, and doesn't go above the visor, like on originals).All caps carry a beautiful, well-reproduced SS-BW marking (SS-Bekleidungswerke, clothing factories of the SS, the runes are specially split up in the photo). Arabic numerals o..

35.00 €

In stock
Dots Erbsentarn camo cap

Very high quality camouflage cap of the SS. Produced by "Replika" in Russia. If you use the Dot uniform not for reenactment, but for tourism/hunting, then the cap will be very useful for you.Cotton fabric is light and dense, has a water-repellent impregnation, drops roll off it! Great for use in autumn. A beautifully executed camouflage pattern, a neat copy without unnecessary "finishing" and "invention", which is often found on cheap copies. The correct shape of the bottom (inverted egg), wide visor, all the features of the assembly are respected (for example the line along the edge ends at the visor, and doesn't go above the visor, like on originals).All caps carry a beautiful, well-reproduced SS-BW marking (SS-Bekleidungswerke, clothing factories of the SS, the runes are specially split..

25.00 €

In stock
Oakleaf A camo cap

The cap is made in Russia from material produced in Russia. The camouflage is a neat and complete copy of the "Oakleaf A" pattern, almost 1x0.5 meters in size, without repeating the pattern, so there cannot be two identical caps. Very high quality camouflage pattern with the correct form of spots.The fabric is a copy of the German tent fabric (Zeltbahn) and corresponds to it in terms of texture and properties. Repels water due to the tight weave of the threads, just like the original fabric. Does not shine through in the sun. Like the original fabric, it is not waterproof: rain resistance is due to the swelling of the threads under the influence of moisture, which create a very dense surface.The cap is double-sided, fully reversible: on one side, the camouflage is made in summer (gree..

30.00 €

In stock
Blurred Edge camo cap

Replica camouflage double-sided SS cap. Made in Russia according to patterns developed by the Replika store on the basis of original samples. Camouflage fabric of our own production, dense cotton material. On one side green shades of spots for summer, on the other brown for autumn. The cap has the correct shape of the bottom (an inverted egg). To the right and to the left there are 2 air vents treated with a thread  (the metal edging of the holes was was rarely found on such caps and on the latest series).In the visor inlay is not afraid of temperature changes, does not break. It's shape-remembering, that is, the visor can be worn bended in any shape you like. Cap can be washed in a washing machine.On the "autumn" side there is a sweat-tape, it also closes the rim of th..

30.00 €

In stock
Planetree camo cap

Our copy of the SS camouflage double-sided cap is made in Russia according to the patterns developed by the Replika shop on the basis of original samples. The fabric is imported, dense cotton material, one side has green shades of spots for summer, the other has brown for autumn. The cap has the correct shape of the bottom (turned over egg). To the right and to the left there are 2 air vents treated with a thread (the metal edging of the holes was rarely found on such caps on the most recent series).In the visor inlay is not afraid of temperature changes, does not break. It's shape-remembering, that is, the visor can be worn bended in any shape you like. Cap can be washed in a washing machine.On the "autumn" side there is a sweat-tape, it also closes the rim of the cap. All this is sewn in..

25.00 €

In stock
Planetree camo cap

Our copy of the SS camouflage double-sided cap is made according to the patterns developed by the Replika shop on the basis of original samples. The cap has the correct shape of the bottom (an inverted egg). On the right and on the left, there are 2 air vents, processed with a thread (the metal edging of the holes was rare on such caps and on the latest series).The cap is made in Russia from material produced in Russia. The camouflage is a neat and complete copy of the "Platan 5/6" pattern, almost 2x1.5 meters in size, without repeating the pattern, so there can be no two identical caps. And that is why the "numbers" and "lines - the edges of the pattern" beloved by reenactors are rarely seen on caps. But they are!The fabric is a copy of the German tent fabric (Zeltbahn) and corresponds to..

30.00 €

In stock
Marsh Swamp camo cap

Swamp (Sumpf, Sumpftarn) camouflaged cap made by "Replika". Cotton fabric. 2 pairs of ventilation holes. Dull-olive lining.Visor has standart lenght (6-7 cm, not shortened) and insert of soft, conformable and resilient material that is not afraid of water. The visor is impossible to break down. It will remember its shape when fully bended. And when you bend it back it will become straight almost with no traces. Ink stamps (manufacturer's number, year and size) inside the cupola.Eyelets (holes in the sides of the cap) can have a different diameter, color and fit (the distance between them) within the historical framework.Variants of eyelets that are on the cap produced by Replika.Variants of eyelets on the original caps. Sources: therupturedduck.com, warrelics.eu, virtua..

10.00 €

In stock
Cap camouflage based on the German

Size 56.The cap is created according to patterns of double-sided SS camouflage caps 1942-1944 from modern fabric.Cotton fabric is light and dense. Camouflage is modern. Suitable for tourism, fishing, hunting. Cap in a single copy!The cap can be machine washed, but it is better to wash such a cap by hand in order to maintain its appearance for a long time. The insert in the visor is flexible and soft, but at the same time resilient. The properties of the material are similar to leather, however, it is not afraid of water and does not collapse when washed in a washing machine...

25.00 €

In stock
Side cap М34

The cap of the 1934 model is the main headdress of the Heer soldier. It was also used in the SS before the introduction of a cap of its own design in 1940 (similar to the Luftwaffe cap). Feldgrau cloth, khaki cotton lining. Metal edging of the vent hole is black or feldgrau.The color of the materials may differ from what is shown in the picture, but it always remains within the historical correspondence. We are always ready to take a picture of your product at your request. Insignias usually are the Heer eagle and cockade and a piece of braid of the branch colour above the cockade like a triangle (disappeared during the war). Insignias can be purchased separately in our shop.There are many styles of wearing a cap: as a hat, on the side, on the back of the head, etc. However, the ..

22.00 €

In stock
Side cap М34 1934 with insignia

The cap of the 1934 model is the main headdress of a German soldier. Feldgrau cloth, khaki cotton lining. The metal edging of the fan hole is black.The insignias are sewn: an eagle and a cockade, as well as the edging of the color of the armed forces (infantry, white) in a triangle above the cockade.To see additional photos please follow the link...

50.00 €

In stock
Side cap М34 black

The side-cap of the sample of 1934 is the main headdress of the German soldier. Black cloth, cotton lining. Metal edging of the fan hole.The color of the lining may differ from what is shown in the picture, but always remains within the framework of historical conformity. We are always ready to photograph you exactly your product at your request.The cap is suitable for the Heeres Panzerwaffe (until the end of the war) and for the SS (only during the first years of the war, later in the SS began to use caps of another form)...

20.00 €

In stock
Side cap М34 with М40 insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.The cap of the 1934 model with insignia set of the 1940 model (against the background of the feldgrau)is the main headdress of a German soldier. Feldgrau cloth, beige cotton lining. The metal edging of the fan hole is black.The insignias are sewn: an ea..

50.00 €

In stock
Side cap М40

Feldgrau colour cloth, lining is grey or olive artificial silk or beige cotton.There is an ink marking inside the cap: the name of the manufacturer, the year of production (1940) and the size...

22.00 €

In production
Side cap М42

Side cap model 1942 with a flap that may cover ears like on model 1943 cap and two buttons on the front. Cotton lining of gray or olive color, eyelets (fans) made of metal and painted black.Buttons not painted (silver colour, aluminum), despite the fact that they are painted in the photo. We can take a photo of exactly your future cap before your purchase...

31.50 €

Out of stock...
Mountain Jäger officer peaked cap

This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.We produce the visor to order after payment. You can take any size. The production period is 1 month, there will be a discount for several caps.To order, please contact us by e-mail or call our phone:+7 916 571-6568to@reenact.storeThe cap of an off..

110.00 €

In production
AllgSS black peaked cap w/o insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.It is sold without insignia and cord. Add an option and we will install insignias and cord for you. Attention! We install high quality insignias and cord (see photo). If the necessary parts are not available in the store, then they will have to wait up to 2 months. Contact us before ordering insignia adding to be sure. You can also b..

50.00 €

In stock
Peaked cap WSS infantry officers w/o insignia

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.It is sold without insignia and cord. Add an option and we will install insignias and cord for you. Attention! We install high quality insignias and cord (see photo). We can make finalize the cap for an officer or for soldiers and feldwebel (sergeant). If the necessary parts are not available in the store, then they will have to wait..

59.00 €

In stock
WSS infantry officer peaked cap crusher

If you need additional photos of the product, write to us by email or in the messenger.The cap of an SS infantry officer, it is the so-called "soft" or "crusher" model. It is distinguished by the absence of a spring in the dome, the absence of any cord in front and a soft visor made of leather or synthetic material. The military officers liked the cap very much, because it could be put in a pocket or bag, it was easy to wear inside vehicles, it was a real field cap, and not a ceremonial headdress that required attention and care.The peaked cap has field gray top, black velvet band, white piping. Visor made of genuine leather, with an additional synthetic waterproof coating on top.There's a leather band around the perimeter inside the cap, it has a perforation in front (to remove heat ..

 90.00 € 
80.00 €

In stock
[on order] Herman Meyer LfW tropical visor

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write ..

110.00 €

To order
 LfW private paratrooper pilot peaked cap

If you need additional photos of the product, write to us by email or in the messenger.The cap of a private or non-commissioned officer of the Luftwaffe (up to officer rank); the military branch is flight personnel (pilots, ground technicians) or paratroopers. A blue-gray cloth top, a black band of braided ribbon, yellow edging, a black strap made of artificial leather. The visor is also made of artificial leather, with a sheathed edge, black lacquer on top, dark green on the bottom.There's a leather band around the perimeter inside the cap, it has a perforation in front (to remove heat from the forehead), and on a brand of the manufacturer Anton Kreisel K.R.E.A.G.D.R.P u. D.R.G.M. on the side. Inside on the dome there is a celluloid detail to protect the top of the cap from head sweat. It..

100.00 €

In production
[on order] KM sailor cap

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by e..

112.00 €

To order
[on order] Komandor Admiral peaked cap

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by e..

110.00 €

To order
[on order] KM officer peaked cap

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by e..

110.00 €

To order
[on order] KM NCO peaked cap

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by e..

110.00 €

To order
[on order] Führer's party peaked cap

The product will be produced and delivered from 1 to 2 month after payment. Order more peaked-caps of other types in one order to get a discount!We can make changes to the cap for free at your request: change the color of the band, edging, make a cap for another rank, etc.This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write ..

110.00 €

To order
Toque balaclava pipe-scarf mouse gray

The woolen pipe to protect the throat and back of the head. Every German soldier during the Second World war had one. It stretches well, but does not sprawl, keeps shape. Warm, soft, better than a scarf, because it doesn't untie. Suitable for use outside the reenactment hobby, an indispensable thing for autumn and winter chilly weather. It may be placed even in a shirt pocket when folded.At the same time the toque may cover both the forehead and the neck, dropping on the shoulders. Weight 90 g. It has a seam.The side-cap is present on the photo to explain how to use the toque. The side-cap is not included in this product.The color is mouse gray (medium gray with a slight shade of green). The photo below shows a comparison of this shade with the general medium-gray color (we also make ..

12.00 €

In stock
Toque balaclava pipe-scarf olive-green

The woolen pipe to protect the throat and back of the head. Every German soldier during the Second World war had one. It stretches well, but does not sprawl, keeps shape. Warm, soft, better than a scarf, because it doesn't untie. Suitable for use outside the reenactment hobby, an indispensable thing for autumn and winter chilly weather. It may be placed even in a shirt pocket when folded.Color olive (green).Size 50х28 cm (in flat form). Therefore at the same time the toque covers both the forehead and the neck, dropping on the shoulders. Weight 90 g. It has a seam.The cap is present on the photo to explain how to use the toque. The cap is not included in this product...

12.00 €

In stock
Toque balaclava pipe-scarf gray

The woolen pipe to protect the throat and back of the head. Every German soldier during the Second World war had one. It stretches well, but does not sprawl, keeps shape. Warm, soft, better than a scarf, because it doesn't untie. Suitable for use outside the reenactment hobby, an indispensable thing for autumn and winter chilly weather. It may be placed even in a shirt pocket when folded.The size is 42×24 cm in a flat form.The color is ash gray. The photo below shows a comparison of this shade (on the left) with a gray and dark gray toques.At the same time the toque may cover both the forehead and the neck, dropping on the shoulders. Weight 90 g. It has a seam.The cap is present on the photo to explain how to use the toque. The cap is not included in this product...

12.00 €

In stock
Toque balaclava pipe-scarf dark-gray

The woolen pipe to protect the throat and back of the head. Every German soldier during the Second World war had one. It stretches well, but does not sprawl, keeps shape. Warm, soft, better than a scarf, because it doesn't untie. Suitable for use outside the reenactment hobby, an indispensable thing for autumn and winter chilly weather. It may be placed even in a shirt pocket when folded.The size is 42×24 cm in a flat form.This toque is made of dark gray colour wool. The photo below shows a comparison of this shade (on the right) with a general gray (in the middle) and ash-gray (the lightest).At the same time the toque may cover both the forehead and the neck, dropping on the shoulders. Weight 90 g. It has a seam.The cap is present on the photo to explain how to use the toque. The cap..

12.00 €

In stock
Toque balaclava pipe-scarf Feldgrau

The woolen pipe to protect the throat and back of the head. Every German soldier during the Second World war had one. It stretches well, but does not sprawl, keeps shape. Warm, soft, better than a scarf, because it doesn't untie. Suitable for use outside the reenactment hobby, an indispensable thing for autumn and winter chilly weather. It may be placed even in a shirt pocket when folded.Size 36х26 cm (in flat form). Weight 60 g. The toque has no seam, is sewn as a pipe, as originals were. Produced after the war for the NVA (DDR army).Color feldgrau (olive or greenish-gray). Since these balaclavas were produced for the German army in the postwar years, they laid in stock for a long time. Small fluctuations in color (fading) are acceptable and aren't rejects.We offer a choice of balacl..

12.00 €

In stock
Oakleaf camo helmet cover

Helmet cover in camouflage "Oakleaf", for Waffen-SS troops. Double-sided, invertible: green shades for summer and brown shades for autumn. It has loops for attaching branches and grass for camouflage, such began to be sewn to the covers since 1942. It is attached to the helmet with three metal hooks and a special pocket for the visor. Dense cotton fabric. Colors of camouflage are not bright.Suitable for helmets 64 and 66 (head 56...59), in the photo he is wearing a helmet 66. You can pull on a helmet 68...

20.00 €

In stock
Palmtree camo helmet cover

..

20.16 €

Will be later
Winter white helmet cover

A cover of white fabric for German helmets. It's suitable for any size of helmet...

12.00 €

In stock
Splinter camo helmet cover

Helmet cover in Splinter camouflage, for the ground forces (Heer) of the Wehrmacht. Bilateral; theoretically it can be turned inside out and used in winter, as the back of the fabric is white. The material is camouflage on one side and white on the other side (like original). We have different shades.Attached to the helmet with a drawstring. It fits all sizes of helmets, especially well on 66 and 68. In the photo, it is worn on a helmet 64.Cover produced by "Replika". Seams with a "lock", and not on an overlock (a seam with a lock is stronger, it was on covers and blouses, but modern manufacturers replace it with an overlock, which is easier and cheaper). The inside of the cover is white (some manufacturers use camouflage backing color fabric to reduce the cost and do not think about the i..

12.00 €

In stock
Marsh Swamp camo helmet cover

Helmet cover made by Replica. The smallest details on a seemingly simple object are observed. The seams are made with a “lock”, and not with an overlocker (a seam with a lock is stronger, this was used on covers and blouses, but modern manufacturers are replacing it with an overlocker, which is simpler and cheaper). The reverse side of the cover is white (some manufacturers use fabric in the color of the camouflage base to reduce the cost and do not think about the reverse side). The loops for camouflage are sewn taking into account the color of the camouflage, so that there is no light stripe on a dark spot (in the original they didn’t do this, but we love our work and made the covers a little better).We present one of the latest variants of the "Splinter" camouflage with the most blurry ..

13.00 €

In stock
Golden metallic cord strap for peaked cap

The golden cord was worn on generals' peaked caps of the Heer, the SS and the Luftwaffe (and other branches). The officers had silver cords.The cord is made of metal thread, it feels cold. Very good copy.Buttons (pins) are not included! Buttons are sold separately...

15.00 €

In stock
Aluminium liner to M35/40 German helmets

There is no size stamp on the rim on sizes 55, 56 (only an ink stamp on the leather). The brand of the manufacturer is on all the liners.A copy of the German liner. The sizes are accurate and the materials are carefully selected. Aluminum bands, 1.5 mm leather, beige or brown felt. On the sides of the band are size stamps (for example, 58/66 n. A., where 58 is the size of the head, and 66 is the size of the helmet). Size stamp is embossed on the inner rim also. The inner rim of the steel spring (Balaclava transition period of 1940, when often used parts made of aluminum and steel in the same product)! There is also the name of the manufacturer on the band (BERL. KOFFERFABRIK MAX DENSOW, a suitcase factory in Berlin is not the most popular, but one of the first manufacturers of these l..

50.00 €

In stock
Polka dot neckerchief

Original dark blue cotton fabric with white polka dots. Natural, dense, perfectly protects from the wind, pleasant to the skin.It is made in the form of a triangle 130 × 85 × 85 cm. Such scarves were worn by soldiers of the Wehrmacht and the SS. The scarf prevents dust from getting under clothes, prevents irritation of the skin on the neck and absorbs sweat well...

18.00 €

In stock
Helmet decal Heer eagle

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The price is for 1 (one) shield, not for a pair (not for a set). The buyer collects the kit independently, buying the necessary number of shields.We offer high-quality copies of original designs produced exclusively for our store. Our decals are an independent development. Decals have the accurate proportions and good detailing. Decals we..

4.00 €

In stock
Helmet decal Tricolor shield

The price is for 1 (one) shield, not for a pair (not for a set). The buyer collects the kit independently, buying the necessary number of shields.The tricolor of the national colors of the Reich: black, white, red.We offer 2 variants of a three-color shield:• Pointed Bottom — classic form for helmets of the Heer.• Round Bottom — met on Heer helmets of the mid-1930s, but was more popular in the air forces (respectively, paired with the Luftwaffe eagle).We offer high-quality copies made exclusively for our store. Our decals are an independent development. Based on the original designs, we created a computer model. It was carefully worked out, the dimensions and the slopes of the parts were carefully checked. Decals have the right proportions and perfect symmetry. Decals were printe..

2.00 €

In stock
Police decal eagle

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.This copy is an independent new development made specifically for the Replika store, it is not a reprint from copies. Based on the original samples, we have developed a computer model. The thickness of the frame, the dimensions and the slopes of the parts are carefully checked. The decals have the right proportions and perfect symmetry. T..

3.50 €

In stock
Party flag decal

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.We offer high-quality copies of original decals made to order for the Replika store. These copies are an independent development, not a reprint from other copies. Based on the original samples, we have developed a computer model. It was scrupulously worked out: the thickness of the frame, the dimensions and the slopes of the parts were ca..

4.00 €

In stock
Police decal eagle

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose!This copy is an independent new development made specifically for the Replika store, it is not a reprint from copies. Based on the original samples, we have developed a computer model. The thickness of the frame, the dimensions and the slopes of the parts are carefully checked. The decals have the right proportions and perfect symmetry. The decals were printed on professional equipment, the print conveys the smal..

4.00 €

In stock
Runic decal

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose!We offer high-quality copies of original decals made to order for the Replika store. These copies are an independent development, not a reprint from other copies. Based on the original samples, we have developed a computer model. It was scrupulously worked out: the thickness of the frame, the dimensions and the slopes of the parts were carefully checked. Decals have the right proportions and perfect symmetry. Dec..

4.00 €

In stock
LfW flying eagle decal

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The price is for 1 (one) eagle, not for a set. The buyer collects the kit independently, buying the necessary number of shields. To get the kit, you need to buy another shield: the Wehrmacht tricolor decal (most often with a round bottom).To see additional photos please follow the link.We offer high-quality copies of original designs..

4.00 €

In stock
LfW early shrimp eagle decal

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The price is for 1 (one) shield, not for a pair (not for a set). The buyer collects the kit independently, buying the necessary number of shields. To get the kit, you need to buy another shield: the Wehrmacht tricolor decal (most often with a round bottom).To see additional photos please follow the link.We offer high-qualit..

4.00 €

In stock
Strap for camouflage on helmet

A strap for fastening the camouflage of leaves and twigs on a helmet. It was used at the beginning of the Second World war. Materials: brown leather, oriented smooth side inward, and painted black outside, steel hooks and buckle, without any facing.For sale without a helmet...

29.00 €

In stock
Chicken wire net mesh Normandy 1.5 mm

Our wire net copies original samples and is suitable for reenactment. It fits any helmet. To install it, you need to bend all hooks over the rim of the helmet, and then pull and twist the central wire with pliers, shaping the net. Paint can get scratched, yes. The original helmets were also scratched under the wire net.The net is made of baked (soft) wire 1.5 millimeters thick.The helmet is shown for the illustration of the installed wire net, the helmet is not included in the price of the net. We do not install nets, we only sell nets...

25.00 €

Out of stock...
Black leather strap for NCO peaked caps

Black painted genuine leather strap for peaked-caps of privates and non-commissioned officers of the Heer. Very high quality. Sold without buttons...

18.00 €

Out of stock...
Silver metallic cord strap for peaked cap

The silver cord was worn on officers' peaked caps of the Heer, the SS and the Luftwaffe, and was also used on peaked-caps of other branches. The generals had golden cords.The cord is made of metal thread, it feels cold. Very good copy.Buttons (pins) are not included! Buttons are sold separately...

12.00 €

In stock
Field-gray eyelet block for German field cap

Metal (brass) eyelet for edging vents in German side-caps, field caps. Enamel painted in the correct color. The kit includes a washer for fastening from the inside. A manual press is used for installation, however, it is easy to fasten the eyelet manually (because it is quite soft) with a blunt round object as a rig.The inner diameter of 3 mm, the outer 7-8 mm.Price for one piece. You need 2 pcs. for a side-cap, 4 pcs. for a field cap (depending on model)...

0.38 €

Out of stock...
Aerosol paint for helmets

Paint for German helmets and equipment in aerosol-can 400 ml, alkyd, matte, opaque, color is chosen according to the RAL encoding.RAL 6006 is for painting German helmets, gas boxes, grenades and other large items (boxes, for example).RAL 6031 is lighter than 6006, it is usually found on small parts of equipment, for example, buckles, buttons, etc. It is an early shade of a feldgrau, which also occurred on pre-war M35 helmets.The aerosol is ready for use. Perfectly smooth coverage without expensive equipment!..

12.00 €

Out of stock...
Outer band for liner M31 aluminum

One rim 66/59 has a dimensional stamp, connected to the ring by rivets.Outer rim for M31 German liner for M35 helmets, suitable for M40. Made of aluminium, it comes unassembled, which allows you to assemble it together with other parts without stuffing them, without the risk of damage.Rivets for assembly (requires 2 pieces) are sold separately (see Featured Products below). Earrings for the chinstrap are not riveted and are not included. They can also be purchased separately.Our "constructor" allows you to repair original liners by replacing them piece by piece.No labels. Without side reinforcements (early model)...

12.00 €

In stock
Inner rim of liner M31 aluminum

One rim 66/59 has a dimensional stamp, assembled as a ring by a rivet.Inner rim for M31 German liner for M35 helmets, suitable for M40. Made of aluminium, it comes unassembled, which allows you to assemble it together with other parts without stuffing them, without the risk of damage. Aluminum spring.Rivets for assembly (requires 2 pieces) are sold separately (see Featured Products below). Springs and rivets can also be purchased separately from us.Our "constructor" allows you to repair original liner by replacing them piece by piece.No manufacturer's marks...

12.00 €

In stock
1 pc. split-pins steel economy

The price is for 1 piece. For 1 helmet you usually need 3 pieces.The klammer attaches a liner to a helmet sphere, to form a complete helmet. The legs of the original сlasps often break, so they are changed for copies.Our сlasps look great when installed. The interior is made differently from the original. Affordable price allows you to use them for inexpensive copies and props, and for repairs...

1.20 €

In production
Vent eyelets for M35 helmet

Price per pair.To repair helmets M35. Inserted into the holes at the level of the temples and riveted. You can simply put on epoxy glue and slightly round off the cut from the inside to mimic the splintering.Photos of the use of such a spare part — repair of the M35 helmet. More photos and an article describing the repair of the helm are available at militaryreview.su. ..

4.00 €

In stock
Brass split-pins for German helmet

Split-pins attach the liner to the sphere of the helmet to get a complete helmet. These pins often break on original helmets during disassemble process, so they are replaced with copies.Our split-pins are made on factory machinery and are copies of museum quality. They are very difficult to distinguish from originals if a person does not understand the stamps and the production history of the German helmets. Brass clasps are made entirely of brass and have golden color. The cap should be painted in the color of the helmet after installation.Price is per set (3 pieces)...

12.00 €

In stock
Steel split-pins for German helmet

Split-pins attach the liner to the sphere of the helmet to get a complete helmet. These pins often break on original helmets during disassemble process, so they are replaced with copies.Our split-pins are made on factory machinery and are copies of museum quality. They are very difficult to distinguish from originals if a person does not understand the stamps and the production history of the German helmets. Steel split-pins are made entirely of steel and are covered with a chemical composition against rust.Price is per set (3 pieces)...

12.00 €

In stock
Transition split-pins for German helmet

Split-pins attach the liner to the sphere of the helmet to get a complete helmet. These pins often break on original helmets during disassemble process, so they are replaced with copies.Our split-pins are made on factory machinery and are copies of museum quality. They are very difficult to distinguish from originals if a person does not understand the stamps and the production history of the German helmets. The transitional pins have steel legs and the washer, rolled in a brass cap.Price is per set (3 pieces)...

12.00 €

In production
Chin-strap for M35 helmet aged

Chin-strap with aluminum parts to German helmet M35. It is made to complete a set of original helmet of a museum copy. Waxed linen thread is used. The flesh-colored skin of which the strap is made was aged to look like the original.Made exclusively for the shop "Replika"! Very similar to the originals.The original straps with these stamps, the drawing of the stamps, and what do such plates with a stamp look like, are shown below.We offer such straps with the stamps of Wilhelm Eilers jr. Bielefeld 1936 и FRANZ BREHME 1938. Both are an exact copies of the original stamps, such stamps actually existed and are found in collections.The stamp must be selected before ordering next to the "Add to cart" button. If some option is not there, then such ones are currently sold out.How to install the st..

25.00 €

In stock
Chin-strap for М35/40 helmet

Strap for German M35 or M40 helmet with aluminum buckle and pins. Tight leather of skin colour, waxed thread. These straps are made exclusively for Replika shop. High quality. Stamped Wilhelm Willers Jn. Bielefeld 1936 (copy of the original stamp).The strap is installed so that the buckle is on the left cheek, and the tips are turned outward (so that the beige skin can be seen from the outside). Remember that the bosses are designed for a single connection, that is, it will be impossible to unbutton the boss without damaging the skin...

19.00 €

In stock
Chin-strap for М40/42 helmet aged

Chin-strap with steel parts to German helmet M40 or M42. It is made to complete a set of original helmet of a museum copy. The flesh-colored skin of which the strap is made was aged to look like the original. Waxed linen thread is used. All accessories are fined manually and painted in gray color, then they were artificially aged. Made exclusively for the shop "Replika"! Very similar to the originals.The original straps with these stamps, the drawing of the stamps, and the plates themselves are shown below.We offer such straps with the stamps of dfc42 and G. SCHIELE LOBURG 1941. Both are an exact copies of the original stamps, such stamps actually existed and are found in collections.The stamp must be selected before ordering next to the "Add to cart" button. If some option is not there, t..

25.00 €

In stock
Chin-strap for М40/42 helmet

Strap to the German helmet M40 or M42 with a steel buckle and bosses. The steel fittings are painted in light gray, as it was in the original. Thick flesh-colored leather, waxed thread. Made exclusively for the Replica store! Very high quality.We offer straps with various brands for the Wehrmacht and SS. Select the brand next to the "Add to cart" button. If there is no brand, then these straps are sold out.The strap is set so that the buckle is on the left cheek, and the tips are turned out (so that the light skin can be seen from the outside). Remember that the bosses are designed for a single connection, that is, it will be impossible to unbutton the boss without damaging the skin...

19.00 €

In stock
Showing 1 to 87 of 87 (1 Pages)