Search
Products meeting the search criteria
Cap of the Jäger troops: short visor, leather tape around the perimeter of the head, brown buttons. The cap is made of dense cloth, has holes for ventilation on the sides, and a manufacturer's stamp inside.The lining material may differ from what is in the photo, but will be within the framework of historical compliance. Additional photos on request (note the size you wish)...
30.00 €
If you need additional photos of the product, write to us by email or in the messenger.The cap of a private or non-commissioned officer of the Luftwaffe (up to officer rank); the military branch is flight personnel (pilots, ground technicians) or paratroopers. A blue-gray cloth top, a black band of braided ribbon, yellow edging, a black strap made of artificial leather. The visor is also made of artificial leather, with a sheathed edge, black lacquer on top, dark green on the bottom.There's a leather band around the perimeter inside the cap, it has a perforation in front (to remove heat from the forehead), and on a brand of the manufacturer Anton Kreisel K.R.E.A.G.D.R.P u. D.R.G.M. on the side. Inside on the dome there is a celluloid detail to protect the top of the cap from head sweat. It..
100.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.A replica of soldier's book of the Waffen-SS. Cover made of light-gray (almost white) cardboard, including a pocket for inlays. In the pocket memo "10 warfare principles of a German soldier" (10 Gebote für die Kriegsführung des deutschen Soldaten). Page..
7.00 €
Original iron-heels made in the Third Reich. Attic storage, stored in oil so as not to rust.This type of iron heels (thin profile with hidden fastening) was widely used for soldier's shoes.Price for a couple (set for 1 pair of shoes). The photographs show the condition of the iron-heels, we have quantities of iron-heels in stock. You will receive exactly those that you see in the photo or others in the same condition.What do iron-heels look like after installation?Iron-heels in this condition can be used for replicas of German shoes. They kept a completely new look. The surface coating of rust may be removed from the affected areas with a rust converter or a drill (although it is absolutely not necessary to remove it).In the photo above, the iron-heels in this condition are installed ..
18.00 €
Pebbled 12 mm shank button for German caps and other headgear, painted in dull-green (field gray, Feldgrau) colour. The button is assembled from three parts (front, rear and the leg). All parts are made of aluminium (white metal). Button bear no stamps.Price for 1 pc. You usually need 2 pcs. for 1 cap...
2.00 €
Pebbled 12 mm shank button for German caps and other headgear. Assembled from three parts (front, rear and the leg). The front part is aluminium (white metal). The back of the leg and brass/copper. Button bears no stamps. Price for 1 pc. You usually need 2 pcs. for 1 cap...
1.00 €
Gold buttons (pins) for German officer peaked-caps. These attach a twisted metal cord to the peaked-cap. Gold for generals (silver were for officers, respectively). Rarely found.Price per 1 piece (you need 2 pcs. for 1 cap).Silver ones you can buy also from us!..
2.50 €
Black buttons (pins) for German peaked-caps of enlisted men and NCO's. These attach the strap to the peaked-cap.Price per piece (you need 2 pcs. for 1 cap)...
2.50 €
Gold buttons (pins) for German navy (Kriegsmarine) peaked-caps. These attach a cord (chinstrap) to the peaked-cap. Very rarely found.Price per 1 piece (you need 2 pcs. for 1 cap)...
2.50 €
Silver buttons (pins) for German officer peaked-caps. These attach a twisted metal cord to the peaked-cap. Silver for officers.Price per 1 piece (you need 2 pcs. for 1 cap)...
2.50 €
Long D-shaped ring for auxiliary strap of the German infantry Y-strap. One Y-strap needs 2 rings.We offer rings made of aluminum and steel. The rings are bent from a wire with a diameter of 4 mm. The rings are not painted.On aluminum, the seam is welded, polished. Steel ring has brass brazed seam. Price is for 1 ring (even if they are normally pair). You can buy 1 or more. You can put the ring metal option in the shopping-cart if it's in stock. If some option is not available, then it is not currently sold out. Perhaps it will appear later...
4.00 €
Bosses (lugs) are needed to attach the strap to the earrings of M31 German helmet liner.We have aluminum and steel lugs for your choice. The material must be selected next to the "Add to cart" button. If you can't see any material there, then it is sold out.Price for 1 pc. One helmet usually need 2 pcs...
2.00 €
Original stakes for the German cape-tent or Zeltbahn. Original, restored, suitable for WW2 reenactment. See the tab "Historical reference" on the history of this item and its variants.The tent set usually included 2 stakes, 1 part of the pole and a rope. Price for one stake.We offer the following peg options:S&C (1939 aluminum peg);herringbone (steel peg S&C with herringbone logo from 1940, the brand is hard to see under a layer of paint);GA (1940 aluminum peg). Select the peg next to the Add to cart button. If an option is not there, then it is already sold out and not available for order...
10.00 €
Price is for 1 button. You need usually 2 buttons for a cap. Buttons of brown color, diameter of 13 mm from synthetic polymer. Such buttons served as a distinctive feature of the Jäger caps in the initial period of the war. A rare thing! Later, all the buttons were metal...
1.25 €
Rear D-shaped for main strap of the German infantry Y-strap. Also suitable for bread bags, almost the same used on pouches to the carbine (but there the weld was located on the arc). One Y-strap needs 2 rings. Price is for 1 pc.We offer rings made of aluminum and steel. The rings are bent from a wire with a diameter of 4 mm. The rings are not painted. The original steel rings were painted, as a rule, with light gray paint. Original aluminum fittings have never been painted.On aluminum, the seam is welded, polished. Steel ring has brass brazed seam. Price is for 1 ring (even if they are normally pair). You can buy 1 or more. You can put the ring metal option in the shopping-cart if it's in stock. If some option is not available, then it is not currently sold out. Pe..
3.00 €
Ring-hook for a German infantry assault backpack (A-frame) or for various backpacks. Independent development, made in Russia. The material is aluminium. No manufacturer's stamps.The hook is painted hammer gray, which is better to sand off or wash before use, because aluminum parts of this type were not covered with paint, as a rule. You can wash the paint with "acetone" or "646" solvent or brake fluid (for a car). Acetone dissolves the paint instantly, and if you use brake fluid, the product must be soaked for several hours in it. The advantage of brake fluid over solvent is the absence of a sharp smell (although it still has a smell).Price for 1 pc. Usually you need 4 for an equpment item...
2.00 €
Hook hook for the German infantry assault backpack (A-frame) or for various backpacks. The material is aluminum. Completely original, the condition is 4 or 5 out of 5 points.Price for 1 pc. Usually you need 4 for 1 equipment item...
15.00 €
Ring-hook for a German infantry assault backpack (A-frame) or for various backpacks. Independent development, made in Russia. Material steel, painted in matt grey.Superb quality. Price for 1 pc. Usually you need 4 for an equipment item...
3.50 €
The price is for 1 piece. For 1 helmet you usually need 3 pieces.The klammer attaches a liner to a helmet sphere, to form a complete helmet. The legs of the original сlasps often break, so they are changed for copies.Our сlasps look great when installed. The interior is made differently from the original. Affordable price allows you to use them for inexpensive copies and props, and for repairs...
1.20 €
Star (cube, pip) for the SS collar tabs. Produced using 3D modeling (scanning) of the original sample.The stars are made of a copper alloy with a thick color metal coating that does not peel off and does not chip. We specially sawed a star’s foot with a hacksaw, it took some time to get to the base metal. The stars are strong and with a very well-designed pattern, legs 20 mm long, 2 mm wide and 0.75 mm thick are brazed to the head, very durable, but mild.We offer the following colors:-silver (classic matte silver color, perfect for officer collar tabs);-silver with a patina (dull matte silver color with shaded black indentations, will look good with the field uniform of non-commissioned officers);-gold (shiny, for SA collar tabs, etc.).Price for 1 pc. Before buying, you need to select a co..
1.15 €
Star (cube, pip) for the SS collar tabs. Produced using 3D modeling (scanning) of the original sample. The width on the side is 15 mm, diagonally (from corner to corner) about 2 cm.The stars are made of a copper alloy with a thick color metal coating that does not peel off and does not chip. We specially sawed a star’s foot with a hacksaw, it took some time to get to the base metal. The stars are strong and with a very well-designed pattern, legs 20 mm long, 2 mm wide and 0.75 mm thick are brazed to the head, very durable, but mild.We offer the following colors:-silver (classic matte silver color, perfect for Unteroffiziere NCO collar tabs);-silver with a patina (dull matte silver color with shaded black indentations, will look good with the field uniform of non-commissioned officers)..
1.15 €
Price is for 1 button. You need usually 2 buttons for a cap. Brown buttons with a diameter of 13 mm, made of hard wood, which imitates the original buttons as closely as possible in texture and color. Such buttons at the beginning of the 20th century were usually made from Coroso walnut. They served as a distinctive feature of Jaeger caps in the initial period of the war. Rare item! Later, all the buttons were already metal...
7.35 €
Original front iron-plates made in the Third Reich. New condition. Available in all sizes!They were widely used for soldier's shoes. There were samples without such plates. However, in practice, they greatly help when walking through mud.Price for 1 piece (1 pair of shoes needs 2 pcs.). The photographs show the condition of the iron-heels, they are different but similar. Toe-tips (Stoßplatten) may have the product name (brand) TRIUMPH stamped on them (not all of them), number (size), some have no stamp. The stamp may be indistinct...
2.52 €
Price for 1 screw (set for 1 bayonet is 2 screws).Screws (bolts) for handle plates fastening to a Mauser 98 bayonet. Original screws could not be screwed out because of rust and they should be bored out. Plates changing may give to a bayonet a second life in reenactment or a collection...
4.00 €
Price for 1 screw (set for 1 bayonet is 2 screws).Screws (bolts) for handle plates fastening to a SVT (Tokarev) bayonet. Original screws could not be screwed out because of rust and they should be bored out. Plates changing may give to a bayonet a second life in reenactment or a collection...
4.00 €
Hook hook for the German infantry assault backpack (A-frame) or for various backpacks. Steel, matt grey painted. Original warehouse storage. Price for 1 pc. Usually you need 4 for 1 equpment item...
13.50 €
Pebbled 12 mm shank button for German caps and other headgear, painted in black colour. The button is assembled from three parts (front of aluminum, rear and the leg of brass/copper). Button bears no stamps.Price for 1 pc. You usually need 2 pcs. for 1 cap...
2.00 €
German Heer 12 Year Long Service Medal (including the blue ribbon). Finished in gold plate. Supplied complete with a length of cornflower blue ribbon and a small eagle (coat of arms of the Third Reich), which should be fixed on the tape...
22.00 €
Red silicone rubber 3 mm thick. Not afraid of deformation, heating, solvents. From this material, you can cut out the gasket of the shape that you need: on a canister, water tank, food thermos, etc.The price for a piece is 5x5 cm. Only one piece 5x20 cm left (4 units of the item).We cut any pieces (write the size in the comments to the order). The price for a piece of your size is obtained from the number of pieces of 5x5 cm that fit in this size. For example, a piece of 10x15 cm is 6 times 5x5 cm, that is, 6 units. If you are not sure that you calculated correctly, contact us in any way, we will help!How to work with rubber? In order to cut the gasket, you can use a sharp knife, scissors (with scissors the result will be rougher) or a specially made cutting (metal cutter in the shape..
1.50 €
Knitted 2-layer gloves, brown colour. For Red army reenactment. Afterwar made. New, from an army stock...
5.67 €
Mittens with woolen cloth insulation, tent fabric is on palm side and soft brown fustian on the other side. For Red army reenactment. Afterwar made. New, from an army stock...
4.00 €
Steel stamp (marker) of the Third Reich military acceptance bureau (Waffenamt, abbreviated WaA): letters WaA and the number 39 of the checking officer. Eagle wingspan 4 mm. This stamp can often found on the details of the bayonet to the Mauser carbine, for example. A stamp of military acceptance was applied to all items that were related to the weapon and its accessories. On weapons and ammunition (that is, on particularly important military items), the WaA stamp was applied to every detail, sometimes even several times.The height of the handle (finger) is about 10 cm. To work with a blow to steel and other metals, leather, wood. Hardness according to GOST 25727-83 from 55 to 62HRC. The brand is hard-tempered, you can work on the details of weapons and tools with hardness up to 43HRC. Don'..
52.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.We offer quality decals made specially for our shop. Sketches are developed on the basis of original inscriptions on German grenades. The drawings have the correct proportions and perfect symmetry. Decals are printed on professional equipment.The decals..
0.75 €
Paint for German helmets and equipment in aerosol-can 400 ml, alkyd, matte, opaque, color is chosen according to the RAL encoding.RAL 6006 is for painting German helmets, gas boxes, grenades and other large items (boxes, for example).RAL 6031 is lighter than 6006, it is usually found on small parts of equipment, for example, buckles, buttons, etc. It is an early shade of a feldgrau, which also occurred on pre-war M35 helmets.The aerosol is ready for use. Perfectly smooth coverage without expensive equipment!..
12.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.It is sold without insignia and cord. Add an option and we will install insignias and cord for you. Attention! We install high quality insignias and cord (see photo). If the necessary parts are not available in the store, then they will have to wait up to 2 months. Contact us before ordering insignia adding to be sure. You can also b..
50.00 €
1950s aluminum field bottle It is similar to a field bottle which was used during the Second World War. It has Krasnyj Vyborzhetz stamp. Differences: larger thread pitch on the lid, oval shape (in contrast to the drop-shaped during the war).The flask is not painted. New, however, there are traces of improper storage (numerous scratches on the case)...
7.00 €
1980s aluminum field bottle It is similar to a field bottle which was used during the Second World War. Differences: larger thread pitch on the lid, oval shape (in contrast to the drop-shaped during the war).The flask is painted in khaki colour (green of yellow-brown shade). New, however, there are traces of improper storage (scratches on the case)...
6.00 €
Aluminum fork-spoon, the standart dining set of German soldier. The Germans called it Göffel (like "fork-spoon") from the merger of the two words Gabel (fork) and Löffel (spoon). TSR 42 stamp. No more stamps on this item. Weight is only 35 g...
14.00 €
Cast aluminum hook for German field-bottles 1931-1940 (later they used steel hooks). It is a copy (cast) of the oLc model. The metal is softer than the original ones, but it holds the flask well...
8.00 €
There is no size stamp on the rim on sizes 55, 56 (only an ink stamp on the leather). The brand of the manufacturer is on all the liners.A copy of the German liner. The sizes are accurate and the materials are carefully selected. Aluminum bands, 1.5 mm leather, beige or brown felt. On the sides of the band are size stamps (for example, 58/66 n. A., where 58 is the size of the head, and 66 is the size of the helmet). Size stamp is embossed on the inner rim also. The inner rim of the steel spring (Balaclava transition period of 1940, when often used parts made of aluminum and steel in the same product)! There is also the name of the manufacturer on the band (BERL. KOFFERFABRIK MAX DENSOW, a suitcase factory in Berlin is not the most popular, but one of the first manufacturers of these l..
50.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Attention! Buckles can be without maker's stamps. The manufacturer changes stamps on the buckles from batch to batch. The absence of stamps is not a reason for discount or flaw! If you need a buckle with stamps, mention it in the order, w..
59.00 €
A copy of the highest quality and very rare thing, even as original, not to mention the copy. Museum quality, which can not be distinguished from the original, unless you know that such a copy exists.The mug is made of aluminum and covered with black semi-matte paint. There is a stamp HMS37 on it. The volume is 100 ml...
32.00 €
A copy of the grommet, which was used in the German army to strengthen the cord-holes on the equipment. It has an inner diameter of 9 mm and an outer diameter of about 19 mm, which corresponds to a small grommet on a tent (Zeltbahn), or on any type of army backpack.Grommets for the army were made of aluminum or zinc. Later made of galvanized steel. Aluminum and zinc (early) ones are the hardest to get today, reenactors often replace them with modern steel ones. This grommet is more suitable for use in reenactment.Price for 1 grommet + washer (for 1 hole with a clearance of 9 mm). The installation device is sold separately.Take a look at the photo below comparing the original grommet and our copy.The photo above shows the original grommet.Our copy of the grommet...
1.00 €
A copy of the grommet, which was used in the German army to strengthen the cord-holes on the equipment. It has an inner diameter of 17 mm and an outer diameter of about 32 mm, which corresponds to a small grommet on a tent (Zeltbahn).Grommets for the army were made of aluminum or zinc. Later made of galvanized steel. Aluminum and zinc (early) ones are the hardest to get today, reenactors often replace them with modern steel ones. This grommet is more suitable for use in reenactment.Price for 1 grommet + washer (for 1 hole with a clearance of 17 mm). The installation device is sold separately.Take a look at the photo below comparing the original grommet and our copy.The photo above shows the original grommet.Our copy of the grommet...
1.50 €
Price for 1 pc. (not for a couple).A copy of the cartridge bag for the Mauser 98 rifle and the Mauser 98k carbine. Surface-dyed leather with a thickness of 3 mm, with a grain of the correct size, was used. The color is black on the outside, natural beige on the inside. The fittings are aluminum, but the rivets are partially steel. There are dividers in each pocket. Without stamps.Only with close examination up close can you notice some simplifications. For example, the central ring is bent and cut on a straight section, and not on an arc, as was the original; and it's not welded. All pegs are of the same shape (the originals had slightly different side shapes than the central one).Sure you can use original pouches for the reenactment, but they have one big drawback: the tongues often come ..
28.00 €
If you need additional photos of the product, write to us by email or in the messenger.A die-struck badge with a bronze coating, recesses are shaded with a black patina.To see additional photos please follow the link...
25.00 €
This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.Stamped badge with a golden coating. A wreath of oak leaves, on which a sword is placed, immersed in a ball of snakes. Below the snakes is a skull. On the guard of the sword is a round swastika.To see additional photos please follow the link...
25.00 €
If you need additional photos of the product, write to us by email or in the messenger.Stamped badge with a silver coating. A wreath of oak leaves, on which a sword is placed, immersed in a ball of snakes. Below the snakes is a skull. On the guard of the sword is a round swastika.We offer badges with different silvering options:- light silver,- silver with a patina (dark "old" silver).Comparison of the color "silver" and "silver + patina" is given below, silver is lighter.The silvering option should be selected next to the "Add to cart" button before ordering. If an option is not there, it means this item currently sold out...
25.00 €
This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.A red woolen armband with a sewn white circle and a swastika in it. It was used with different types of party uniform. A striking detail of the military costume of the Third Reich. To see additional photos please follow the link.Made of red cloth. White and black are made of thick fabric, the details are assembled and sewn..
30.00 €
Armband of a medical orderly. Suitable for reenactment of orderlies around the world. This item was made in the USSR after World War II. Without manufacturer's marks. The cross is painted and does not crack. Ties on four sides.The size of the main fabric of the bandage is 35x10 cm, plus the length of the ties is 16 cm. The size of the red cross is 8 cm...
5.00 €
Original army shaving brush issued in the USSR in the 1950s. New condition, stored in an army warehouse.The handle is made of aluminum, natural bristles. Such a shaving brush was widely used by soldiers of the Red Army for shaving. The hard bristles gave a dense foam when whipped with a brush and allowed the foam to be well distributed over the face.Suitable for creating an atmosphere of everyday life of soldiers during military-historical reenactments, for filming films and creating thematic exhibitions.Price for 1 piece of soap. Other items that can be seen in the photos are given for understanding the color and size of the product, are not included in the price of this product, but are sold as separate products on our website...
3.00 €
Collar tabs with red stripes (mod. 1935) — for field uniform of the Wehrmacht (Heer) artillery and self-propelled guns. Very often were sewn not onto the collar, but on a rectangular piece of collar cloth (dark green), which then was attached to the collar with direct machine stiching. Collar tabs for self-propelled gun units had an undelay with red edge.The price is for a couple of collar tabs (kit for one jacket).These BeVo collar tabs (woven) are the total copy of the originals. Original "Litzen" were made in the form of a tape, and before sewing they were cut and bent in a special way to get "reels". The market offers collar tabs made on modern equipment from a thin thread and already cut in the form of reels. Although it is easier to sew such, but they will never give an aut..
2.00 €
Dense embroidery without shaggy threads on the inside. The inscription BDM-OSTEINSANZ is woven with light gray thread on a black background. BDM is an abbreviation for Bund Deutscher Mädel). Length about 53mm, width about 3cm...
21.00 €
The bag is made of thick tarpaulin with a leather strap and a chrome-plated steel buckle. Designed to carry two RGD-33 grenades and fuses to them...
23.00 €
Early pouch for RGD-33 grenades with a hard wall. The hard insert ensures comfortable wearing. Heavy RGD heads do not hit the thigh when moving on the battlefield.The pouch bears a pre-war ink stamp. The bag is made of tent fabric. Leather strap, galvanized steel buckle. The pouch is designed for 2 grenades (meaning mock-ups of grenades for reenacting or filming). Inside there is a pocket for pencil detonators...
32.00 €
Price for the empty bag (without a cape). The cape (filling of the bag) and and other items are present in the photo to understand the color and size of the product and is not for sale.Copy of the yperit bag. Dense material of light olive color (this is not a sand color!). Details from cotton braid. No manufacturers' marks.The bag is the right size and cut, perfect for a yperit bag. You can see it in the photo of the bag along with the cape inside...
20.00 €
Warm balaclava under a helmet from the Second World War. A high-quality copy, suitable for use outside of reenactment, a great thing for cold and dank weather.The Soviet balaclava covers the head and neck well, leaving a gap only for the eyes (you can stretch it over the entire face). Inside it has petals (for ears) that can be bent to the back of the head (to hear better) or forward to protect the ears (if it's cold). A very practical item.We offer two color options to choose from: white or brown. Select the color you want next to the "Add to cart" button. Price for 1 balaclava. The helmet in the photo is for illustration only and is sold separately...
15.00 €
Balaclava (tube scarf for the neck) made of lightweight material. Size of 25×48 cm. Removes moisture and retains heat...
1.00 €
To complement the museum weapon, the blank or dummy weapons. Copy. Material steel, black burnished. Modern production.Outer diameter 20 mm, length 15 mm.We offer several types of nuts:1 - unbroken knurl,2 - straight knurl,3 - oblique knurl.You can choose a type of a nut next to the Add to Cart button. If some type is available, then it is sold out. We do not produce goods to order, you can only buy what is available...
12.50 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.Battery Diamon 4,5 Volt. The label accurately reproduces the original. It was used in Soviet pocket flashlights, radios, etc., household and military electronics items.The battery can be used for its intended purpose, it is a new battery.We of..
7.00 €
Battery GNOME 4.5 V. The label accurately reproduces the original. It was used in Soviet pocket flashlights, radios, etc., household and military electronics items.The battery can be used for its intended purpose, it is a new battery.On the front part is the inscription "Dry battery GNOME. Radio electro-battery plant No. 1 RZAZ. Metkopromsoyuz Promkooperativ Moscow" (Сухая батарейка ГНОМ. Радио электро-аккумуляторный завод №1 РЗАЗ. Меткопромсоюз Промкооператив Москва). On the back is the appeal "The consumer, buying a battery, demand a test for a light bulb" (Потребитель, покупая батарейку, требуй испытания на лампочку). There is a paper seal on the contacts with the inscription "Test first, then tear it off" (Сначала испытайте, потом срывайте). On the side there is a marking "Pay att..
7.00 €
Blade "Be-Be" in the company packaging. High-quality copy. There is the seal of the manufacturer on the blade, it is not washed off and is not erased...
1.89 €
The color of the threads, cloth and lining may be slightly different from batch to batch (and from the photo), but always remains within the historical compliance. Buttons not painted (silver colour, aluminum). We can take a photo of exactly your future cap before your purchase. You can buy a cap with painted buttons cap here Cap 1943 black Replika.The visor has a soft insert of several layers of fabric, so the cap can be put in your pocket and washed in the washing machine...
27.00 €
Cap produced by "Replika" in Russia. We carefully studied the original caps and created our own copy. We declare that it is the best copy of the M43 cap in the world (here it is necessary to consider that there were many variations of M43s, they were sewn on tens of the enterprises; seams, even length of the visor were a little different). At the same time our copy is very carefully sewn, the highest factory quality.Original caps have differences depending on the year of production and the manufacturer. We collected the characteristic features of the early assembly in our cap (seams, cut, etc.) common for 1943 production. For example, the flaps are made so that the seam is turned inside out along the entire length, and where it comes to the side cap detail, it is put face out. Later they b..
25.00 €
Collar tabs for an overcoat of the Red Army, model 1935. black color with red edging (arms - gunners tankers). It should be sewn onto the overcoat collar with a hem. Such collar tabs were used until 1943. The collar tabs are the same as historical samples in shape and color, made of dense cloth, the seams are even and neat. High-quality copies.Price for a set (a pair)...
7.00 €
Collar tabs for a tunic (or field shirt "Gimnastyorka", USSR), arr. 1935. The color is black with red edging (type of troops - gunners tankers). It should be sewn onto the collar of the tunic, with a hem. Such collar tabs were used until 1943.The collar tabs are the same as historical samples in shape and color, made of dense cloth, the seams are even and neat. High-quality copies.Price for a set (a pair)...
7.00 €
High-quality copy of the holster to the German pistol Luger (Parabellum) P08 with a hard formed lid. Made from thick bull surface dyed leather of black color (as it was on originals: vegetable tanned leather of light beige colour was painted black on the surface, not by immersion in paint). The edges and cuts of the skin are painted black after parts have been manufactured or assembled, which was also the norm for the early production of leather gear in the Reich. Another standard for black leather products in the Reich was painted black hardware (buckle here). There is a leather strap under the lid for fast pull out a pistol from a holster. Side leather pocket is for the cartridge mag.The rear side of the holster is stamped with the military model name P08 in large letters 18 mm high, als..
75.00 €
High-quality copy of the holster to the German pistol Walther P38 with a hard formed lid. Made from thick bull surface dyed leather of black color (as it was on originals: vegetable tanned leather of light beige colour was painted black on the surface, not by immersion in paint). The edges and cuts of the skin are painted black after parts have been manufactured or assembled, which was also the norm for the early production of leather gear in the Reich. Another standard for black leather products in the Reich was painted black hardware (buckle here). There is a leather strap under the lid for fast pull out a pistol from a holster. Side leather pocket is for the cartridge mag.The rear side of the holster is stamped with the military model name P38 in large letters 18 mm high, also stamped b..
75.00 €
Mint original holster for the German pistol Walter P-38, the so-called "soft shell". Unlike the “hard-shell” or “koffer”, where the front and lid details are extruded from hard leather, this holster is made of thinner leather and more compact. The holster was produced during the Second World war by the manufacturer number 0/0833/0007 (Hans Römer from the city of Neu Ulm). On the back, the model of pistol P38 is pressed in large letters, the manufacturer code in the Reich enterprise system (RB.Nr.) and the WaA military acceptance stamp (eagle).The original gun fits great, as does the spare magazine. The first time might be tight anyway. Use leather shoe softener to bring the holster to its working form after the long storage. To maintain the leather in good condition, you can use products b..
130.00 €
Black painted genuine leather strap for peaked-caps of privates and non-commissioned officers of the Heer. Very high quality. Sold without buttons...
18.00 €
The 1931 model field bottle strap is made in the best traditions of pre-war German industry. Gorgeous glossy leather, aluminum hook and buckle, brand new shiny cap with pink rubber gasket. There are options for the standard infantry flask of the Heer and the SS (volume of 0.8 liters) and the jäger (mountain) flask (with a volume of 1 liter). All nuances are observed. The skin itself is vegetable-tanned, gently beige, painted black on the outside (along with cuts). Original aluminum buckle, painted black, as on earlier products. The hook is also original, a batch of these hooks was bought by us from a warehouse in Germany. On the inside of the strap is an inkmark. there is an additional piece of leather in the hook fastener (reinforcement pad), as it was on the originals.The strap is ready ..
65.00 €
A black strap made of artificial leather (or dermatine) was installed on the peaked-caps of enlisted men and non-commissioned officers of the Heer.Clasp buttons (painted black) for securing the cord are included!..
12.00 €
Aluminum ID disk (dog-tag) of German soldier of World War II — Erkennungsmarke. Quality copy. Size 5x7 cm.We don't write on dog-tags...
6.00 €
Steel ID disk (dog-tag) of German soldier of World War II — Erkennungsmarke. High quality copy. Size 5x7 cm.We don't write on dog-tags...
3.50 €
Steel ID disk (dog-tag) of German soldier of World War II — Erkennungsmarke. High quality copy. Galvanizing does not crumble and does not peel off after stuffing. Size 5x7 cm.We don't write on dog-tags...
4.50 €
The color of the threads, cloth and lining may be slightly different from batch to batch (and from the photo), but always remains within the historical compliance.Cap produced by "Replika" in Russia. We carefully studied the original caps and created our own copy. We declare that it is the best copy of the M43 cap in the world (here it is necessary to consider that there were many variations of M43s, they were sewn on tens of the enterprises; seams, even length of the visor were a little different). At the same time our copy is very carefully sewn, the highest factory quality.Original caps have differences depending on the year of production and the manufacturer. We collected the characteristic features of the early assembly in our cap (seams, cut, etc.) common for 1943 production. For exa..
25.00 €
Cap of blue-gray cloth with one 19-mm button. Lining of brownish-beige artificial silk (cotton in 1943 was no longer used for lining, because cotton had become a deficit by that time). Button is aluminum, painted in pale blue. The cap has loops in order to keep the ears when they are down. Ink stamp with the manufacturer number, size and year of production is on the cupola.Visor has standard length (6-7 cm), not shortened, inside is insert of soft, supple material that is water-resistant. Our material is reliable to aging and resistant to water (washing). The visor is soft, easy to bend, and when the cap is on the head, the visor he takes the form of a beautiful arc. It can be given the triangular shape (as happened with worn caps of veterans). The visor should be strongly bent for this — ..
25.00 €
Replica camouflage double-sided SS cap. Made in Russia according to patterns developed by the Replika store on the basis of original samples. Camouflage fabric of our own production, dense cotton material. On one side green shades of spots for summer, on the other brown for autumn. The cap has the correct shape of the bottom (an inverted egg). To the right and to the left there are 2 air vents treated with a thread (the metal edging of the holes was was rarely found on such caps and on the latest series).In the visor inlay is not afraid of temperature changes, does not break. It's shape-remembering, that is, the visor can be worn bended in any shape you like. Cap can be washed in a washing machine.On the "autumn" side there is a sweat-tape, it also closes the rim of th..
30.00 €
Porcelain mug with the symbols of BMW factories (Bayerische Motorenwerke = Bavarian Motor Factories) and with the hallmark of the Beauty Work Bureau (Schönheit der Arbeit).BMW was founded in 1916, initially as a manufacturer of aircraft engines. It is believed that the place was chosen for the purpose of cooperation (and proximity) with a well-known aircraft manufacturer in Bavaria. By the mid-1930s, the company was Europe's largest industrial concern. It produced aircraft engines, automobiles, and many smaller equipment and parts. During the Second World War, like many German companies, it used free labor from prisoners of war and the regime. Developed and implemented missile weapons and other types of advanced military technologies.After the war, despite a series of prohibitions and the ..
8.00 €
This book is about book German soldier of WW2: uniform, equpment and private belongings. You will find almost all items of Third Reich Heer soldier on 312 full-coloured pages . From the very beginning to the end of war, both pictures of original items and their history in small texts.A bible for Wehrmacht reenactor!Book is in English + original names of items. Condition: new, packed. LanguageEnglishFormat305х220 (А4), width 25 ммPages312Paper and coverglossy, hardcoverPublisherAndrea press, UKYear of publication2008, many reprints..
125.00 €
A book about modern war archeology. History of 2 men with shovels that met occasionally in forest. It immerse to strange Russian war forest atmosphere that usually hidden from a routine man.LanguageRussianFormat120х176 (А5-), width 9 mmPages160Paper and covercoated, soft, flaps contain photoPublisherEditus, MoscowYear of publication2012..
5.00 €
Guide to the uniform of the US military in Vietnam (1962-67). Each spread is dedicated to one type of form. Color photos, all objects are original, not complicated descriptions for illustrations.LanguageEnglishFormat200х240 (А4 -), width 8 ммPages66Paper and coverglossy, softcoverPublisherHistoire&Collections, FranceYear of publication2012..
21.42 €
Photo and description of the uniform of the First World War of all participating countries. Original items, color photographs. A great guide for the novice collector and reenactor!LanguageEnglishFormat165х230 (А4 -), толщина 11 ммPages84Paper and coverglossy, softcoverPublisherHistoire&Collections, FranceYear of publication2013..
32.00 €
Original cardboard box for 10 rounds of ammunition for the MG machine gun, Mauser carbine and other weapons of 7.92 mm caliber. The year 1939 is stamped on the cardboard, and the label says 1940/1...
7.00 €
Price for 10 cm (1 decimeter).Braid (edging, galloon, soutache) is a good copy. The edging is slightly shiny, as it should be. It is made of metallic thread and feels cold to the touch. It is not a cheap copy of lurex (synthetic plastic threads).We offer 2 colors: silver (officers) and gold (generals). You must select an option (color) before putting it in the basket. If a color is not available for selection, then it has already been sold.How to sew on?The edging should be inserted between the parts of the cap and then sewn together. For different headdresses, the edging is sewn in different places. On visor-cap around the bottom, on side-cap around the bottom and in front part of the lapel. See photos of originals in available sources. You can measure how much edging you need with a piec..
0.30 €
Price per 10 cm (1 decimeter). We offer special wholesale price from quantity of 25 m (the same: 250 dm or 1 reel).Braid (or galloon, soutache) — an exact copy. Braid is a little shiny, as it should be. Braid doesn't contain metal thread. However, no modern copy on this price level contains metal thread. Metal thread mass production ceased in the second half of the XX century due to the enormous cost compared to non-metallic ones.Comparison of our braid with the original (photo by Liau Wesley):You need 7 dm for the collar and appr. the same for shoulder straps. We recommend to take 1.5 meters (15 dm) to finish the jacket along with shoulder straps. You can take less if you're sure. But please remember about the turning ends and about the curves (for example, along the collar and at th..
0.20 €
The price is for 25 meters of braid.Braid (or galloon, soutache) — an exact copy. Braid is a little shiny, as it should be. Braid doesn't contain metal thread. However, no modern copy on this price level contains metal thread. Metal thread mass production ceased in the second half of the XX century due to the enormous cost compared to non-metallic ones. Comparison of our braid with the original (photo by Liau Wesley): ..
28.35 €
Split-pins attach the liner to the sphere of the helmet to get a complete helmet. These pins often break on original helmets during disassemble process, so they are replaced with copies.Our split-pins are made on factory machinery and are copies of museum quality. They are very difficult to distinguish from originals if a person does not understand the stamps and the production history of the German helmets. Brass clasps are made entirely of brass and have golden color. The cap should be painted in the color of the helmet after installation.Price is per set (3 pieces)...
12.00 €
The strap of the ex- West German army (BRD, Bundesrepublik Deutschland). It's similar to the waist belt of the Wehrmacht in design, but wider (width is 5 cm as opposed to 4.5 in the Wehrmacht). So buckles are not interchangeable between them. The belt has a hook at the end, it clings to the buckle's bracket. Leather is smooth side on the inside (like the Wehrmacht) and the outer side is covered with smooth paint. This belt is waistbelt, it is hard enough to hold the weight of the equipment. It may be used as a belt for trousers. The buckle included!It is theoretically possible to alter this belt to the belt of the Wehrmacht, to do so, cut neatly 2-3 mm along each side. Without alteration is a great leather belt in German style, but without the prohibited symbols on the buckle.Large sizes a..
12.00 €
The copy of German WW2 bread bag. Made of tarpaulin of dark olive color, steel fittings, covered with gray paint. The leather details are sewn on by hand. No manufacturer's marks. This model has been produced since 1940.Price for 1 bag. Other items that can be seen in the photos are given for understanding the color and size of the product, are not included in the price of this product, but are sold as separate products on our website...
35.00 €
The copy of German WW2 bread bag. Made of tarpaulin of dark olive color, steel fittings, covered with gray paint. The leather details are sewn on by hand. No manufacturer's marks. This model has been produced since 1940.Price for 1 bag. Other items that can be seen in the photos are given for understanding the color and size of the product, are not included in the price of this product, but are sold as separate products on our website...
35.00 €
A copy of German WW2 bread bag: early, with leather reinforcements. It is made of tarpaulin (avisent) of dark olive color. Leather details sewn by hand. No stamp. We have bags with parts either in black or brown leather.You need to choose the color of the leather parts before putting the bag into the cart...
33.00 €
Made of dense khaki fabric, steel fittings painted gray. Black leather details...
15.00 €
Made of dense khaki fabric, steel fittings painted gray. Brown leather details...
15.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.The eagle is embroidered with gray thread on cloth. Classic breast eagle on the jacket of Luftwaffe soldiers. Size 10x5 cm.To see additional photos please follow the link.How to sew the patch? Attach the patch to the uniform so that it sits well. Glue the patch or fasten it in another way (for example, stitch it with a thread of noti..
12.00 €
This product is intended for military-historical reenactment (immersive study of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose!The insignias are of very high quality, have a smooth geometry and fine details. Manufacturing method: BeVo.To see additional photos please follow the link.We offer several insignia options:• Subdued — pale gray-green color of the base, gray eagle.• Green — green base color, gray eagle.Why such colors? Read the historical reference below. Photo of subdued and green shades of the insignia .The ..
6.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.Such insignia on a triangular flap (for ease of sewing) appeared in 1944. Our insignia are made of very high quality, have smooth geometry and fine details. Manufacturing method: BeVo.To see additional photos please follow the link.We offer several insignia options:• Subdued — pale gray-green color ..
10.00 €
The copy of the trousers for the soldiers of the German African Corps (Deutsches Afrikakorps, DAK) during the Second World War. The color is green, as it was for the new tropical uniform of the Wehrmacht. The sand-colored uniform was used by the SS and the Luftwaffe. The material is breathable durable cotton.Trousers of the breeches style are not officers in this case, they were worn by both soldiers and officers. Trousers with a narrowing below the knee were designed to be worn with high laced boots. There were straight trousers for shoes, which we also sell...
102.00 €
This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.If you need additional photos of the product, write to us by email or in the messenger.The badge is 39x48 mm, has letters D.R.L within a wreath with swastika in relief. Complete with the correct German style hinge and full makers name on the reverse. Sports Badge was often worn on the military uniform. ..
27.00 €