WSS sleeve eagle BeVo type 1

8.00 €
In Stock
Shipping from 4.10 €

Description

This product is intended for military-historical reenactment (immersive stydy of history); for creating costumes for theatrical and film, video plays condemning Nazism and fascism; as well as for exhibiting in museums of military history. This product is not propaganda of ideas and criminals convicted by an International Military Tribunal, and should not be used for such a purpose! The photos have been edited in accordance with the requirements of the law.

SS eagle insignia, BeVo production method (modern machine), dirty white (ivory) thread on a black background. The size of the eagle together with the black outline is about 9x4 cm. The details are smooth and beautiful, the thread is thick, as on the original.

To see additional photos please follow the link.

How to sew the patch?

There are 2 ways.

I. The original way, so they were sewn in the Third Reich. Trim the excess around the eagle with a margin of 5 mm. Fold this 5 mm margin under the patch on all sides and iron it (you may use glue). Fix the patch on the left sleeve of the field jacket so it would be 15 cm from the seam (where the shoulder strap) to the upper edge of the patch. You can fix it with a bright thread (which shall then be removed). When the patch sits evenly and beautifully, it must be sewn with a black thread over the edge. At the end of the war, patches were sewn on a machine with a zigzag stitch. You can simulate a machine seam. In the end, you need to remove the bright threads that secured the patch.

II. A method for reenactment (easier). Remove threads from the inside of the patch to make it thinner using scissors or a razor. Glue the patch on thin paper or fabric with tailor's glue or PVA and dry it with an iron (if the glue is liquid, it should be poured as little as possible so that it does not leak onto the front side). Trim the eagle without margins. Fix the patch on the clothes with a few stitches of thread of bright color or glue so that it sits evenly. Sew as described in method I. Remove the bright threads that secured the patch.